From: Yanteng Si <si.yanteng@linux.dev>
To: Yao Zi <ziyao@disroot.org>, Andrew Lunn <andrew+netdev@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Huacai Chen <chenhuacai@kernel.org>,
"Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>,
Philipp Stanner <phasta@kernel.org>,
Tiezhu Yang <yangtiezhu@loongson.cn>,
Qunqin Zhao <zhaoqunqin@loongson.cn>,
Vladimir Oltean <vladimir.oltean@nxp.com>,
Furong Xu <0x1207@gmail.com>,
Kunihiko Hayashi <hayashi.kunihiko@socionext.com>,
Jacob Keller <jacob.e.keller@intel.com>
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
Mingcong Bai <jeffbai@aosc.io>,
Kexy Biscuit <kexybiscuit@aosc.io>
Subject: Re: [PATCH net-next v5 1/3] net: stmmac: Add generic suspend/resume helper for PCI-based controllers
Date: Wed, 26 Nov 2025 11:10:14 +0800 [thread overview]
Message-ID: <6603d8fa-fd29-4f6c-8150-36fd02e78d22@linux.dev> (raw)
In-Reply-To: <20251124160417.51514-2-ziyao@disroot.org>
在 2025/11/25 00:04, Yao Zi 写道:
> Most glue driver for PCI-based DWMAC controllers utilize similar
> platform suspend/resume routines. Add a generic implementation to reduce
> duplicated code.
>
> Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Yanteng Si<siyanteng@cqsoftware.com.cn>
Thanks,
Yanteng
> ---
> drivers/net/ethernet/stmicro/stmmac/Kconfig | 5 ++
> drivers/net/ethernet/stmicro/stmmac/Makefile | 1 +
> .../ethernet/stmicro/stmmac/stmmac_libpci.c | 48 +++++++++++++++++++
> .../ethernet/stmicro/stmmac/stmmac_libpci.h | 12 +++++
> 4 files changed, 66 insertions(+)
> create mode 100644 drivers/net/ethernet/stmicro/stmmac/stmmac_libpci.c
> create mode 100644 drivers/net/ethernet/stmicro/stmmac/stmmac_libpci.h
>
> diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig
> index 87c5bea6c2a2..15ed5c1d071a 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
> +++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
> @@ -349,6 +349,11 @@ config DWMAC_VISCONTI
>
> endif
>
> +config STMMAC_LIBPCI
> + tristate
> + help
> + This option enables the PCI bus helpers for the stmmac driver.
> +
> config DWMAC_INTEL
> tristate "Intel GMAC support"
> default X86
> diff --git a/drivers/net/ethernet/stmicro/stmmac/Makefile b/drivers/net/ethernet/stmicro/stmmac/Makefile
> index 1681a8a28313..7bf528731034 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/Makefile
> +++ b/drivers/net/ethernet/stmicro/stmmac/Makefile
> @@ -44,6 +44,7 @@ obj-$(CONFIG_DWMAC_VISCONTI) += dwmac-visconti.o
> stmmac-platform-objs:= stmmac_platform.o
> dwmac-altr-socfpga-objs := dwmac-socfpga.o
>
> +obj-$(CONFIG_STMMAC_LIBPCI) += stmmac_libpci.o
> obj-$(CONFIG_STMMAC_PCI) += stmmac-pci.o
> obj-$(CONFIG_DWMAC_INTEL) += dwmac-intel.o
> obj-$(CONFIG_DWMAC_LOONGSON) += dwmac-loongson.o
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_libpci.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_libpci.c
> new file mode 100644
> index 000000000000..5c5dd502f79a
> --- /dev/null
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_libpci.c
> @@ -0,0 +1,48 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * PCI bus helpers for STMMAC driver
> + * Copyright (C) 2025 Yao Zi <ziyao@disroot.org>
> + */
> +
> +#include <linux/device.h>
> +#include <linux/pci.h>
> +
> +#include "stmmac_libpci.h"
> +
> +int stmmac_pci_plat_suspend(struct device *dev, void *bsp_priv)
> +{
> + struct pci_dev *pdev = to_pci_dev(dev);
> + int ret;
> +
> + ret = pci_save_state(pdev);
> + if (ret)
> + return ret;
> +
> + pci_disable_device(pdev);
> + pci_wake_from_d3(pdev, true);
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(stmmac_pci_plat_suspend);
> +
> +int stmmac_pci_plat_resume(struct device *dev, void *bsp_priv)
> +{
> + struct pci_dev *pdev = to_pci_dev(dev);
> + int ret;
> +
> + pci_restore_state(pdev);
> + pci_set_power_state(pdev, PCI_D0);
> +
> + ret = pci_enable_device(pdev);
> + if (ret)
> + return ret;
> +
> + pci_set_master(pdev);
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(stmmac_pci_plat_resume);
> +
> +MODULE_DESCRIPTION("STMMAC PCI helper library");
> +MODULE_AUTHOR("Yao Zi <ziyao@disroot.org>");
> +MODULE_LICENSE("GPL");
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_libpci.h b/drivers/net/ethernet/stmicro/stmmac/stmmac_libpci.h
> new file mode 100644
> index 000000000000..71553184f982
> --- /dev/null
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_libpci.h
> @@ -0,0 +1,12 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Copyright (C) 2025 Yao Zi <ziyao@disroot.org>
> + */
> +
> +#ifndef __STMMAC_LIBPCI_H__
> +#define __STMMAC_LIBPCI_H__
> +
> +int stmmac_pci_plat_suspend(struct device *dev, void *bsp_priv);
> +int stmmac_pci_plat_resume(struct device *dev, void *bsp_priv);
> +
> +#endif /* __STMMAC_LIBPCI_H__ */
next prev parent reply other threads:[~2025-11-26 3:10 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-11-24 16:04 [PATCH net-next v5 0/3] Unify platform suspend/resume routines for PCI DWMAC glue Yao Zi
2025-11-24 16:04 ` [PATCH net-next v5 1/3] net: stmmac: Add generic suspend/resume helper for PCI-based controllers Yao Zi
2025-11-25 17:15 ` Russell King (Oracle)
2025-11-26 3:10 ` Yanteng Si [this message]
2025-11-24 16:04 ` [PATCH net-next v5 2/3] net: stmmac: loongson: Use generic PCI suspend/resume routines Yao Zi
2025-11-24 16:04 ` [PATCH net-next v5 3/3] net: stmmac: pci: " Yao Zi
2025-11-27 1:20 ` [PATCH net-next v5 0/3] Unify platform suspend/resume routines for PCI DWMAC glue patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=6603d8fa-fd29-4f6c-8150-36fd02e78d22@linux.dev \
--to=si.yanteng@linux.dev \
--cc=0x1207@gmail.com \
--cc=andrew+netdev@lunn.ch \
--cc=chenhuacai@kernel.org \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=hayashi.kunihiko@socionext.com \
--cc=jacob.e.keller@intel.com \
--cc=jeffbai@aosc.io \
--cc=kexybiscuit@aosc.io \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=phasta@kernel.org \
--cc=rmk+kernel@armlinux.org.uk \
--cc=vladimir.oltean@nxp.com \
--cc=yangtiezhu@loongson.cn \
--cc=zhaoqunqin@loongson.cn \
--cc=ziyao@disroot.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).