Re: [RFC PATCH v2 net-next 02/10] net: bridge: disambiguate offload_fwd_mark

[Grygorii Strashko <grygorii.strashko@ti.com>]

Hi

On 03/07/2021 14:56, Vladimir Oltean wrote:
> From: Tobias Waldekranz <tobias@waldekranz.com>
> 
> Before this change, four related - but distinct - concepts where named
> offload_fwd_mark:
> 
> - skb->offload_fwd_mark: Set by the switchdev driver if the underlying
>    hardware has already forwarded this frame to the other ports in the
>    same hardware domain.
> 
> - nbp->offload_fwd_mark: An idetifier used to group ports that share
>    the same hardware forwarding domain.
> 
> - br->offload_fwd_mark: Counter used to make sure that unique IDs are
>    used in cases where a bridge contains ports from multiple hardware
>    domains.
> 
> - skb->cb->offload_fwd_mark: The hardware domain on which the frame
>    ingressed and was forwarded.
> 
> Introduce the term "hardware forwarding domain" ("hwdom") in the
> bridge to denote a set of ports with the following property:
> 
>      If an skb with skb->offload_fwd_mark set, is received on a port
>      belonging to hwdom N, that frame has already been forwarded to all
>      other ports in hwdom N.
> 
> By decoupling the name from "offload_fwd_mark", we can extend the
> term's definition in the future - e.g. to add constraints that
> describe expected egress behavior - without overloading the meaning of
> "offload_fwd_mark".
> 
> - nbp->offload_fwd_mark thus becomes nbp->hwdom.
> 
> - br->offload_fwd_mark becomes br->last_hwdom.
> 
> - skb->cb->offload_fwd_mark becomes skb->cb->src_hwdom. The slight
>    change in naming here mandates a slight change in behavior of the
>    nbp_switchdev_frame_mark() function. Previously, it only set this
>    value in skb->cb for packets with skb->offload_fwd_mark true (ones
>    which were forwarded in hardware). Whereas now we always track the
>    incoming hwdom for all packets coming from a switchdev (even for the
>    packets which weren't forwarded in hardware, such as STP BPDUs, IGMP
>    reports etc). As all uses of skb->cb->offload_fwd_mark were already
>    gated behind checks of skb->offload_fwd_mark, this will not introduce
>    any functional change, but it paves the way for future changes where
>    the ingressing hwdom must be known for frames coming from a switchdev
>    regardless of whether they were forwarded in hardware or not
>    (basically, if the skb comes from a switchdev, skb->cb->src_hwdom now
>    always tracks which one).
> 
>    A typical example where this is relevant: the switchdev has a fixed
>    configuration to trap STP BPDUs, but STP is not running on the bridge
>    and the group_fwd_mask allows them to be forwarded. Say we have this
>    setup:
> 
>          br0
>         / | \
>        /  |  \
>    swp0 swp1 swp2
> 
>    A BPDU comes in on swp0 and is trapped to the CPU; the driver does not
>    set skb->offload_fwd_mark. The bridge determines that the frame should
>    be forwarded to swp{1,2}. It is imperative that forward offloading is
>    _not_ allowed in this case, as the source hwdom is already "poisoned".
> 
>    Recording the source hwdom allows this case to be handled properly.
> 
> Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
> ---
>   net/bridge/br_if.c        |  2 +-
>   net/bridge/br_private.h   | 10 +++++-----
>   net/bridge/br_switchdev.c | 16 ++++++++--------
>   3 files changed, 14 insertions(+), 14 deletions(-)
> 
[...]

Thank you. I very much like this patch by itself as it clarifies
properly things which caused much headache (at least for me).

I hope it can be moved forward regardless of the rest of the series.
Minor comment - It will good to add in-code doc for added/renamed struct fields.

Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>

-- 
Best regards,
grygorii