netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Heiner Kallweit <hkallweit1@gmail.com>
To: Andrew Lunn <andrew@lunn.ch>,
	Florian Fainelli <f.fainelli@gmail.com>,
	David Miller <davem@davemloft.net>
Cc: "netdev@vger.kernel.org" <netdev@vger.kernel.org>
Subject: [PATCH net-next v2 1/4] net: phy: simplify genphy_config_advert by using the linkmode_adv_to_xxx_t functions
Date: Fri, 9 Aug 2019 20:43:04 +0200	[thread overview]
Message-ID: <6ba42ade-5874-9bc9-4f4d-b80f79c0deca@gmail.com> (raw)
In-Reply-To: <755b2bc9-22cb-f529-4188-0f4b6e48efbd@gmail.com>

Using linkmode_adv_to_mii_adv_t and linkmode_adv_to_mii_ctrl1000_t
allows to simplify the code. In addition avoiding the conversion to
the legacy u32 advertisement format allows to remove the warning.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Suggested-by: Andrew Lunn <andrew@lunn.ch>
---
Changes in v2:
- added to series
---
 drivers/net/phy/phy_device.c | 22 ++++++----------------
 1 file changed, 6 insertions(+), 16 deletions(-)

diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 7ddd91df9..a70a98dc9 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -1564,24 +1564,20 @@ EXPORT_SYMBOL(phy_reset_after_clk_enable);
  */
 static int genphy_config_advert(struct phy_device *phydev)
 {
-	u32 advertise;
-	int bmsr, adv;
-	int err, changed = 0;
+	int err, bmsr, changed = 0;
+	u32 adv;
 
 	/* Only allow advertising what this PHY supports */
 	linkmode_and(phydev->advertising, phydev->advertising,
 		     phydev->supported);
-	if (!ethtool_convert_link_mode_to_legacy_u32(&advertise,
-						     phydev->advertising))
-		phydev_warn(phydev, "PHY advertising (%*pb) more modes than genphy supports, some modes not advertised.\n",
-			    __ETHTOOL_LINK_MODE_MASK_NBITS,
-			    phydev->advertising);
+
+	adv = linkmode_adv_to_mii_adv_t(phydev->advertising);
 
 	/* Setup standard advertisement */
 	err = phy_modify_changed(phydev, MII_ADVERTISE,
 				 ADVERTISE_ALL | ADVERTISE_100BASE4 |
 				 ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM,
-				 ethtool_adv_to_mii_adv_t(advertise));
+				 adv);
 	if (err < 0)
 		return err;
 	if (err > 0)
@@ -1598,13 +1594,7 @@ static int genphy_config_advert(struct phy_device *phydev)
 	if (!(bmsr & BMSR_ESTATEN))
 		return changed;
 
-	/* Configure gigabit if it's supported */
-	adv = 0;
-	if (linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT,
-			      phydev->supported) ||
-	    linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
-			      phydev->supported))
-		adv = ethtool_adv_to_mii_ctrl1000_t(advertise);
+	adv = linkmode_adv_to_mii_ctrl1000_t(phydev->advertising);
 
 	err = phy_modify_changed(phydev, MII_CTRL1000,
 				 ADVERTISE_1000FULL | ADVERTISE_1000HALF,
-- 
2.22.0



  reply	other threads:[~2019-08-09 18:45 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-09 18:41 [PATCH net-next v2 0/4] net: phy: realtek: add support for integrated 2.5Gbps PHY in RTL8125 Heiner Kallweit
2019-08-09 18:43 ` Heiner Kallweit [this message]
2019-08-09 19:07   ` [PATCH net-next v2 1/4] net: phy: simplify genphy_config_advert by using the linkmode_adv_to_xxx_t functions Andrew Lunn
2019-08-09 18:43 ` [PATCH net-next v2 2/4] net: phy: prepare phylib to deal with PHY's extending Clause 22 Heiner Kallweit
2019-08-09 18:44 ` [PATCH net-next v2 3/4] net: phy: add phy_modify_paged_changed Heiner Kallweit
2019-08-09 19:09   ` Andrew Lunn
2019-08-09 18:45 ` [PATCH net-next v2 4/4] net: phy: realtek: add support for the 2.5Gbps PHY in RTL8125 Heiner Kallweit
2019-08-09 19:18   ` Andrew Lunn
2019-08-09 19:31     ` Heiner Kallweit
2019-08-09 22:54       ` Andrew Lunn
2019-08-12  4:24 ` [PATCH net-next v2 0/4] net: phy: realtek: add support for integrated " David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=6ba42ade-5874-9bc9-4f4d-b80f79c0deca@gmail.com \
    --to=hkallweit1@gmail.com \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=f.fainelli@gmail.com \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).