public inbox for netdev@vger.kernel.org
 help / color / mirror / Atom feed
From: Petr Machata <petrm@nvidia.com>
To: Ioana Ciornei <ioana.ciornei@nxp.com>
Cc: <netdev@vger.kernel.org>, Andrew Lunn <andrew+netdev@lunn.ch>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	"Jakub Kicinski" <kuba@kernel.org>,
	Paolo Abeni <pabeni@redhat.com>, Simon Horman <horms@kernel.org>,
	<linux-kernel@vger.kernel.org>, <petrm@nvidia.com>,
	<willemb@google.com>, <linux-kselftest@vger.kernel.org>
Subject: Re: [PATCH net-next v4 10/10] selftests: drivers: hw: add test for the ethtool standard counters
Date: Mon, 30 Mar 2026 14:03:35 +0200	[thread overview]
Message-ID: <87bjg54ivh.fsf@nvidia.com> (raw)
In-Reply-To: <20260326132828.805703-11-ioana.ciornei@nxp.com>


Ioana Ciornei <ioana.ciornei@nxp.com> writes:

> Add a new selftest - ethtool_std_stats.sh - which validates the
> eth-ctrl, eth-mac and pause standard statistics exported by an
> interface. Collision related eth-mac counters as well as the error ones
> will be checked against zero since that is the most likely correct
> scenario.
>
> The central part of this patch is the traffic_test() function which
> gathers the 'before' counter values, sends a batch of traffic and then
> interrogates again the same counters in order to determine if the delta
> is on target. The function receives an array through which the caller
> can request what counters to be interrogated and, for each of them, what
> is their target delta value.
>
> The output from this selftest looks as follows on a LX2160ARDB board:
>
>  $ ./run_kselftest.sh -t drivers/net/hw:ethtool_std_stats.sh
>  TAP version 13
>  1..1
>  # timeout set to 0
>  # selftests: drivers/net/hw: ethtool_std_stats.sh
>  # TAP version 13
>  # 1..26
>  # ok 1 ethtool_std_stats.eth-ctrl-MACControlFramesTransmitted
>  # ok 2 ethtool_std_stats.eth-ctrl-MACControlFramesReceived
>  # ok 3 ethtool_std_stats.eth-mac-FrameCheckSequenceErrors
>  # ok 4 ethtool_std_stats.eth-mac-AlignmentErrors
>  # ok 5 ethtool_std_stats.eth-mac-FramesLostDueToIntMACXmitError
>  # ok 6 ethtool_std_stats.eth-mac-CarrierSenseErrors # SKIP
>  # ok 7 ethtool_std_stats.eth-mac-FramesLostDueToIntMACRcvError
>  # ok 8 ethtool_std_stats.eth-mac-InRangeLengthErrors # SKIP
>  # ok 9 ethtool_std_stats.eth-mac-OutOfRangeLengthField # SKIP
>  # ok 10 ethtool_std_stats.eth-mac-FrameTooLongErrors # SKIP
>  # ok 11 ethtool_std_stats.eth-mac-FramesAbortedDueToXSColls # SKIP
>  # ok 12 ethtool_std_stats.eth-mac-SingleCollisionFrames # SKIP
>  # ok 13 ethtool_std_stats.eth-mac-MultipleCollisionFrames # SKIP
>  # ok 14 ethtool_std_stats.eth-mac-FramesWithDeferredXmissions # SKIP
>  # ok 15 ethtool_std_stats.eth-mac-LateCollisions # SKIP
>  # ok 16 ethtool_std_stats.eth-mac-FramesWithExcessiveDeferral # SKIP
>  # ok 17 ethtool_std_stats.eth-mac-BroadcastFramesXmittedOK
>  # ok 18 ethtool_std_stats.eth-mac-OctetsTransmittedOK
>  # ok 19 ethtool_std_stats.eth-mac-BroadcastFramesReceivedOK
>  # ok 20 ethtool_std_stats.eth-mac-OctetsReceivedOK
>  # ok 21 ethtool_std_stats.eth-mac-FramesTransmittedOK
>  # ok 22 ethtool_std_stats.eth-mac-MulticastFramesXmittedOK
>  # ok 23 ethtool_std_stats.eth-mac-FramesReceivedOK
>  # ok 24 ethtool_std_stats.eth-mac-MulticastFramesReceivedOK
>  # ok 25 ethtool_std_stats.pause-tx_pause_frames
>  # ok 26 ethtool_std_stats.pause-rx_pause_frames
>  # # 10 skipped test(s) detected.  Consider enabling relevant config options to improve coverage.
>  # # Totals: pass:16 fail:0 xfail:0 xpass:0 skip:10 error:0
>  ok 1 selftests: drivers/net/hw: ethtool_std_stats.sh
>
> Please note that not all MACs are counting the software injected pause
> frames as real Tx pause. For example, on a LS1028ARDB the selftest
> output will reflect the fact that neither the ENETC MAC, nor the Felix
> switch MAC are able to detect Tx pause frames injected by software.
>
>  $ ./run_kselftest.sh -t drivers/net/hw:ethtool_std_stats.sh
>  (...)
>  # # software sent pause frames not detected
>  # ok 25 ethtool_std_stats.pause-tx_pause_frames # XFAIL
>  # ok 26 ethtool_std_stats.pause-rx_pause_frames
>
> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>

I didn't go into details much, but the code looks broadly correct.

Acked-by: Petr Machata <petrm@nvidia.com>

  reply	other threads:[~2026-03-30 12:12 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-03-26 13:28 [PATCH net-next v4 00/10] selftests: drivers: bash support for remote traffic generators Ioana Ciornei
2026-03-26 13:28 ` [PATCH net-next v4 01/10] selftests: forwarding: extend ethtool_std_stats_get with pause statistics Ioana Ciornei
2026-03-26 13:28 ` [PATCH net-next v4 02/10] selftests: net: add helpers for running a command on other targets Ioana Ciornei
2026-03-30 11:02   ` Petr Machata
2026-03-30 11:32     ` Petr Machata
2026-03-30 12:12       ` Ioana Ciornei
2026-03-26 13:28 ` [PATCH net-next v4 03/10] selftests: net: extend lib.sh to parse drivers/net/net.config Ioana Ciornei
2026-03-30 11:28   ` Petr Machata
2026-03-30 12:28     ` Ioana Ciornei
2026-03-26 13:28 ` [PATCH net-next v4 04/10] selftests: net: update some helpers to use run_on Ioana Ciornei
2026-03-30 11:55   ` Petr Machata
2026-03-26 13:28 ` [PATCH net-next v4 05/10] selftests: drivers: hw: cleanup shellcheck warnings in the rmon test Ioana Ciornei
2026-03-26 13:28 ` [PATCH net-next v4 06/10] selftests: drivers: hw: test rmon counters only on first interface Ioana Ciornei
2026-03-26 13:28 ` [PATCH net-next v4 07/10] selftests: drivers: hw: replace counter upper limit with UINT32_MAX in rmon test Ioana Ciornei
2026-03-26 13:28 ` [PATCH net-next v4 08/10] selftests: drivers: hw: move to KTAP output Ioana Ciornei
2026-03-30 12:01   ` Petr Machata
2026-03-26 13:28 ` [PATCH net-next v4 09/10] selftests: drivers: hw: update ethtool_rmon to work with a single local interface Ioana Ciornei
2026-03-26 13:28 ` [PATCH net-next v4 10/10] selftests: drivers: hw: add test for the ethtool standard counters Ioana Ciornei
2026-03-30 12:03   ` Petr Machata [this message]
2026-03-26 19:03 ` [PATCH net-next v4 00/10] selftests: drivers: bash support for remote traffic generators Jakub Kicinski
2026-03-27  7:32   ` Ioana Ciornei
2026-03-28  0:24     ` Jakub Kicinski
2026-03-30 10:38       ` Petr Machata
2026-03-30 11:10         ` Petr Machata
2026-03-30 11:11         ` Ioana Ciornei
2026-03-30 11:52           ` Petr Machata

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87bjg54ivh.fsf@nvidia.com \
    --to=petrm@nvidia.com \
    --cc=andrew+netdev@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=horms@kernel.org \
    --cc=ioana.ciornei@nxp.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-kselftest@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=willemb@google.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox