[PATCH v2 net-next 3/3] tuntap: Increase the number of queues in tun.

[PATCH v2 net-next 3/3] tuntap: Increase the number of queues in tun.

[Pankaj Gupta]

Networking under kvm works best if we allocate a per-vCPU RX and TX
queue in a virtual NIC. This requires a per-vCPU queue on the host side.

It is now safe to increase the maximum number of queues.
Preceding patches:
        net: allow large number of rx queues
        tuntap: Reduce the size of tun_struct by using flex array

        made sure this won't cause failures due to high order memory
allocations. Increase it to 256: this is the max number of vCPUs
KVM supports.

Signed-off-by: Pankaj Gupta <pagupta@redhat.com>
Reviewed-by: David Gibson <dgibson@redhat.com>
---
 drivers/net/tun.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/net/tun.c b/drivers/net/tun.c
index e3fa65a..a19dc5f8 100644
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -113,10 +113,11 @@ struct tap_filter {
 	unsigned char	addr[FLT_EXACT_COUNT][ETH_ALEN];
 };
 
-/* DEFAULT_MAX_NUM_RSS_QUEUES were chosen to let the rx/tx queues allocated for
- * the netdevice to be fit in one page. So we can make sure the success of
- * memory allocation. TODO: increase the limit. */
-#define MAX_TAP_QUEUES DEFAULT_MAX_NUM_RSS_QUEUES
+/* MAX_TAP_QUEUES 256 is chosen to allow rx/tx queues to be equal
+ * to max number of vCPUS in guest. Also, we are making sure here
+ * queue memory allocation do not fail.
+ */
+#define MAX_TAP_QUEUES 256
 #define MAX_TAP_FLOWS  4096
 
 #define TUN_FLOW_EXPIRE (3 * HZ)
-- 
1.8.3.1

Re: [PATCH v2 net-next 3/3] tuntap: Increase the number of queues in tun.

[Pankaj Gupta]

Adding Michael to CC.

> 
> Networking under kvm works best if we allocate a per-vCPU RX and TX
> queue in a virtual NIC. This requires a per-vCPU queue on the host side.
> 
> It is now safe to increase the maximum number of queues.
> Preceding patches:
>         net: allow large number of rx queues
>         tuntap: Reduce the size of tun_struct by using flex array
> 
>         made sure this won't cause failures due to high order memory
> allocations. Increase it to 256: this is the max number of vCPUs
> KVM supports.
> 
> Signed-off-by: Pankaj Gupta <pagupta@redhat.com>
> Reviewed-by: David Gibson <dgibson@redhat.com>
> ---
>  drivers/net/tun.c | 9 +++++----
>  1 file changed, 5 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/net/tun.c b/drivers/net/tun.c
> index e3fa65a..a19dc5f8 100644
> --- a/drivers/net/tun.c
> +++ b/drivers/net/tun.c
> @@ -113,10 +113,11 @@ struct tap_filter {
>  	unsigned char	addr[FLT_EXACT_COUNT][ETH_ALEN];
>  };
>  
> -/* DEFAULT_MAX_NUM_RSS_QUEUES were chosen to let the rx/tx queues allocated
> for
> - * the netdevice to be fit in one page. So we can make sure the success of
> - * memory allocation. TODO: increase the limit. */
> -#define MAX_TAP_QUEUES DEFAULT_MAX_NUM_RSS_QUEUES
> +/* MAX_TAP_QUEUES 256 is chosen to allow rx/tx queues to be equal
> + * to max number of vCPUS in guest. Also, we are making sure here
> + * queue memory allocation do not fail.
> + */
> +#define MAX_TAP_QUEUES 256
>  #define MAX_TAP_FLOWS  4096
>  
>  #define TUN_FLOW_EXPIRE (3 * HZ)
> --
> 1.8.3.1
> 
>