From mboxrd@z Thu Jan 1 00:00:00 1970 From: Kevin Hilman Subject: Re: [PATCH] ARM64: dts: meson-axg: add ethernet mac controller Date: Wed, 06 Dec 2017 12:07:13 -0800 Message-ID: <7hy3mfr572.fsf@baylibre.com> References: <20171113080155.2463-1-yixun.lan@amlogic.com> Mime-Version: 1.0 Content-Type: text/plain Cc: , Neil Armstrong , Jerome Brunet , Giuseppe Cavallaro , Alexandre Torgue , Carlo Caione , , , , To: Yixun Lan Return-path: In-Reply-To: <20171113080155.2463-1-yixun.lan@amlogic.com> (Yixun Lan's message of "Mon, 13 Nov 2017 16:01:55 +0800") Sender: linux-kernel-owner@vger.kernel.org List-Id: netdev.vger.kernel.org Yixun Lan writes: > Add DT info for the stmmac ethernet MAC which found in > the Amlogic's Meson-AXG SoC, also describe the ethernet > pinctrl & clock information here. > > This is tested in the S400 dev board which use a RTL8211F PHY, > and the pins connect to the 'eth_rgmii_y_pins' group. > > Signed-off-by: Yixun Lan This doesn't apply cleanly to mainline. Are there some dependencies here that I'm not aware of? Also... > --- > arch/arm64/boot/dts/amlogic/meson-axg-s400.dts | 7 ++++ > arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 53 ++++++++++++++++++++++++++ > 2 files changed, 60 insertions(+) > > diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts > index 9eb6aaee155d..7b39a9fe2b0f 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts > +++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts > @@ -21,3 +21,10 @@ > status = "okay"; > }; > > +ðmac { > + status = "okay"; > + phy-mode = "rgmii"; > + > + pinctrl-0 = <ð_rgmii_y_pins>; > + pinctrl-names = "default"; > +}; > diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi > index 65945c6c8b65..57faaa9d8013 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi > +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi > @@ -157,6 +157,19 @@ > #address-cells = <0>; > }; > > + ethmac: ethernet@ff3f0000 { > + compatible = "amlogic,meson-axg-dwmac", "amlogic,meson-gxbb-dwmac", "snps,dwmac"; The new "meson-axg-dwmac" is not documented in the binding. Can you add that? Kevin