From mboxrd@z Thu Jan  1 00:00:00 1970
From: Yoshinori Sato <ysato@users.sourceforge.jp>
Subject: Re: [PATCH] sh_eth Add SH7619 support
Date: Fri, 01 Aug 2008 11:32:28 -0400
Message-ID: <871w18ycmr.wl%ysato@users.sourceforge.jp>
References: <878wvhtynu.wl%ysato@users.sourceforge.jp>
	<29ab51dc0807312048hfa9cd88pb90d1a7520bb3f99@mail.gmail.com>
Mime-Version: 1.0 (generated by SEMI 1.14.6 - "Maruoka")
Content-Type: text/plain; charset=US-ASCII
Cc: "Jeff Garzik" <jeff@garzik.org>,
	"Nobuhiro Iwamatsu" <iwamatsu.nobuhiro@renesas.com>,
	netdev@vger.kernel.org, linux-sh@vger.kernel.org
To: "Nobuhiro Iwamatsu" <iwamatsu@nigauri.org>
Return-path: <linux-sh-owner@vger.kernel.org>
In-Reply-To: <29ab51dc0807312048hfa9cd88pb90d1a7520bb3f99@mail.gmail.com>
Sender: linux-sh-owner@vger.kernel.org
List-Id: netdev.vger.kernel.org

At Fri, 1 Aug 2008 12:48:27 +0900,
Nobuhiro Iwamatsu wrote:
> 
> Hi, Sato-san.
> 
> 2008/8/1 Yoshinori Sato <ysato@users.sourceforge.jp>:
> > SH7619 have same SH7710 ethernet controler.
> > Add support for sh_eth driver.
> >
> > Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
> >
> 
> <snip>
> 
> >
> > diff --git a/drivers/net/sh_eth.h b/drivers/net/sh_eth.h
> > index 45ad1b0..ca3cc5f 100644
> > --- a/drivers/net/sh_eth.h
> > +++ b/drivers/net/sh_eth.h
> > @@ -143,10 +143,11 @@
> >
> 
> <snip>
> 
> > +
> > +/* CPU endian from/to EDMAC endian */
> > +#if !defined(CONFIG_CPU_SUBTYPE_SH7619)
> > +#define cpu_to_edmac(x) cpu_to_le32(x)
> > +#define edmac_to_cpu(x) le32_to_cpu(x)
> > +#else
> > +#define cpu_to_edmac(x) cpu_to_be32(x)
> > +#define edmac_to_cpu(x) be32_to_cpu(x)
> > +#endif
> > +
> >  #endif
> I think that this depends on an endian not CPU dependence.

I agree.
But I'm no idea.
Are you have good idea?
 
> Best regards,
>  Nobuhiro