From: Zhu Yanjun <yanjun.zhu@linux.dev>
To: "Håkon Bugge" <haakon.bugge@oracle.com>,
"Jason Gunthorpe" <jgg@ziepe.ca>,
"Leon Romanovsky" <leon@kernel.org>,
"Allison Henderson" <allison.henderson@oracle.com>,
"David S . Miller" <davem@davemloft.net>,
"Eric Dumazet" <edumazet@google.com>,
"Jakub Kicinski" <kuba@kernel.org>,
"Paolo Abeni" <pabeni@redhat.com>
Cc: linux-rdma@vger.kernel.org, linux-kernel@vger.kernel.org,
netdev@vger.kernel.org, rds-devel@oss.oracle.com
Subject: Re: [MAINLINE 2/2] rds: ib: Add Dynamic Interrupt Moderation to CQs
Date: Fri, 20 Sep 2024 15:47:19 +0800 [thread overview]
Message-ID: <6971720d-3639-4a80-a17b-48489bfadb0a@linux.dev> (raw)
In-Reply-To: <20240918083552.77531-3-haakon.bugge@oracle.com>
在 2024/9/18 16:35, Håkon Bugge 写道:
> With the support from ib_core to use Dynamic Interrupt Moderation
> (DIM) from legacy ULPs, which uses ib_create_cq(), we enable that
> feature for the receive and send CQs in RDS.
Hi, Haakon
I am interested in this patch series. I just wonder if the performance
of rds is increased after DIM is used in legacy ULPs?
That is, is there any benefit to legacy ULPs after DIM is used?
Do you have any test results about this DIM?
Thanks,
Zhu Yanjun
>
> A set of rds-stress runs have been done. bcopy read + write for
> payload 8448 and 16640 bytes and ack/req of 256 bytes. Number of QPs
> varies from 8 to 128, number of threads (i.e. rds-stress processes)
> from one to 16 and a depth of four. A limit has been applied such that
> the number of processes times the number of QPs never exceeds 128. All
> in all, 61 rds-stress runs.
>
> For brevity, only the rows showing a +/- 3% deviation or larger from
> base is listed. The geometric mean of the ratios (IOPS_test /
> IOPS_base) is calculated for all 61 runs, and that gives the best
> possible "average" impact of the commits.
>
> In the following, "base" is v6.11-rc7. "test" is the same
> kernel with the following two commits:
>
> * rds: ib: Add Dynamic Interrupt Moderation to CQs (this commit)
> * RDMA/core: Enable legacy ULPs to use RDMA DIM
>
> This is executed between two X8-2 with CX-5 using fw 16.35.3502. These
> BM systems were instantiated with one VF, which were used for the
> test:
>
> base test
> ACK REQ QPS THR DEP IOPS IOPS Percent
> 256 8448 8 1 4 634463 658162 3.7
> 256 8448 8 2 4 862648 997358 15.6
> 256 8448 8 4 4 950458 1113991 17.2
> 256 8448 8 8 4 932120 1127024 20.9
> 256 8448 8 16 4 944977 1133885 20.0
> 8448 256 8 2 4 858663 975563 13.6
> 8448 256 8 4 4 934884 1098854 17.5
> 8448 256 8 8 4 928247 1116015 20.2
> 8448 256 8 16 4 938864 1123455 19.7
> 256 8448 64 1 4 965985 918445 -4.9
> 8448 256 64 1 4 963280 918239 -4.7
> 256 16640 8 2 4 544670 582330 6.9
> 256 16640 8 4 4 554873 597553 7.7
> 256 16640 8 8 4 551799 597479 8.3
> 256 16640 8 16 4 553041 597898 8.1
> 16640 256 8 2 4 544644 578331 6.2
> 16640 256 8 4 4 553944 594627 7.3
> 16640 256 8 8 4 551388 594737 7.9
> 16640 256 8 16 4 552986 596581 7.9
> Geometric mean of ratios: 1.03
>
> Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
> ---
> net/rds/ib_cm.c | 10 ++++++++++
> 1 file changed, 10 insertions(+)
>
> diff --git a/net/rds/ib_cm.c b/net/rds/ib_cm.c
> index 26b069e1999df..79603d86b6c02 100644
> --- a/net/rds/ib_cm.c
> +++ b/net/rds/ib_cm.c
> @@ -259,6 +259,7 @@ static void rds_ib_cq_comp_handler_recv(struct ib_cq *cq, void *context)
> static void poll_scq(struct rds_ib_connection *ic, struct ib_cq *cq,
> struct ib_wc *wcs)
> {
> + int ncompleted = 0;
> int nr, i;
> struct ib_wc *wc;
>
> @@ -276,7 +277,10 @@ static void poll_scq(struct rds_ib_connection *ic, struct ib_cq *cq,
> rds_ib_mr_cqe_handler(ic, wc);
>
> }
> + ncompleted += nr;
> }
> + if (cq->dim)
> + rdma_dim(cq->dim, ncompleted);
> }
>
> static void rds_ib_tasklet_fn_send(unsigned long data)
> @@ -304,6 +308,7 @@ static void poll_rcq(struct rds_ib_connection *ic, struct ib_cq *cq,
> struct ib_wc *wcs,
> struct rds_ib_ack_state *ack_state)
> {
> + int ncompleted = 0;
> int nr, i;
> struct ib_wc *wc;
>
> @@ -316,7 +321,10 @@ static void poll_rcq(struct rds_ib_connection *ic, struct ib_cq *cq,
>
> rds_ib_recv_cqe_handler(ic, wc, ack_state);
> }
> + ncompleted += nr;
> }
> + if (cq->dim)
> + rdma_dim(cq->dim, ncompleted);
> }
>
> static void rds_ib_tasklet_fn_recv(unsigned long data)
> @@ -542,6 +550,7 @@ static int rds_ib_setup_qp(struct rds_connection *conn)
> ic->i_scq_vector = ibdev_get_unused_vector(rds_ibdev);
> cq_attr.cqe = ic->i_send_ring.w_nr + fr_queue_space + 1;
> cq_attr.comp_vector = ic->i_scq_vector;
> + cq_attr.flags |= IB_CQ_MODERATE;
> ic->i_send_cq = ib_create_cq(dev, rds_ib_cq_comp_handler_send,
> rds_ib_cq_event_handler, conn,
> &cq_attr);
> @@ -556,6 +565,7 @@ static int rds_ib_setup_qp(struct rds_connection *conn)
> ic->i_rcq_vector = ibdev_get_unused_vector(rds_ibdev);
> cq_attr.cqe = ic->i_recv_ring.w_nr;
> cq_attr.comp_vector = ic->i_rcq_vector;
> + cq_attr.flags |= IB_CQ_MODERATE;
> ic->i_recv_cq = ib_create_cq(dev, rds_ib_cq_comp_handler_recv,
> rds_ib_cq_event_handler, conn,
> &cq_attr);
next prev parent reply other threads:[~2024-09-20 7:47 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-09-18 8:35 [MAINLINE 0/2] Enable DIM for legacy ULPs and use it in RDS Håkon Bugge
2024-09-18 8:35 ` [MAINLINE 1/2] RDMA/core: Enable legacy ULPs to use RDMA DIM Håkon Bugge
2024-09-18 8:35 ` [MAINLINE 2/2] rds: ib: Add Dynamic Interrupt Moderation to CQs Håkon Bugge
2024-09-20 7:47 ` Zhu Yanjun [this message]
2024-09-20 9:42 ` Haakon Bugge
2024-09-20 12:51 ` Zhu Yanjun
2024-09-21 13:43 ` Zhu Yanjun
2024-09-19 14:17 ` [MAINLINE 0/2] Enable DIM for legacy ULPs and use it in RDS Christoph Hellwig
2024-09-20 9:46 ` Haakon Bugge
2024-09-20 13:51 ` Christoph Hellwig
2024-09-21 2:28 ` Zhu Yanjun
2024-09-22 14:11 ` Leon Romanovsky
2024-09-23 12:03 ` Christoph Hellwig
2024-09-24 1:58 ` Zhu Yanjun
2024-09-24 6:54 ` Christoph Hellwig
2024-09-24 13:59 ` Zhu Yanjun
2024-09-24 15:16 ` Haakon Bugge
2024-09-25 2:04 ` Zhu Yanjun
2024-09-25 9:26 ` Leon Romanovsky
2024-09-26 15:25 ` Zhu Yanjun
2024-09-24 7:01 ` Christoph Hellwig
2024-09-24 8:59 ` Haakon Bugge
2024-09-24 15:20 ` Allison Henderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=6971720d-3639-4a80-a17b-48489bfadb0a@linux.dev \
--to=yanjun.zhu@linux.dev \
--cc=allison.henderson@oracle.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=haakon.bugge@oracle.com \
--cc=jgg@ziepe.ca \
--cc=kuba@kernel.org \
--cc=leon@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rdma@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=rds-devel@oss.oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).