On Thu Jan 12 2023, Andrew Lunn wrote:
> On Thu, Jan 12, 2023 at 10:12:24AM +0100, Kurt Kanzenbach wrote:
>> The switch receives management traffic such as STP and LLDP. However, PTP
>> messages are not received, only transmitted.
>> 
>> Ideally, the switch would trap all PTP messages to the management CPU. This
>> particular switch has a PTP block which identifies PTP messages and traps them
>> to a dedicated port. There is a register to program this destination. This is
>> not used at the moment.
>> 
>> Therefore, program it to the same port as the MGMT traffic is trapped to. This
>> allows to receive PTP messages as soon as timestamping is enabled.
>> 
>> In addition, the datasheet mentions that this register is not valid e.g., for
>> 6190 variants. So, add a new PTP operation which is only added for the both 6390
>> devices.
>
> I assume this also works for the 6290? Please could you also update
> its _ops structure?

According to the datasheet, yes. I'll add this one, too.

Thanks,
Kurt