RE: [PATCH net-next] rtase: Add ndo_setup_tc support for CBS offload in traffic control setup

[Justin Lai <justinlai0215@realtek.com>]

> On Fri, Mar 14, 2025 at 05:40:21PM +0800, Justin Lai wrote:
> > Add support for ndo_setup_tc to enable CBS offload functionality as
> > part of traffic control configuration for network devices.
> >
> > Signed-off-by: Justin Lai <justinlai0215@realtek.com>
> 
> ...
> 
> > diff --git a/drivers/net/ethernet/realtek/rtase/rtase_main.c
> > b/drivers/net/ethernet/realtek/rtase/rtase_main.c
> > index 2aacc1996796..2a61cd192026 100644
> > --- a/drivers/net/ethernet/realtek/rtase/rtase_main.c
> > +++ b/drivers/net/ethernet/realtek/rtase/rtase_main.c
> > @@ -1661,6 +1661,54 @@ static void rtase_get_stats64(struct net_device
> *dev,
> >       stats->rx_length_errors = tp->stats.rx_length_errors;  }
> >
> > +static void rtase_set_hw_cbs(const struct rtase_private *tp, u32
> > +queue) {
> > +     u32 idle = tp->tx_qos[queue].idleslope * RTASE_1T_CLOCK;
> > +     u32 val, i;
> > +
> > +     val = u32_encode_bits(idle / RTASE_1T_POWER,
> RTASE_IDLESLOPE_INT_MASK);
> > +     idle %= RTASE_1T_POWER;
> > +
> > +     for (i = 1; i <= RTASE_IDLESLOPE_INT_SHIFT; i++) {
> > +             idle *= 2;
> > +             if ((idle / RTASE_1T_POWER) == 1)
> > +                     val |= BIT(RTASE_IDLESLOPE_INT_SHIFT - i);
> > +
> > +             idle %= RTASE_1T_POWER;
> > +     }
> > +
> > +     rtase_w32(tp, RTASE_TXQCRDT_0 + queue * 4, val); }
> > +
> > +static void rtase_setup_tc_cbs(struct rtase_private *tp,
> > +                            const struct tc_cbs_qopt_offload *qopt) {
> > +     u32 queue = qopt->queue;
> 
> Hi Justin,
> 
> Does queue need to be checked somewhere to make sure it is in range?

Hi Simon,

Thank you for your response. I will add a check to ensure that the
queue is within the specified range.
> 
> > +
> > +     tp->tx_qos[queue].hicredit = qopt->hicredit;
> > +     tp->tx_qos[queue].locredit = qopt->locredit;
> > +     tp->tx_qos[queue].idleslope = qopt->idleslope;
> > +     tp->tx_qos[queue].sendslope = qopt->sendslope;
> 
> Does qopt->enable need to be honoured in order to allow the offload to be
> both enabled and disabled?
> 
Thank you for your suggestion. I will add a check for qopt->enable and
handle it appropriately.

> > +
> > +     rtase_set_hw_cbs(tp, queue);
> > +}
> > +
> > +static int rtase_setup_tc(struct net_device *dev, enum tc_setup_type type,
> > +                       void *type_data) {
> > +     struct rtase_private *tp = netdev_priv(dev);
> > +
> > +     switch (type) {
> > +     case TC_SETUP_QDISC_CBS:
> > +             rtase_setup_tc_cbs(tp, type_data);
> > +             break;
> > +     default:
> > +             return -EOPNOTSUPP;
> > +     }
> > +
> > +     return 0;
> > +}
> > +
> >  static netdev_features_t rtase_fix_features(struct net_device *dev,
> >                                           netdev_features_t
> features)
> > {
> 
> ...