From: Marek Vasut <marex@denx.de>
To: George McCollister <george.mccollister@gmail.com>,
netdev@vger.kernel.org
Cc: Woojung Huh <woojung.huh@microchip.com>,
Andrew Lunn <andrew@lunn.ch>,
Florian Fainelli <f.fainelli@gmail.com>,
Tristram Ha <Tristram.Ha@microchip.com>,
"David S. Miller" <davem@davemloft.net>,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH net-next 2/3] net: dsa: microchip: add ksz9567 to ksz9477 driver
Date: Fri, 6 Sep 2019 23:41:23 +0200 [thread overview]
Message-ID: <6d8a915f-5f05-c91c-c139-26497376147d@denx.de> (raw)
In-Reply-To: <20190906213054.48908-3-george.mccollister@gmail.com>
On 9/6/19 11:30 PM, George McCollister wrote:
> Add support for the KSZ9567 7-Port Gigabit Ethernet Switch to the
> ksz9477 driver. The KSZ9567 supports both SPI and I2C. Oddly the
> ksz9567 is already in the device tree binding documentation.
>
> Signed-off-by: George McCollister <george.mccollister@gmail.com>
> ---
> drivers/net/dsa/microchip/ksz9477.c | 9 +++++++++
> drivers/net/dsa/microchip/ksz9477_i2c.c | 1 +
> drivers/net/dsa/microchip/ksz9477_spi.c | 1 +
> 3 files changed, 11 insertions(+)
>
> diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c
> index 187be42de5f1..50ffc63d6231 100644
> --- a/drivers/net/dsa/microchip/ksz9477.c
> +++ b/drivers/net/dsa/microchip/ksz9477.c
> @@ -1529,6 +1529,15 @@ static const struct ksz_chip_data ksz9477_switch_chips[] = {
> .cpu_ports = 0x07, /* can be configured as cpu port */
> .port_cnt = 3, /* total port count */
> },
> + {
> + .chip_id = 0x00956700,
> + .dev_name = "KSZ9567",
> + .num_vlans = 4096,
> + .num_alus = 4096,
> + .num_statics = 16,
> + .cpu_ports = 0x7F, /* can be configured as cpu port */
> + .port_cnt = 7, /* total physical port count */
I might be wrong, and this is just an idea for future improvement, but
is .cpu_ports = GEN_MASK(.port_cnt, 0) always ?
> + },
> };
>
> static int ksz9477_switch_init(struct ksz_device *dev)
> diff --git a/drivers/net/dsa/microchip/ksz9477_i2c.c b/drivers/net/dsa/microchip/ksz9477_i2c.c
> index 85fd0fb43941..c1548a43b60d 100644
> --- a/drivers/net/dsa/microchip/ksz9477_i2c.c
> +++ b/drivers/net/dsa/microchip/ksz9477_i2c.c
> @@ -77,6 +77,7 @@ MODULE_DEVICE_TABLE(i2c, ksz9477_i2c_id);
> static const struct of_device_id ksz9477_dt_ids[] = {
> { .compatible = "microchip,ksz9477" },
> { .compatible = "microchip,ksz9897" },
> + { .compatible = "microchip,ksz9567" },
> {},
> };
> MODULE_DEVICE_TABLE(of, ksz9477_dt_ids);
> diff --git a/drivers/net/dsa/microchip/ksz9477_spi.c b/drivers/net/dsa/microchip/ksz9477_spi.c
> index 2e402e4d866f..f4198d6f72be 100644
> --- a/drivers/net/dsa/microchip/ksz9477_spi.c
> +++ b/drivers/net/dsa/microchip/ksz9477_spi.c
> @@ -81,6 +81,7 @@ static const struct of_device_id ksz9477_dt_ids[] = {
> { .compatible = "microchip,ksz9893" },
> { .compatible = "microchip,ksz9563" },
> { .compatible = "microchip,ksz8563" },
> + { .compatible = "microchip,ksz9567" },
> {},
> };
> MODULE_DEVICE_TABLE(of, ksz9477_dt_ids);
>
Reviewed-by: Marek Vasut <marex@denx.de>
--
Best regards,
Marek Vasut
next prev parent reply other threads:[~2019-09-06 21:42 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-06 21:30 [PATCH net-next 0/3] add ksz9567 with I2C support to ksz9477 driver George McCollister
2019-09-06 21:30 ` [PATCH net-next 1/3] net: dsa: microchip: add KSZ9477 I2C driver George McCollister
2019-09-06 21:39 ` Marek Vasut
2019-09-09 12:54 ` George McCollister
2019-09-06 21:30 ` [PATCH net-next 2/3] net: dsa: microchip: add ksz9567 to ksz9477 driver George McCollister
2019-09-06 21:41 ` Marek Vasut [this message]
2019-09-09 13:33 ` George McCollister
2019-09-06 21:30 ` [PATCH net-next 3/3] net: dsa: microchip: remove NET_DSA_TAG_KSZ_COMMON George McCollister
2019-09-06 21:42 ` Marek Vasut
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=6d8a915f-5f05-c91c-c139-26497376147d@denx.de \
--to=marex@denx.de \
--cc=Tristram.Ha@microchip.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=george.mccollister@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=woojung.huh@microchip.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox