* Re: 2.6.23-rc3 and SKY2 driver issue [not found] <663186.13204.qm@web90403.mail.mud.yahoo.com> @ 2007-08-16 8:25 ` Michal Piotrowski 2007-08-16 13:05 ` Stephen Hemminger 0 siblings, 1 reply; 6+ messages in thread From: Michal Piotrowski @ 2007-08-16 8:25 UTC (permalink / raw) To: James Corey; +Cc: linux-kernel, Netdev, Stephen Hemminger [Adding Stephen and netdev to CC] On 15/08/07, James Corey <ploversegg@yahoo.com> wrote: > > I tried running a D-link gig card on kernel 2.6.21.1 > and it came up fine, but when I did a sftp of > an linux dvd ISO to it, the interface would lock > up hard with the error > > eth1: hw csum failure. > > Call Trace: > <IRQ> [<ffffffff804d3e31>] > __skb_checksum_complete_head+0x46/0x5f > [<ffffffff804d3e56>] __skb_checksum_complete+0xc/0x11 > [<ffffffff805046c7>] tcp_v4_rcv+0x157/0x810 > [<ffffffff804d8a6f>] dev_queue_xmit+0x237/0x260 > [<ffffffff80229990>] find_busiest_group+0x252/0x684 > [<ffffffff804ead50>] ip_local_deliver+0xca/0x14c > [<ffffffff804eb24a>] ip_rcv+0x478/0x4ba > [<ffffffff803ec7d3>] sky2_poll+0x6f9/0x9b9 > [<ffffffff8022bd5d>] > run_rebalance_domains+0x13e/0x408 > [<ffffffff804d877a>] net_rx_action+0xa8/0x166 > [<ffffffff80235d62>] __do_softirq+0x55/0xc3 > [<ffffffff8020a4ec>] call_softirq+0x1c/0x28 > [<ffffffff8020b611>] do_softirq+0x2c/0x7d > [<ffffffff8020b8cf>] do_IRQ+0x13e/0x15f > [<ffffffff802086ce>] mwait_idle+0x0/0x46 > [<ffffffff80209871>] ret_from_intr+0x0/0xa > <EOI> [<ffffffff80208710>] mwait_idle+0x42/0x46 > [<ffffffff80208666>] cpu_idle+0x8c/0xaf > [<ffffffff8078174e>] start_kernel+0x2ac/0x2b8 > [<ffffffff80781140>] _sinittext+0x140/0x144 > > > So I tried running the latest snapshot 2.6.23-rc3 > and the almost the same thing happens. Only > difference is that now the entire box locks up. > The error is almost the same > > eth1: hw csum failure. > > Call Trace: > <IRQ> [<ffffffff804779b6>] > __skb_checksum_complete_head+0x43/0x56 > [<ffffffff804779d5>] __skb_checksum_complete+0xc/0x11 > [<ffffffff804a989d>] tcp_v4_rcv+0x14e/0x801 > [<ffffffff8048ff84>] ip_local_deliver+0xca/0x14c > [<ffffffff80490472>] ip_rcv+0x46c/0x4ae > [<ffffffff880060f9>] :sky2:sky2_poll+0x72b/0x9c7 > [<ffffffff8047c934>] net_rx_action+0xa8/0x166 > [<ffffffff80235ced>] __do_softirq+0x55/0xc4 > [<ffffffff8020c5cc>] call_softirq+0x1c/0x28 > [<ffffffff8020d6fd>] do_softirq+0x2c/0x7d > [<ffffffff8020d9bb>] do_IRQ+0x13e/0x15f > [<ffffffff8020a780>] mwait_idle+0x0/0x48 > [<ffffffff8020b951>] ret_from_intr+0x0/0xa > <EOI> [<ffffffff880063e7>] > :sky2:sky2_xmit_frame+0x0/0x41d > [<ffffffff8020a7c2>] mwait_idle+0x42/0x48 > [<ffffffff8020a718>] cpu_idle+0xbd/0xe0 > [<ffffffff80704a5a>] start_kernel+0x2ac/0x2b8 > [<ffffffff80704140>] _sinittext+0x140/0x144 > > > I see that the new kernel includes some sort of > SKY2 DEBUG stuff. I would be happy to rerun > the test with that turned on, given some minor > direction. > Regards, Michal -- LOG http://www.stardust.webpages.pl/log/ ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: 2.6.23-rc3 and SKY2 driver issue 2007-08-16 8:25 ` 2.6.23-rc3 and SKY2 driver issue Michal Piotrowski @ 2007-08-16 13:05 ` Stephen Hemminger 2007-08-20 15:42 ` James Corey 0 siblings, 1 reply; 6+ messages in thread From: Stephen Hemminger @ 2007-08-16 13:05 UTC (permalink / raw) To: Michal Piotrowski; +Cc: James Corey, linux-kernel, Netdev On Thu, 16 Aug 2007 10:25:45 +0200 "Michal Piotrowski" <michal.k.k.piotrowski@gmail.com> wrote: > [Adding Stephen and netdev to CC] > > On 15/08/07, James Corey <ploversegg@yahoo.com> wrote: > > > > I tried running a D-link gig card on kernel 2.6.21.1 > > and it came up fine, but when I did a sftp of > > an linux dvd ISO to it, the interface would lock > > up hard with the error > > > > eth1: hw csum failure. > > > > Call Trace: > > <IRQ> [<ffffffff804d3e31>] > > __skb_checksum_complete_head+0x46/0x5f > > [<ffffffff804d3e56>] __skb_checksum_complete+0xc/0x11 > > [<ffffffff805046c7>] tcp_v4_rcv+0x157/0x810 > > [<ffffffff804d8a6f>] dev_queue_xmit+0x237/0x260 > > [<ffffffff80229990>] find_busiest_group+0x252/0x684 > > [<ffffffff804ead50>] ip_local_deliver+0xca/0x14c > > [<ffffffff804eb24a>] ip_rcv+0x478/0x4ba > > [<ffffffff803ec7d3>] sky2_poll+0x6f9/0x9b9 > > [<ffffffff8022bd5d>] > > run_rebalance_domains+0x13e/0x408 > > [<ffffffff804d877a>] net_rx_action+0xa8/0x166 > > [<ffffffff80235d62>] __do_softirq+0x55/0xc3 > > [<ffffffff8020a4ec>] call_softirq+0x1c/0x28 > > [<ffffffff8020b611>] do_softirq+0x2c/0x7d > > [<ffffffff8020b8cf>] do_IRQ+0x13e/0x15f > > [<ffffffff802086ce>] mwait_idle+0x0/0x46 > > [<ffffffff80209871>] ret_from_intr+0x0/0xa > > <EOI> [<ffffffff80208710>] mwait_idle+0x42/0x46 > > [<ffffffff80208666>] cpu_idle+0x8c/0xaf > > [<ffffffff8078174e>] start_kernel+0x2ac/0x2b8 > > [<ffffffff80781140>] _sinittext+0x140/0x144 > > > > > > So I tried running the latest snapshot 2.6.23-rc3 > > and the almost the same thing happens. Only > > difference is that now the entire box locks up. > > The error is almost the same > > > > eth1: hw csum failure. > > > > Call Trace: > > <IRQ> [<ffffffff804779b6>] > > __skb_checksum_complete_head+0x43/0x56 > > [<ffffffff804779d5>] __skb_checksum_complete+0xc/0x11 > > [<ffffffff804a989d>] tcp_v4_rcv+0x14e/0x801 > > [<ffffffff8048ff84>] ip_local_deliver+0xca/0x14c > > [<ffffffff80490472>] ip_rcv+0x46c/0x4ae > > [<ffffffff880060f9>] :sky2:sky2_poll+0x72b/0x9c7 > > [<ffffffff8047c934>] net_rx_action+0xa8/0x166 > > [<ffffffff80235ced>] __do_softirq+0x55/0xc4 > > [<ffffffff8020c5cc>] call_softirq+0x1c/0x28 > > [<ffffffff8020d6fd>] do_softirq+0x2c/0x7d > > [<ffffffff8020d9bb>] do_IRQ+0x13e/0x15f > > [<ffffffff8020a780>] mwait_idle+0x0/0x48 > > [<ffffffff8020b951>] ret_from_intr+0x0/0xa > > <EOI> [<ffffffff880063e7>] > > :sky2:sky2_xmit_frame+0x0/0x41d > > [<ffffffff8020a7c2>] mwait_idle+0x42/0x48 > > [<ffffffff8020a718>] cpu_idle+0xbd/0xe0 > > [<ffffffff80704a5a>] start_kernel+0x2ac/0x2b8 > > [<ffffffff80704140>] _sinittext+0x140/0x144 > > > > > > I see that the new kernel includes some sort of > > SKY2 DEBUG stuff. I would be happy to rerun > > the test with that turned on, given some minor > > direction. > > > > Regards, > Michal Please reproduce with a more recent kernel? ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: 2.6.23-rc3 and SKY2 driver issue 2007-08-16 13:05 ` Stephen Hemminger @ 2007-08-20 15:42 ` James Corey 2007-08-20 16:02 ` Stephen Hemminger 0 siblings, 1 reply; 6+ messages in thread From: James Corey @ 2007-08-20 15:42 UTC (permalink / raw) To: Stephen Hemminger, Michal Piotrowski; +Cc: linux-kernel, Netdev --- Stephen Hemminger <shemminger@linux-foundation.org> wrote: > On Thu, 16 Aug 2007 10:25:45 +0200 > "Michal Piotrowski" > <michal.k.k.piotrowski@gmail.com> wrote: > > > [Adding Stephen and netdev to CC] > > > > On 15/08/07, James Corey <ploversegg@yahoo.com> > wrote: > > > > > > I tried running a D-link gig card on kernel > 2.6.21.1 > > > and it came up fine, but when I did a sftp of > > > an linux dvd ISO to it, the interface would lock > > > up hard with the error > > > > > > eth1: hw csum failure. > > > > > > Call Trace: > > > <IRQ> [<ffffffff804d3e31>] > > > __skb_checksum_complete_head+0x46/0x5f > > > [<ffffffff804d3e56>] > __skb_checksum_complete+0xc/0x11 > > > [<ffffffff805046c7>] tcp_v4_rcv+0x157/0x810 > > > [<ffffffff804d8a6f>] dev_queue_xmit+0x237/0x260 > > > [<ffffffff80229990>] > find_busiest_group+0x252/0x684 > > > [<ffffffff804ead50>] > ip_local_deliver+0xca/0x14c > > > [<ffffffff804eb24a>] ip_rcv+0x478/0x4ba > > > [<ffffffff803ec7d3>] sky2_poll+0x6f9/0x9b9 > > > [<ffffffff8022bd5d>] > > > run_rebalance_domains+0x13e/0x408 > > > [<ffffffff804d877a>] net_rx_action+0xa8/0x166 > > > [<ffffffff80235d62>] __do_softirq+0x55/0xc3 > > > [<ffffffff8020a4ec>] call_softirq+0x1c/0x28 > > > [<ffffffff8020b611>] do_softirq+0x2c/0x7d > > > [<ffffffff8020b8cf>] do_IRQ+0x13e/0x15f > > > [<ffffffff802086ce>] mwait_idle+0x0/0x46 > > > [<ffffffff80209871>] ret_from_intr+0x0/0xa > > > <EOI> [<ffffffff80208710>] > mwait_idle+0x42/0x46 > > > [<ffffffff80208666>] cpu_idle+0x8c/0xaf > > > [<ffffffff8078174e>] start_kernel+0x2ac/0x2b8 > > > [<ffffffff80781140>] _sinittext+0x140/0x144 > > > > > > > > > So I tried running the latest snapshot > 2.6.23-rc3 > > > and the almost the same thing happens. Only > > > difference is that now the entire box locks up. > > > The error is almost the same > > > > > > eth1: hw csum failure. > > > > > > Call Trace: > > > <IRQ> [<ffffffff804779b6>] > > > __skb_checksum_complete_head+0x43/0x56 > > > [<ffffffff804779d5>] > __skb_checksum_complete+0xc/0x11 > > > [<ffffffff804a989d>] tcp_v4_rcv+0x14e/0x801 > > > [<ffffffff8048ff84>] > ip_local_deliver+0xca/0x14c > > > [<ffffffff80490472>] ip_rcv+0x46c/0x4ae > > > [<ffffffff880060f9>] > :sky2:sky2_poll+0x72b/0x9c7 > > > [<ffffffff8047c934>] net_rx_action+0xa8/0x166 > > > [<ffffffff80235ced>] __do_softirq+0x55/0xc4 > > > [<ffffffff8020c5cc>] call_softirq+0x1c/0x28 > > > [<ffffffff8020d6fd>] do_softirq+0x2c/0x7d > > > [<ffffffff8020d9bb>] do_IRQ+0x13e/0x15f > > > [<ffffffff8020a780>] mwait_idle+0x0/0x48 > > > [<ffffffff8020b951>] ret_from_intr+0x0/0xa > > > <EOI> [<ffffffff880063e7>] > > > :sky2:sky2_xmit_frame+0x0/0x41d > > > [<ffffffff8020a7c2>] mwait_idle+0x42/0x48 > > > [<ffffffff8020a718>] cpu_idle+0xbd/0xe0 > > > [<ffffffff80704a5a>] start_kernel+0x2ac/0x2b8 > > > [<ffffffff80704140>] _sinittext+0x140/0x144 > > > > > > > > > I see that the new kernel includes some sort of > > > SKY2 DEBUG stuff. I would be happy to rerun > > > the test with that turned on, given some minor > > > direction. > > > > > > > Regards, > > Michal > > Please reproduce with a more recent kernel? Um, I thought 2.6.23rc WAS pretty recent. :-) I'll check if there is something newer in the repository now. -J ____________________________________________________________________________________ Take the Internet to Go: Yahoo!Go puts the Internet in your pocket: mail, news, photos & more. http://mobile.yahoo.com/go?refer=1GNXIC ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: 2.6.23-rc3 and SKY2 driver issue 2007-08-20 15:42 ` James Corey @ 2007-08-20 16:02 ` Stephen Hemminger 2007-08-20 16:23 ` James Corey 0 siblings, 1 reply; 6+ messages in thread From: Stephen Hemminger @ 2007-08-20 16:02 UTC (permalink / raw) To: James Corey; +Cc: Michal Piotrowski, linux-kernel, Netdev On Mon, 20 Aug 2007 08:42:21 -0700 (PDT) James Corey <ploversegg@yahoo.com> wrote: > > --- Stephen Hemminger > <shemminger@linux-foundation.org> wrote: > > > On Thu, 16 Aug 2007 10:25:45 +0200 > > "Michal Piotrowski" > > > Please reproduce with a more recent kernel? > > Um, I thought 2.6.23rc WAS pretty recent. :-) > > I'll check if there is something newer in the > repository now. > What is the chip version? Please send console log: "dmesg | grep sky2" -- Stephen Hemminger <shemminger@linux-foundation.org> ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: 2.6.23-rc3 and SKY2 driver issue 2007-08-20 16:02 ` Stephen Hemminger @ 2007-08-20 16:23 ` James Corey 2007-08-20 16:47 ` Stephen Hemminger 0 siblings, 1 reply; 6+ messages in thread From: James Corey @ 2007-08-20 16:23 UTC (permalink / raw) To: Stephen Hemminger; +Cc: Michal Piotrowski, linux-kernel, Netdev --- Stephen Hemminger <shemminger@linux-foundation.org> wrote: > On Mon, 20 Aug 2007 08:42:21 -0700 (PDT) > James Corey <ploversegg@yahoo.com> wrote: > > > > > --- Stephen Hemminger > > <shemminger@linux-foundation.org> wrote: > > > > > On Thu, 16 Aug 2007 10:25:45 +0200 > > > "Michal Piotrowski" > > > > > Please reproduce with a more recent kernel? > > > > Um, I thought 2.6.23rc WAS pretty recent. :-) > > > > I'll check if there is something newer in the > > repository now. > > > > What is the chip version? Please send console log: > "dmesg | grep sky2" > > > -- > Stephen Hemminger <shemminger@linux-foundation.org> > Ah ... details. Machine: Dell Optiplex 745 Kernel: 2.6.23-rc3 #1 SMP Tue Aug 14 19:44:07 EDT 2007 x86_64 x86_64 x86_64 GNU/Linux Card: D-Link DGE-550SX # dmesg | grep sky2 sky2 0000:04:00.0: v1.16 addr 0xdf9fc000 irq 16 Yukon-XL (0xb3) rev 3 sky2 eth1: addr 00:17:9a:73:87:60 sky2 eth1: enabling interface sky2 eth1: ram buffer 96K sky2 eth1: Link is up at 1000 Mbps, full duplex, flow control none ____________________________________________________________________________________ Be a better Globetrotter. Get better travel answers from someone who knows. Yahoo! Answers - Check it out. http://answers.yahoo.com/dir/?link=list&sid=396545469 ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: 2.6.23-rc3 and SKY2 driver issue 2007-08-20 16:23 ` James Corey @ 2007-08-20 16:47 ` Stephen Hemminger 0 siblings, 0 replies; 6+ messages in thread From: Stephen Hemminger @ 2007-08-20 16:47 UTC (permalink / raw) To: James Corey; +Cc: Michal Piotrowski, linux-kernel, Netdev On Mon, 20 Aug 2007 09:23:46 -0700 (PDT) James Corey <ploversegg@yahoo.com> wrote: > > --- Stephen Hemminger > <shemminger@linux-foundation.org> wrote: > > > On Mon, 20 Aug 2007 08:42:21 -0700 (PDT) > > James Corey <ploversegg@yahoo.com> wrote: > > > > > > > > --- Stephen Hemminger > > > <shemminger@linux-foundation.org> wrote: > > > > > > > On Thu, 16 Aug 2007 10:25:45 +0200 > > > > "Michal Piotrowski" > > > > > > > Please reproduce with a more recent kernel? > > > > > > Um, I thought 2.6.23rc WAS pretty recent. :-) > > > > > > I'll check if there is something newer in the > > > repository now. > > > > > > > What is the chip version? Please send console log: > > "dmesg | grep sky2" > > > > > > -- > > Stephen Hemminger <shemminger@linux-foundation.org> > > > > > Ah ... details. > > Machine: > > Dell Optiplex 745 > > Kernel: > > 2.6.23-rc3 #1 SMP Tue Aug 14 19:44:07 EDT 2007 x86_64 > x86_64 x86_64 GNU/Linux > > Card: > > D-Link DGE-550SX > > # dmesg | grep sky2 > sky2 0000:04:00.0: v1.16 addr 0xdf9fc000 irq 16 > Yukon-XL (0xb3) rev 3 > sky2 eth1: addr 00:17:9a:73:87:60 > sky2 eth1: enabling interface > sky2 eth1: ram buffer 96K > sky2 eth1: Link is up at 1000 Mbps, full duplex, flow > control none Okay, this is a fiber based card. Does the error happen right away (ie all packets have bad sum), or is it sporadic (ie some magic packet or race in hardware). Also are you using regular (1500) or jumbo (9000) mtu? -- Stephen Hemminger <shemminger@linux-foundation.org> ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2007-08-20 16:48 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <663186.13204.qm@web90403.mail.mud.yahoo.com>
2007-08-16 8:25 ` 2.6.23-rc3 and SKY2 driver issue Michal Piotrowski
2007-08-16 13:05 ` Stephen Hemminger
2007-08-20 15:42 ` James Corey
2007-08-20 16:02 ` Stephen Hemminger
2007-08-20 16:23 ` James Corey
2007-08-20 16:47 ` Stephen Hemminger
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).