From: Sergey Shtylyov <s.shtylyov@omp.ru>
To: Biju Das <biju.das.jz@bp.renesas.com>,
"David S. Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>
Cc: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>,
Andrew Lunn <andrew@lunn.ch>,
Sergei Shtylyov <sergei.shtylyov@gmail.com>,
"Geert Uytterhoeven" <geert+renesas@glider.be>,
Adam Ford <aford173@gmail.com>,
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>,
<netdev@vger.kernel.org>, <linux-renesas-soc@vger.kernel.org>,
Chris Paterson <Chris.Paterson2@renesas.com>,
Biju Das <biju.das@bp.renesas.com>
Subject: Re: [PATCH net-next 04/13] ravb: Add ptp_cfg_active to struct ravb_hw_info
Date: Wed, 25 Aug 2021 23:38:30 +0300 [thread overview]
Message-ID: <777c30b1-e94e-e241-b10c-ecd4d557bc06@omp.ru> (raw)
In-Reply-To: <20210825070154.14336-5-biju.das.jz@bp.renesas.com>
On 8/25/21 10:01 AM, Biju Das wrote:
> There are some H/W differences for the gPTP feature between
> R-Car Gen3, R-Car Gen2, and RZ/G2L as below.
>
> 1) On R-Car Gen3, gPTP support is active in config mode.
> 2) On R-Car Gen2, gPTP support is not active in config mode.
> 3) RZ/G2L does not support the gPTP feature.
>
> Add a ptp_cfg_active hw feature bit to struct ravb_hw_info for
> supporting gPTP active in config mode for R-Car Gen3.
Wait, we've just done this ion the previous patch!
> This patch also removes enum ravb_chip_id, chip_id from both
> struct ravb_hw_info and struct ravb_private, as it is unused.
>
> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> ---
> drivers/net/ethernet/renesas/ravb.h | 8 +-------
> drivers/net/ethernet/renesas/ravb_main.c | 12 +++++-------
> 2 files changed, 6 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/net/ethernet/renesas/ravb.h b/drivers/net/ethernet/renesas/ravb.h
> index 9ecf1a8c3ca8..209e030935aa 100644
> --- a/drivers/net/ethernet/renesas/ravb.h
> +++ b/drivers/net/ethernet/renesas/ravb.h
> @@ -979,17 +979,11 @@ struct ravb_ptp {
> struct ravb_ptp_perout perout[N_PER_OUT];
> };
>
> -enum ravb_chip_id {
> - RCAR_GEN2,
> - RCAR_GEN3,
> -};
> -
> struct ravb_hw_info {
> const char (*gstrings_stats)[ETH_GSTRING_LEN];
> size_t gstrings_size;
> netdev_features_t net_hw_features;
> netdev_features_t net_features;
> - enum ravb_chip_id chip_id;
> int stats_len;
> size_t max_rx_len;
I would put the above in a spearte patch...
> unsigned aligned_tx: 1;
> @@ -999,6 +993,7 @@ struct ravb_hw_info {
> unsigned tx_counters:1; /* E-MAC has TX counters */
> unsigned multi_irqs:1; /* AVB-DMAC and E-MAC has multiple irqs */
> unsigned no_ptp_cfg_active:1; /* AVB-DMAC does not support gPTP active in config mode */
> + unsigned ptp_cfg_active:1; /* AVB-DMAC has gPTP support active in config mode */
Huh?
> };
>
> struct ravb_private {
[...]
> @@ -2216,7 +2213,7 @@ static int ravb_probe(struct platform_device *pdev)
> INIT_LIST_HEAD(&priv->ts_skb_list);
>
> /* Initialise PTP Clock driver */
> - if (info->chip_id != RCAR_GEN2)
> + if (info->ptp_cfg_active)
> ravb_ptp_init(ndev, pdev);
What's that? Didn't you touch this lie in patch #3?
This seems lie a NAK bait... :-(
MBR, Sergey
next prev parent reply other threads:[~2021-08-25 20:38 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-25 7:01 [PATCH net-next 00/13] Add Factorisation code to support Gigabit Ethernet driver Biju Das
2021-08-25 7:01 ` [PATCH net-next 01/13] ravb: Remove the macros NUM_TX_DESC_GEN[23] Biju Das
2021-08-25 14:30 ` Sergey Shtylyov
2021-08-25 7:01 ` [PATCH net-next 02/13] ravb: Add multi_irq to struct ravb_hw_info Biju Das
2021-08-25 18:49 ` Sergey Shtylyov
2021-08-25 19:10 ` Sergey Shtylyov
2021-08-25 7:01 ` [PATCH net-next 03/13] ravb: Add no_ptp_cfg_active " Biju Das
2021-08-25 20:17 ` Sergey Shtylyov
2021-08-25 7:01 ` [PATCH net-next 04/13] ravb: Add ptp_cfg_active " Biju Das
2021-08-25 20:38 ` Sergey Shtylyov [this message]
2021-08-26 6:20 ` Biju Das
2021-08-26 10:29 ` Sergey Shtylyov
2021-08-26 10:34 ` Biju Das
2021-08-26 10:42 ` Sergey Shtylyov
2021-08-26 10:52 ` Biju Das
2021-08-26 18:06 ` Sergei Shtylyov
2021-08-26 18:57 ` Andrew Lunn
2021-08-26 19:02 ` Sergey Shtylyov
2021-08-26 19:09 ` Andrew Lunn
2021-08-26 19:37 ` Biju Das
2021-08-26 20:03 ` Sergey Shtylyov
2021-08-27 6:36 ` Biju Das
2021-08-27 15:48 ` Sergey Shtylyov
2021-08-27 15:55 ` Biju Das
2021-08-25 7:01 ` [PATCH net-next 05/13] ravb: Factorise ravb_ring_free function Biju Das
2021-08-25 20:53 ` Sergey Shtylyov
2021-08-25 7:01 ` [PATCH net-next 06/13] ravb: Factorise ravb_ring_format function Biju Das
2021-08-26 18:54 ` Sergey Shtylyov
2021-08-26 19:34 ` Biju Das
2021-08-25 7:01 ` [PATCH net-next 07/13] ravb: Factorise ravb_ring_init function Biju Das
2021-08-26 20:27 ` Sergey Shtylyov
2021-08-25 7:01 ` [PATCH net-next 08/13] ravb: Factorise ravb_rx function Biju Das
2021-08-26 20:41 ` Sergey Shtylyov
2021-08-27 6:28 ` Biju Das
2021-08-25 7:01 ` [PATCH net-next 09/13] ravb: Factorise ravb_adjust_link function Biju Das
2021-08-25 7:01 ` [PATCH net-next 10/13] ravb: Factorise ravb_set_features Biju Das
2021-08-27 19:16 ` Sergey Shtylyov
2021-08-28 9:20 ` Biju Das
2021-08-28 11:35 ` Sergey Shtylyov
2021-08-28 12:45 ` Biju Das
2021-08-25 7:01 ` [PATCH net-next 11/13] ravb: Factorise ravb_dmac_init function Biju Das
2021-08-27 19:36 ` Sergey Shtylyov
2021-08-28 9:28 ` Biju Das
2021-08-25 7:01 ` [PATCH net-next 12/13] ravb: Factorise ravb_emac_init function Biju Das
2021-08-27 19:52 ` Sergey Shtylyov
2021-08-28 9:34 ` Biju Das
2021-08-25 7:01 ` [PATCH net-next 13/13] ravb: Add reset support Biju Das
2021-08-27 20:17 ` Sergey Shtylyov
2021-08-28 9:41 ` Biju Das
2021-08-25 10:30 ` [PATCH net-next 00/13] Add Factorisation code to support Gigabit Ethernet driver patchwork-bot+netdevbpf
2021-08-25 10:57 ` Sergey Shtylyov
2021-08-25 13:46 ` Andrew Lunn
2021-08-25 14:06 ` Sergey Shtylyov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=777c30b1-e94e-e241-b10c-ecd4d557bc06@omp.ru \
--to=s.shtylyov@omp.ru \
--cc=Chris.Paterson2@renesas.com \
--cc=aford173@gmail.com \
--cc=andrew@lunn.ch \
--cc=biju.das.jz@bp.renesas.com \
--cc=biju.das@bp.renesas.com \
--cc=davem@davemloft.net \
--cc=geert+renesas@glider.be \
--cc=kuba@kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=sergei.shtylyov@gmail.com \
--cc=yoshihiro.shimoda.uh@renesas.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).