Re: [PATCH net-next 4/4] net: dsa: don't set skb->offload_fwd_mark when not offloading the bridge

[Tobias Waldekranz <tobias@waldekranz.com>]

On Sun, Feb 14, 2021 at 17:53, Vladimir Oltean <olteanv@gmail.com> wrote:
> From: Vladimir Oltean <vladimir.oltean@nxp.com>
>
> DSA has gained the recent ability to deal gracefully with upper
> interfaces it cannot offload, such as the bridge, bonding or team
> drivers. When such uppers exist, the ports are still in standalone mode
> as far as the hardware is concerned.
>
> But when we deliver packets to the software bridge in order for that to
> do the forwarding, there is an unpleasant surprise in that the bridge
> will refuse to forward them. This is because we unconditionally set
> skb->offload_fwd_mark = true, meaning that the bridge thinks the frames
> were already forwarded in hardware by us.
>
> Since dp->bridge_dev is populated only when there is hardware offload
> for it, but not in the software fallback case, let's introduce a new
> helper that can be called from the tagger data path which sets the
> skb->offload_fwd_mark accordingly to zero when there is no hardware
> offload for bridging. This lets the bridge forward packets back to other
> interfaces of our switch, if needed.
>
> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
> ---

For the generic and tag_dsa.c related changes:

Reviewed-by: Tobias Waldekranz <tobias@waldekranz.com>