Re: MT7530 bug, forward broadcast and unknown frames to the correct CPU port

["Arınç ÜNAL" <arinc.unal@arinc9.com>]

On 1.05.2023 13:31, Daniel Golle wrote:
> On Mon, May 01, 2023 at 01:09:30PM +0300, Vladimir Oltean wrote:
>> On Sat, Apr 29, 2023 at 10:52:12PM +0300, Arınç ÜNAL wrote:
>>> On 29.04.2023 21:56, Vladimir Oltean wrote:
>>>> On Sat, Apr 29, 2023 at 09:39:41PM +0300, Arınç ÜNAL wrote:
>>>>> Are you fine with the preferred port patch now that I mentioned port 6
>>>>> would be preferred for MT7531BE since it's got 2.5G whilst port 5 has
>>>>> got 1G? Would you like to submit it or leave it to me to send the diff
>>>>> above and this?
>>>>
>>>> No, please tell me: what real life difference would it make to a user
>>>> who doesn't care to analyze which CPU port is used?
>>>
>>> They would get 2.5 Gbps download/upload bandwidth in total to the CPU,
>>> instead of 1 Gbps. 3 computers connected to 3 switch ports would each get
>>> 833 Mbps download/upload speed to/from the CPU instead of 333 Mbps.
>>
>> In theory, theory and practice are the same. In practice, they aren't.
>> Are you able to obtain 833 Mbps concurrently over 3 user ports?
> 
> Probably the 2.5 GBit/s won't saturate, but I do manage to get more
> than 1 Gbit/s total (using the hardware flow offloading capability to
> NAT-route WAN<->LAN and simultanously have a WiFi client access a NAS
> device which also connects to a LAN port. I use MT7915E+MT7975D mPCIe
> module with BPi-R2)
> 
> Using PHY muxing to directly map the WAN port to GMAC2 is also an
> option, but would be limiting the bandwidth for those users who just
> want all 5 ports to be bridged. Hence I do agree with Arınç that the
> best would be to use the TRGMII link on GMAC1 for the 4 WAN ports and
> prefer using RGMII link on GMAC2 for the WAN port, but keep using DSA.

You seem to be rather talking about MT7530 while I think preferring port 6
would benefit MT7531BE the most.

Can you test the actual speed with SGMII on MT7531? Route between two ports and
do a bidirectional iperf3 speed test.

SGMII should at least provide you with 2 Gbps bandwidth in total in a
router-on-a-stick scenario which is the current situation until the changing
DSA conduit support is added.

If we were to use port 5, download and upload speed would be capped at 500
Mbps. With SGMII you should get 1000 Mbps on each.

Arınç