From: Sean Neakums <sneakums@zork.net>
To: Francois Romieu <romieu@fr.zoreil.com>
Cc: jgarzik@pobox.com, akpm@osdl.org, netdev@oss.sgi.com,
linux-kernel@vger.kernel.org
Subject: Re: 2.6.9-rc1-mm4: r8169: irq 16: nobody cared!/TX Timeout
Date: Sun, 12 Sep 2004 19:14:28 +0100 [thread overview]
Message-ID: <6u8ybf2w3f.fsf@zork.zork.net> (raw)
In-Reply-To: <20040912110614.GA20942@electric-eye.fr.zoreil.com> (Francois Romieu's message of "Sun, 12 Sep 2004 13:06:15 +0200")
Francois Romieu <romieu@fr.zoreil.com> writes:
> Sean Neakums <sneakums@zork.net> :
> [r8169 irq delivery/Tx timeout issue]
>> I downed and upped the interface and it started working again.
>
> There is a gross error in the 2.6.9-rc1-mm4 version of the r8169 driver
> which could be related to your bug.
>
> A few patches have been posted on netdev amongst which the first should
> make things better (see [PATCH 2.6.9-rc1-mm4 x/4] on netdev the 10 of
> september 2004)
>
> Can you apply the patch below on top of 2.6.9-rc1-mm4 and report
> if it makes things better:
> http://www.fr.zoreil.com/linux/kernel/2.6.x/2.6.9-rc1-mm4/r8169/r8169-130.patch
Running 2.6.9-rc1-mm4 with the above patch.
I'm a bit unsure of the timing, but at some point I got this either
before or during the transfer I set up to get some Tx activity, a
repeated wget of a 35M file.
irq 10: nobody cared!
[__report_bad_irq+36/144] __report_bad_irq+0x24/0x90
[note_interrupt+146/352] note_interrupt+0x92/0x160
[do_IRQ+354/416] do_IRQ+0x162/0x1a0
[common_interrupt+24/32] common_interrupt+0x18/0x20
[default_idle+0/64] default_idle+0x0/0x40
[default_idle+44/64] default_idle+0x2c/0x40
[cpu_idle+52/80] cpu_idle+0x34/0x50
[start_kernel+347/384] start_kernel+0x15b/0x180
[unknown_bootoption+0/368] unknown_bootoption+0x0/0x170
handlers:
[usb_hcd_irq+0/112] (usb_hcd_irq+0x0/0x70)
[usb_hcd_irq+0/112] (usb_hcd_irq+0x0/0x70)
Disabling IRQ #10
I killed the transfer and started X, getting this immediately:
irq 16: nobody cared!
[__report_bad_irq+36/144] __report_bad_irq+0x24/0x90
[note_interrupt+146/352] note_interrupt+0x92/0x160
[do_IRQ+354/416] do_IRQ+0x162/0x1a0
[common_interrupt+24/32] common_interrupt+0x18/0x20
[default_idle+0/64] default_idle+0x0/0x40
[default_idle+44/64] default_idle+0x2c/0x40
[cpu_idle+52/80] cpu_idle+0x34/0x50
handlers:
[rtl8169_interrupt+0/464] (rtl8169_interrupt+0x0/0x1d0)
Disabling IRQ #16
This also happened during the originally-reported incident, which I
forgot to mention. Both times, downing and then upping the interface
resulted in what seemed like a solid hang, although possibly it was
just X.
I rebooted and started X again, and again got the above. If I boot
with acpi=noirq, I don't get that message upon starting X. Here's
/proc/interrupts before and after starting X, without passing
acpi=noirq:
CPU0 CPU1
0: 18810 52561 IO-APIC-edge timer
1: 142 8 IO-APIC-edge i8042
5: 0 0 IO-APIC-level acpi
8: 2 2 IO-APIC-edge rtc
10: 3651 3367 IO-APIC-level uhci_hcd, uhci_hcd
11: 0 0 IO-APIC-level VIA686A
14: 2 13 IO-APIC-edge ide0
16: 10 8 IO-APIC-level eth2
17: 12 7 IO-APIC-level eth1
19: 2989 2564 IO-APIC-level aic7xxx
NMI: 0 0
LOC: 71037 71036
ERR: 0
MIS: 0
CPU0 CPU1
0: 42718 64701 IO-APIC-edge timer
1: 247 33 IO-APIC-edge i8042
5: 0 0 IO-APIC-level acpi
8: 2 2 IO-APIC-edge rtc
10: 4928 3367 IO-APIC-level uhci_hcd, uhci_hcd
11: 0 0 IO-APIC-level VIA686A, radeon@PCI:1:0:0
14: 2 13 IO-APIC-edge ide0
16: 10 99990 IO-APIC-level eth2
17: 30 7 IO-APIC-level eth1
19: 3927 2564 IO-APIC-level aic7xxx
NMI: 0 0
LOC: 107084 107083
ERR: 0
MIS: 0
I don't know if this is significant, but with acpi=noirq,
/proc/interrupts looks like this:
CPU0 CPU1
0: 196902 25653 IO-APIC-edge timer
1: 64 1189 IO-APIC-edge i8042
2: 0 0 XT-PIC cascade
5: 0 0 IO-APIC-edge acpi
8: 2 2 IO-APIC-edge rtc
9: 93 4 IO-APIC-level eth1
10: 2438 4609 IO-APIC-level aic7xxx, uhci_hcd, uhci_hcd
11: 10 15775 IO-APIC-level eth2, radeon@PCI:1:0:0
12: 0 0 IO-APIC-level VIA686A
14: 10 5 IO-APIC-edge ide0
NMI: 0 0
LOC: 222226 222225
ERR: 0
MIS: 0
eth2 being the 8169.
Unfortunately after tonight I won't have access to this machine until
Friday evening. I'll grab the netdev patchset and try those next.
next prev parent reply other threads:[~2004-09-12 18:14 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-09-11 23:16 2.6.9-rc1-mm4: r8169: irq 16: nobody cared!/TX Timeout Sean Neakums
2004-09-12 11:06 ` Francois Romieu
2004-09-12 18:14 ` Sean Neakums [this message]
2004-09-12 20:43 ` Francois Romieu
2004-09-12 21:05 ` Sean Neakums
2004-09-12 21:59 ` Francois Romieu
2004-09-13 11:38 ` Alan Cox
2004-09-13 12:48 ` Sean Neakums
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=6u8ybf2w3f.fsf@zork.zork.net \
--to=sneakums@zork.net \
--cc=akpm@osdl.org \
--cc=jgarzik@pobox.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@oss.sgi.com \
--cc=romieu@fr.zoreil.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).