Re: [net-next PATCH 2/2] net: airoha: add phylink support for GDM1

[Christian Marangi <ansuelsmth@gmail.com>]

On Wed, Oct 22, 2025 at 04:45:43PM +0100, Simon Horman wrote:
> On Tue, Oct 21, 2025 at 09:33:12PM +0200, Christian Marangi wrote:
> 
> ...
> 
> > +static int airoha_setup_phylink(struct net_device *netdev)
> > +{
> > +	struct airoha_gdm_port *port = netdev_priv(netdev);
> > +	struct device *dev = &netdev->dev;
> > +	phy_interface_t phy_mode;
> 
> Hi Christian,
> 
> phy_interface_t is an enum and thus may in practice be unsigned...
> 
> > +	struct phylink *phylink;
> > +
> > +	phy_mode = device_get_phy_mode(dev);
> > +	if (phy_mode < 0) {
> 
> ... if so, this condition will always be false.
> 
> I suspect the correct approach here is to change the type of phy_mode to int.
> 
> Flagged by Smatch.
>

Thanks a lot for pointing this out. Also I'm a bit confused of why
device_get_phy_mode changed the args deviated from the of variant that
return int and required an additional arg for the interface...

> > +		dev_err(dev, "incorrect phy-mode\n");
> > +		return phy_mode;
> > +	}
> > +
> > +	port->phylink_config.dev = dev;
> > +	port->phylink_config.type = PHYLINK_NETDEV;
> > +	port->phylink_config.mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
> > +						MAC_10000FD;
> > +
> > +	__set_bit(PHY_INTERFACE_MODE_INTERNAL,
> > +		  port->phylink_config.supported_interfaces);
> > +
> > +	phylink = phylink_create(&port->phylink_config, dev_fwnode(dev),
> > +				 phy_mode, &airoha_phylink_ops);
> > +	if (IS_ERR(phylink))
> > +		return PTR_ERR(phylink);
> > +
> > +	port->phylink = phylink;
> > +
> > +	return 0;
> > +}
> > +
> >  static int airoha_alloc_gdm_port(struct airoha_eth *eth,
> >  				 struct device_node *np, int index)
> >  {
> 
> ...
> 
> -- 
> pw-bot: cr

-- 
	Ansuel