From: Heiner Kallweit <hkallweit1@gmail.com>
To: Antonio Borneo <antonio.borneo@st.com>,
Andrew Lunn <andrew@lunn.ch>,
Russell King <linux@armlinux.org.uk>,
"David S. Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>,
netdev@vger.kernel.org, Yonglong Liu <liuyonglong@huawei.com>,
Willy Liu <willy.liu@realtek.com>
Cc: linuxarm@huawei.com, Salil Mehta <salil.mehta@huawei.com>,
linux-stm32@st-md-mailman.stormreply.com,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2] net: phy: realtek: read actual speed on rtl8211f to detect downshift
Date: Tue, 24 Nov 2020 23:22:03 +0100 [thread overview]
Message-ID: <7d8bf728-7d73-fa8c-d63d-49e9e6c872fd@gmail.com> (raw)
In-Reply-To: <20201124215932.885306-1-antonio.borneo@st.com>
Am 24.11.2020 um 22:59 schrieb Antonio Borneo:
> The rtl8211f supports downshift and before commit 5502b218e001
> ("net: phy: use phy_resolve_aneg_linkmode in genphy_read_status")
> the read-back of register MII_CTRL1000 was used to detect the
> negotiated link speed.
> The code added in commit d445dff2df60 ("net: phy: realtek: read
> actual speed to detect downshift") is working fine also for this
> phy and it's trivial re-using it to restore the downshift
> detection on rtl8211f.
>
> Add the phy specific read_status() pointing to the existing
> function rtlgen_read_status().
>
> Signed-off-by: Antonio Borneo <antonio.borneo@st.com>
> Link: https://lore.kernel.org/r/478f871a-583d-01f1-9cc5-2eea56d8c2a7@huawei.com
> ---
> To: Andrew Lunn <andrew@lunn.ch>
> To: Heiner Kallweit <hkallweit1@gmail.com>
> To: Russell King <linux@armlinux.org.uk>
> To: "David S. Miller" <davem@davemloft.net>
> To: Jakub Kicinski <kuba@kernel.org>
> To: netdev@vger.kernel.org
> To: Yonglong Liu <liuyonglong@huawei.com>
> To: Willy Liu <willy.liu@realtek.com>
> Cc: linuxarm@huawei.com
> Cc: Salil Mehta <salil.mehta@huawei.com>
> Cc: linux-stm32@st-md-mailman.stormreply.com
> Cc: linux-kernel@vger.kernel.org
> In-Reply-To: <20201124143848.874894-1-antonio.borneo@st.com>
>
> V1 => V2
> move from a generic implementation affecting every phy
> to a rtl8211f specific implementation
> ---
> drivers/net/phy/realtek.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
> index 575580d3ffe0..8ff8a4edc173 100644
> --- a/drivers/net/phy/realtek.c
> +++ b/drivers/net/phy/realtek.c
> @@ -621,6 +621,7 @@ static struct phy_driver realtek_drvs[] = {
> PHY_ID_MATCH_EXACT(0x001cc916),
> .name = "RTL8211F Gigabit Ethernet",
> .config_init = &rtl8211f_config_init,
> + .read_status = rtlgen_read_status,
> .ack_interrupt = &rtl8211f_ack_interrupt,
> .config_intr = &rtl8211f_config_intr,
> .suspend = genphy_suspend,
>
> base-commit: 9bd2702d292cb7b565b09e949d30288ab7a26d51
>
Pefect would be to make this a fix for 5502b218e001,
but rtlgen_read_status() was added one year after this change.
Marking the change that added rtlgen_read_status() as "Fixes"
would be technically ok, but as it's not actually broken not
everybody may be happy with this.
Having said that I'd be fine with treating this as an improvement,
downshift should be a rare case.
next prev parent reply other threads:[~2020-11-24 22:23 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-24 14:38 [PATCH] net: phy: fix auto-negotiation in case of 'down-shift' Antonio Borneo
2020-11-24 14:56 ` Russell King - ARM Linux admin
2020-11-24 15:17 ` Antonio Borneo
2020-11-24 15:26 ` Heiner Kallweit
2020-11-24 15:37 ` Russell King - ARM Linux admin
2020-11-24 17:00 ` Antonio Borneo
2020-11-24 15:03 ` Heiner Kallweit
2020-11-24 15:17 ` Russell King - ARM Linux admin
2020-11-24 15:31 ` Antonio Borneo
2020-11-24 15:46 ` David Laight
2020-11-24 21:59 ` [PATCH v2] net: phy: realtek: read actual speed on rtl8211f to detect downshift Antonio Borneo
2020-11-24 22:22 ` Heiner Kallweit [this message]
2020-11-24 22:33 ` Antonio Borneo
2020-11-24 22:41 ` Heiner Kallweit
2020-11-24 23:07 ` [PATCH v3 net-next] " Antonio Borneo
2020-11-25 15:03 ` Yonglong Liu
2020-11-25 16:57 ` Yonglong Liu
2020-11-25 17:07 ` Russell King - ARM Linux admin
2020-11-26 1:15 ` Yonglong Liu
2020-11-25 20:30 ` Jakub Kicinski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7d8bf728-7d73-fa8c-d63d-49e9e6c872fd@gmail.com \
--to=hkallweit1@gmail.com \
--cc=andrew@lunn.ch \
--cc=antonio.borneo@st.com \
--cc=davem@davemloft.net \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=linux@armlinux.org.uk \
--cc=linuxarm@huawei.com \
--cc=liuyonglong@huawei.com \
--cc=netdev@vger.kernel.org \
--cc=salil.mehta@huawei.com \
--cc=willy.liu@realtek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).