From mboxrd@z Thu Jan 1 00:00:00 1970 From: Kishon Vijay Abraham I Subject: Re: [PATCH v2 3/5] phy: ocelot-serdes: convert to use eth phy mode and submode Date: Mon, 12 Nov 2018 16:12:38 +0530 Message-ID: <7fbbaae0-6c6d-a813-109c-15c45e20555e@ti.com> References: <20181109234755.21687-1-grygorii.strashko@ti.com> <20181109234755.21687-4-grygorii.strashko@ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit Cc: , Sekhar Nori , , , Tony Lindgren , , , Alexandre Belloni , Antoine Tenart , Vivek Gautam , Maxime Ripard , Chen-Yu Tsai , Carlo Caione , Chunfeng Yun , Matthias Brugger , Manu Gautam , "Gustavo A. R. Silva" To: Grygorii Strashko , "David S. Miller" , Russell King - ARM Linux , Quentin Schulz Return-path: In-Reply-To: <20181109234755.21687-4-grygorii.strashko@ti.com> Content-Language: en-US Sender: linux-kernel-owner@vger.kernel.org List-Id: netdev.vger.kernel.org Hi Quentin, David Miller Need your ACK on this patch. Thanks Kishon On 10/11/18 5:17 AM, Grygorii Strashko wrote: > Convert ocelot-serdes PHY driver to use recently introduced > PHY_MODE_ETHERNET and phy_set_mode_ext(). > > Signed-off-by: Grygorii Strashko > --- > drivers/net/ethernet/mscc/ocelot.c | 9 ++------- > drivers/phy/mscc/phy-ocelot-serdes.c | 14 ++++++++++---- > 2 files changed, 12 insertions(+), 11 deletions(-) > > diff --git a/drivers/net/ethernet/mscc/ocelot.c b/drivers/net/ethernet/mscc/ocelot.c > index 3238b9e..3edb608 100644 > --- a/drivers/net/ethernet/mscc/ocelot.c > +++ b/drivers/net/ethernet/mscc/ocelot.c > @@ -472,7 +472,6 @@ static int ocelot_port_open(struct net_device *dev) > { > struct ocelot_port *port = netdev_priv(dev); > struct ocelot *ocelot = port->ocelot; > - enum phy_mode phy_mode; > int err; > > /* Enable receiving frames on the port, and activate auto-learning of > @@ -484,12 +483,8 @@ static int ocelot_port_open(struct net_device *dev) > ANA_PORT_PORT_CFG, port->chip_port); > > if (port->serdes) { > - if (port->phy_mode == PHY_INTERFACE_MODE_SGMII) > - phy_mode = PHY_MODE_SGMII; > - else > - phy_mode = PHY_MODE_QSGMII; > - > - err = phy_set_mode(port->serdes, phy_mode); > + err = phy_set_mode_ext(port->serdes, PHY_MODE_ETHERNET, > + port->phy_mode); > if (err) { > netdev_err(dev, "Could not set mode of SerDes\n"); > return err; > diff --git a/drivers/phy/mscc/phy-ocelot-serdes.c b/drivers/phy/mscc/phy-ocelot-serdes.c > index c61a9890..f525a21 100644 > --- a/drivers/phy/mscc/phy-ocelot-serdes.c > +++ b/drivers/phy/mscc/phy-ocelot-serdes.c > @@ -11,6 +11,7 @@ > #include > #include > #include > +#include > #include > #include > #include > @@ -116,8 +117,10 @@ struct serdes_mux { > .mux = _mux, \ > } > > -#define SERDES_MUX_SGMII(i, p, m, c) SERDES_MUX(i, p, PHY_MODE_SGMII, m, c) > -#define SERDES_MUX_QSGMII(i, p, m, c) SERDES_MUX(i, p, PHY_MODE_QSGMII, m, c) > +#define SERDES_MUX_SGMII(i, p, m, c) \ > + SERDES_MUX(i, p, PHY_INTERFACE_MODE_SGMII, m, c) > +#define SERDES_MUX_QSGMII(i, p, m, c) \ > + SERDES_MUX(i, p, PHY_INTERFACE_MODE_QSGMII, m, c) > > static const struct serdes_mux ocelot_serdes_muxes[] = { > SERDES_MUX_SGMII(SERDES1G(0), 0, 0, 0), > @@ -164,12 +167,15 @@ static int serdes_set_mode(struct phy *phy, enum phy_mode mode, int submode) > unsigned int i; > int ret; > > + if (mode != PHY_MODE_ETHERNET) > + return -EINVAL; > + > for (i = 0; i < ARRAY_SIZE(ocelot_serdes_muxes); i++) { > if (macro->idx != ocelot_serdes_muxes[i].idx || > - mode != ocelot_serdes_muxes[i].mode) > + submode != ocelot_serdes_muxes[i].mode) > continue; > > - if (mode != PHY_MODE_QSGMII && > + if (submode != PHY_INTERFACE_MODE_QSGMII && > macro->port != ocelot_serdes_muxes[i].port) > continue; > >