public inbox for netdev@vger.kernel.org
 help / color / mirror / Atom feed
From: Justin Iurman <justin.iurman@gmail.com>
To: Tom Herbert <tom@herbertland.com>,
	davem@davemloft.net, kuba@kernel.org, netdev@vger.kernel.org
Subject: Re: [PATCH net-next v5 1/7] ipv6: Check of max HBH or DestOp sysctl is zero and drop if it is
Date: Tue, 27 Jan 2026 18:50:26 +0100	[thread overview]
Message-ID: <6ad428fe-bdfb-41a6-baaf-786663e2223d@gmail.com> (raw)
In-Reply-To: <20260126194826.236075-2-tom@herbertland.com>

On 1/26/26 20:48, Tom Herbert wrote:
> In IPv6 Destination options processing function check if
> net->ipv6.sysctl.max_dst_opts_cnt is zero up front. If it is zero then
> drop the packet since Destination Options processing is disabled.
> 
> Similarly, in IPv6 hop-by-hop options processing function check if
> net->ipv6.sysctl.max_hbh_opts_cnt is zero up front. If it is zero then
> drop the packet since Hop-by-Hop Options processing is disabled.
> 
> Signed-off-by: Tom Herbert <tom@herbertland.com>
> ---
>   net/ipv6/exthdrs.c | 18 ++++++++++--------
>   1 file changed, 10 insertions(+), 8 deletions(-)
> 
> diff --git a/net/ipv6/exthdrs.c b/net/ipv6/exthdrs.c
> index 54088fa0c09d..b9d186784b96 100644
> --- a/net/ipv6/exthdrs.c
> +++ b/net/ipv6/exthdrs.c
> @@ -301,9 +301,11 @@ static int ipv6_destopt_rcv(struct sk_buff *skb)
>   #endif
>   	struct dst_entry *dst = skb_dst(skb);
>   	struct net *net = dev_net(skb->dev);
> -	int extlen;
> +	int extlen, max_opts_cnt;
>   
> -	if (!pskb_may_pull(skb, skb_transport_offset(skb) + 8) ||
> +	max_opts_cnt = READ_ONCE(net->ipv6.sysctl.max_dst_opts_cnt);
> +	if (!max_opts_cnt ||
> +	    !pskb_may_pull(skb, skb_transport_offset(skb) + 8) ||
>   	    !pskb_may_pull(skb, (skb_transport_offset(skb) +
>   				 ((skb_transport_header(skb)[1] + 1) << 3)))) {
>   		__IP6_INC_STATS(dev_net(dst_dev(dst)), idev,
> @@ -322,8 +324,7 @@ static int ipv6_destopt_rcv(struct sk_buff *skb)
>   	dstbuf = opt->dst1;
>   #endif
>   
> -	if (ip6_parse_tlv(false, skb,
> -			  READ_ONCE(net->ipv6.sysctl.max_dst_opts_cnt))) {
> +	if (ip6_parse_tlv(false, skb, max_opts_cnt)) {
>   		skb->transport_header += extlen;
>   		opt = IP6CB(skb);
>   #if IS_ENABLED(CONFIG_IPV6_MIP6)
> @@ -1033,7 +1034,7 @@ int ipv6_parse_hopopts(struct sk_buff *skb)
>   {
>   	struct inet6_skb_parm *opt = IP6CB(skb);
>   	struct net *net = dev_net(skb->dev);
> -	int extlen;
> +	int extlen, max_opts_cnt;
>   
>   	/*
>   	 * skb_network_header(skb) is equal to skb->data, and
> @@ -1041,7 +1042,9 @@ int ipv6_parse_hopopts(struct sk_buff *skb)
>   	 * sizeof(struct ipv6hdr) by definition of
>   	 * hop-by-hop options.
>   	 */
> -	if (!pskb_may_pull(skb, sizeof(struct ipv6hdr) + 8) ||
> +	max_opts_cnt = READ_ONCE(net->ipv6.sysctl.max_hbh_opts_cnt);
> +	if (!max_opts_cnt ||
> +	    !pskb_may_pull(skb, sizeof(struct ipv6hdr) + 8) ||
>   	    !pskb_may_pull(skb, (sizeof(struct ipv6hdr) +
>   				 ((skb_transport_header(skb)[1] + 1) << 3)))) {
>   fail_and_free:
> @@ -1054,8 +1057,7 @@ int ipv6_parse_hopopts(struct sk_buff *skb)
>   		goto fail_and_free;
>   
>   	opt->flags |= IP6SKB_HOPBYHOP;
> -	if (ip6_parse_tlv(true, skb,
> -			  READ_ONCE(net->ipv6.sysctl.max_hbh_opts_cnt))) {
> +	if (ip6_parse_tlv(true, skb, max_opts_cnt)) {
>   		skb->transport_header += extlen;
>   		opt = IP6CB(skb);
>   		opt->nhoff = sizeof(struct ipv6hdr);

Reviewed-by: Justin Iurman <justin.iurman@gmail.com>

  parent reply	other threads:[~2026-01-27 17:50 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-01-26 19:48 [PATCH net-next v5 0/7] ipv6: Address ext hdr DoS vulnerabilities Tom Herbert
2026-01-26 19:48 ` [PATCH net-next v5 1/7] ipv6: Check of max HBH or DestOp sysctl is zero and drop if it is Tom Herbert
2026-01-27 17:49   ` Justin Iurman
2026-01-27 17:50   ` Justin Iurman [this message]
2026-01-26 19:48 ` [PATCH net-next v5 2/7] ipv6: Cleanup IPv6 TLV definitions Tom Herbert
2026-01-27 17:51   ` Justin Iurman
2026-01-29  5:30   ` Willem de Bruijn
2026-01-29 18:13     ` Justin Iurman
2026-01-29 19:01       ` Willem de Bruijn
2026-01-30 17:22       ` Tom Herbert
2026-02-01  8:48         ` Justin Iurman
2026-02-02 22:37           ` Tom Herbert
2026-01-26 19:48 ` [PATCH net-next v5 3/7] ipv6: Add case for IPV6_TLV_TNL_ENCAP_LIMIT in EH TLV switch Tom Herbert
2026-01-27 17:52   ` Justin Iurman
2026-01-29  5:31   ` Willem de Bruijn
2026-01-26 19:48 ` [PATCH net-next v5 4/7] ipv6: Set HBH and DestOpt limits to 2 Tom Herbert
2026-01-27 17:55   ` Justin Iurman
2026-01-26 19:48 ` [PATCH net-next v5 5/7] ipv6: Document defaults for max_{dst|hbh}_opts_number sysctls Tom Herbert
2026-01-27 17:57   ` Justin Iurman
2026-01-26 19:48 ` [PATCH net-next v5 6/7] ipv6: Enforce Extension Header ordering Tom Herbert
2026-01-27 19:48   ` Justin Iurman
2026-01-29  5:18   ` Willem de Bruijn
2026-01-29 18:07     ` Justin Iurman
2026-01-29 19:05       ` Willem de Bruijn
2026-01-29 20:13         ` Justin Iurman
2026-01-30 17:06         ` Tom Herbert
2026-01-31 17:24           ` Willem de Bruijn
2026-02-02 22:21             ` Tom Herbert
2026-01-26 19:48 ` [PATCH net-next v5 7/7] ipv6: Document enforce_ext_hdr_order sysctl Tom Herbert
2026-01-27 18:00   ` Justin Iurman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=6ad428fe-bdfb-41a6-baaf-786663e2223d@gmail.com \
    --to=justin.iurman@gmail.com \
    --cc=davem@davemloft.net \
    --cc=kuba@kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=tom@herbertland.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox