From: Florian Fainelli <f.fainelli@gmail.com>
To: Russell King - ARM Linux <linux@armlinux.org.uk>
Cc: netdev@vger.kernel.org, privat@egil-hjelmeland.no,
andrew@lunn.ch, vivien.didelot@savoirfairelinux.com,
davem@davemloft.net, sean.wang@mediatek.com,
Woojung.Huh@microchip.com, john@phrozen.org, cphealy@gmail.com
Subject: Re: [PATCH net-next v2 3/9] net: phy: phylink: Poll link GPIOs
Date: Thu, 10 May 2018 13:32:51 -0700 [thread overview]
Message-ID: <696b48ec-db9f-5e78-c6cb-e679eb18cb9b@gmail.com> (raw)
In-Reply-To: <20180510202900.GZ16141@n2100.armlinux.org.uk>
On 05/10/2018 01:29 PM, Russell King - ARM Linux wrote:
> On Thu, May 10, 2018 at 01:17:31PM -0700, Florian Fainelli wrote:
>> From: Russell King <rmk+kernel@armlinux.org.uk>
>>
>> When using a fixed link with a link GPIO, we need to poll that GPIO to
>> determine link state changes. This is consistent with what fixed_phy.c does.
>>
>> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
>
> I'd like this to use the GPIO interrupt where available, only falling back
> to the timer approach when there's no interrupt. Unfortunately, I don't
> have much time to devote to this at the moment, having recently been away
> on vacation, and now having to work on ARM specific issues for probably
> all of the remainder of this kernel cycle.
>
> That means I won't have time to test your series on any of the boards
> I have available to me.
No worries, thanks for looking at this. Andrew and I both tested this on
the devel B and C boards where this is primarily useful. Can I still get
your SoB for the portions you authored?
I will follow up with a change that uses GPIO interrupts when they are
available.
>
>> ---
>> drivers/net/phy/phylink.c | 16 ++++++++++++++++
>> 1 file changed, 16 insertions(+)
>>
>> diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
>> index 6392b5248cf5..581ce93ecaf9 100644
>> --- a/drivers/net/phy/phylink.c
>> +++ b/drivers/net/phy/phylink.c
>> @@ -19,6 +19,7 @@
>> #include <linux/phylink.h>
>> #include <linux/rtnetlink.h>
>> #include <linux/spinlock.h>
>> +#include <linux/timer.h>
>> #include <linux/workqueue.h>
>>
>> #include "sfp.h"
>> @@ -54,6 +55,7 @@ struct phylink {
>> /* The link configuration settings */
>> struct phylink_link_state link_config;
>> struct gpio_desc *link_gpio;
>> + struct timer_list link_poll;
>> void (*get_fixed_state)(struct net_device *dev,
>> struct phylink_link_state *s);
>>
>> @@ -500,6 +502,15 @@ static void phylink_run_resolve(struct phylink *pl)
>> queue_work(system_power_efficient_wq, &pl->resolve);
>> }
>>
>> +static void phylink_fixed_poll(struct timer_list *t)
>> +{
>> + struct phylink *pl = container_of(t, struct phylink, link_poll);
>> +
>> + mod_timer(t, jiffies + HZ);
>> +
>> + phylink_run_resolve(pl);
>> +}
>> +
>> static const struct sfp_upstream_ops sfp_phylink_ops;
>>
>> static int phylink_register_sfp(struct phylink *pl,
>> @@ -572,6 +583,7 @@ struct phylink *phylink_create(struct net_device *ndev,
>> pl->link_config.an_enabled = true;
>> pl->ops = ops;
>> __set_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state);
>> + timer_setup(&pl->link_poll, phylink_fixed_poll, 0);
>>
>> bitmap_fill(pl->supported, __ETHTOOL_LINK_MODE_MASK_NBITS);
>> linkmode_copy(pl->link_config.advertising, pl->supported);
>> @@ -905,6 +917,8 @@ void phylink_start(struct phylink *pl)
>> clear_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state);
>> phylink_run_resolve(pl);
>>
>> + if (pl->link_an_mode == MLO_AN_FIXED && !IS_ERR(pl->link_gpio))
>> + mod_timer(&pl->link_poll, jiffies + HZ);
>> if (pl->sfp_bus)
>> sfp_upstream_start(pl->sfp_bus);
>> if (pl->phydev)
>> @@ -929,6 +943,8 @@ void phylink_stop(struct phylink *pl)
>> phy_stop(pl->phydev);
>> if (pl->sfp_bus)
>> sfp_upstream_stop(pl->sfp_bus);
>> + if (pl->link_an_mode == MLO_AN_FIXED && !IS_ERR(pl->link_gpio))
>> + del_timer_sync(&pl->link_poll);
>>
>> set_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state);
>> queue_work(system_power_efficient_wq, &pl->resolve);
>> --
>> 2.14.1
>>
>
--
Florian
next prev parent reply other threads:[~2018-05-10 20:33 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-10 20:17 [PATCH net-next v2 0/9] net: dsa: Plug in PHYLINK support Florian Fainelli
2018-05-10 20:17 ` [PATCH net-next v2 1/9] net: phy: phylink: Use gpiod_get_value_cansleep() Florian Fainelli
2018-05-10 20:17 ` [PATCH net-next v2 2/9] net: phy: phylink: Release link GPIO Florian Fainelli
2018-05-10 20:17 ` [PATCH net-next v2 3/9] net: phy: phylink: Poll link GPIOs Florian Fainelli
2018-05-10 20:29 ` Russell King - ARM Linux
2018-05-10 20:32 ` Florian Fainelli [this message]
2018-05-10 20:17 ` [PATCH net-next v2 4/9] net: dsa: Add PHYLINK switch operations Florian Fainelli
2018-05-10 20:17 ` [PATCH net-next v2 5/9] net: dsa: bcm_sf2: Implement phylink_mac_ops Florian Fainelli
2018-05-10 20:17 ` [PATCH net-next v2 6/9] net: dsa: Eliminate dsa_slave_get_link() Florian Fainelli
2018-05-10 20:17 ` [PATCH net-next v2 7/9] net: dsa: mv88e6xxx: add PHYLINK support Florian Fainelli
2018-05-10 20:17 ` [PATCH net-next v2 8/9] net: dsa: Plug in " Florian Fainelli
2018-05-10 20:17 ` [PATCH net-next v2 9/9] net: dsa: bcm_sf2: Get rid of PHYLIB functions Florian Fainelli
2018-05-11 16:23 ` [PATCH net-next v2 0/9] net: dsa: Plug in PHYLINK support David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=696b48ec-db9f-5e78-c6cb-e679eb18cb9b@gmail.com \
--to=f.fainelli@gmail.com \
--cc=Woojung.Huh@microchip.com \
--cc=andrew@lunn.ch \
--cc=cphealy@gmail.com \
--cc=davem@davemloft.net \
--cc=john@phrozen.org \
--cc=linux@armlinux.org.uk \
--cc=netdev@vger.kernel.org \
--cc=privat@egil-hjelmeland.no \
--cc=sean.wang@mediatek.com \
--cc=vivien.didelot@savoirfairelinux.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).