From: "Toke Høiland-Jørgensen" <toke@redhat.com>
To: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Cc: Lorenzo Bianconi <lorenzo@kernel.org>,
bpf@vger.kernel.org, netdev@vger.kernel.org, davem@davemloft.net,
kuba@kernel.org, ast@kernel.org, daniel@iogearbox.net,
brouer@redhat.com, pabeni@redhat.com, echaudro@redhat.com,
toshiaki.makita1@gmail.com, andrii@kernel.org
Subject: Re: [PATCH v4 bpf-next 3/3] veth: allow jumbo frames in xdp mode
Date: Thu, 10 Mar 2022 19:53:22 +0100 [thread overview]
Message-ID: <87mthxy6zh.fsf@toke.dk> (raw)
In-Reply-To: <YioT2TGc8M42V2K2@lore-desk>
Lorenzo Bianconi <lorenzo.bianconi@redhat.com> writes:
>> Lorenzo Bianconi <lorenzo@kernel.org> writes:
>>
>> > Allow increasing the MTU over page boundaries on veth devices
>> > if the attached xdp program declares to support xdp fragments.
>> > Enable NETIF_F_ALL_TSO when the device is running in xdp mode.
>> >
>> > Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
>> > ---
>> > drivers/net/veth.c | 28 +++++++++++++++++-----------
>> > 1 file changed, 17 insertions(+), 11 deletions(-)
>> >
>> > diff --git a/drivers/net/veth.c b/drivers/net/veth.c
>> > index 47b21b1d2fd9..c5a2dc2b2e4b 100644
>> > --- a/drivers/net/veth.c
>> > +++ b/drivers/net/veth.c
>> > @@ -293,8 +293,7 @@ static int veth_forward_skb(struct net_device *dev, struct sk_buff *skb,
>> > /* return true if the specified skb has chances of GRO aggregation
>> > * Don't strive for accuracy, but try to avoid GRO overhead in the most
>> > * common scenarios.
>> > - * When XDP is enabled, all traffic is considered eligible, as the xmit
>> > - * device has TSO off.
>> > + * When XDP is enabled, all traffic is considered eligible.
>> > * When TSO is enabled on the xmit device, we are likely interested only
>> > * in UDP aggregation, explicitly check for that if the skb is suspected
>> > * - the sock_wfree destructor is used by UDP, ICMP and XDP sockets -
>> > @@ -302,11 +301,13 @@ static int veth_forward_skb(struct net_device *dev, struct sk_buff *skb,
>> > */
>> > static bool veth_skb_is_eligible_for_gro(const struct net_device *dev,
>> > const struct net_device *rcv,
>> > + const struct veth_rq *rq,
>> > const struct sk_buff *skb)
>> > {
>> > - return !(dev->features & NETIF_F_ALL_TSO) ||
>> > - (skb->destructor == sock_wfree &&
>> > - rcv->features & (NETIF_F_GRO_FRAGLIST | NETIF_F_GRO_UDP_FWD));
>> > + return rcu_access_pointer(rq->xdp_prog) ||
>> > + !(dev->features & NETIF_F_ALL_TSO) ||
>> > + (skb->destructor == sock_wfree &&
>> > + rcv->features & (NETIF_F_GRO_FRAGLIST | NETIF_F_GRO_UDP_FWD));
>> > }
>> >
>> > static netdev_tx_t veth_xmit(struct sk_buff *skb, struct net_device *dev)
>> > @@ -335,7 +336,7 @@ static netdev_tx_t veth_xmit(struct sk_buff *skb, struct net_device *dev)
>> > * Don't bother with napi/GRO if the skb can't be aggregated
>> > */
>> > use_napi = rcu_access_pointer(rq->napi) &&
>> > - veth_skb_is_eligible_for_gro(dev, rcv, skb);
>> > + veth_skb_is_eligible_for_gro(dev, rcv, rq, skb);
>> > }
>> >
>> > skb_tx_timestamp(skb);
>> > @@ -1525,9 +1526,14 @@ static int veth_xdp_set(struct net_device *dev, struct bpf_prog *prog,
>> > goto err;
>> > }
>> >
>> > - max_mtu = PAGE_SIZE - VETH_XDP_HEADROOM -
>> > - peer->hard_header_len -
>> > - SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
>> > + max_mtu = SKB_WITH_OVERHEAD(PAGE_SIZE - VETH_XDP_HEADROOM) -
>> > + peer->hard_header_len;
>>
>> Why are we no longer accounting the size of the skb_shared_info if the
>> program doesn't support frags?
>
> doing so we do not allow packets over page boundaries (so non-linear xdp_buff)
> if the attached program does not delclare to support them, right?
Oh, sorry, somehow completely skipped over the addition of the
SKB_WITH_OVERHEAD() - so thought you were removing the sizeof(struct
skb_shared_info) from the calculation...
>> > + /* Allow increasing the max_mtu if the program supports
>> > + * XDP fragments.
>> > + */
>> > + if (prog->aux->xdp_has_frags)
>> > + max_mtu += PAGE_SIZE * MAX_SKB_FRAGS;
>> > +
>> > if (peer->mtu > max_mtu) {
>> > NL_SET_ERR_MSG_MOD(extack, "Peer MTU is too large to set XDP");
>> > err = -ERANGE;
>> > @@ -1549,7 +1555,7 @@ static int veth_xdp_set(struct net_device *dev, struct bpf_prog *prog,
>> > }
>> >
>> > if (!old_prog) {
>> > - peer->hw_features &= ~NETIF_F_GSO_SOFTWARE;
>> > + peer->hw_features &= ~NETIF_F_GSO_FRAGLIST;
>>
>> The patch description says we're enabling TSO, but this change enables a
>> couple of other flags as well. Also, it's not quite obvious to me why
>> your change makes this possible? Is it because we can now execute XDP on
>> a full TSO packet at once? Because then this should be coupled to the
>> xdp_has_frags flag of the XDP program? Or will the TSO packet be
>> segmented before it hits the XDP program? But then this change has
>> nothing to do with the rest of your series?
>
> actually tso support is not mandatory for this feature (even if it is probably
> meaningful). I will drop it from v5 and we can take care of it in a susequent
> patch.
OK, SGTM
-Toke
prev parent reply other threads:[~2022-03-10 18:53 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-08 16:05 [PATCH v4 bpf-next 0/3] introduce xdp frags support to veth driver Lorenzo Bianconi
2022-03-08 16:05 ` [PATCH v4 bpf-next 1/3] net: veth: account total xdp_frame len running ndo_xdp_xmit Lorenzo Bianconi
2022-03-10 11:10 ` Toke Høiland-Jørgensen
2022-03-15 5:32 ` John Fastabend
2022-03-08 16:05 ` [PATCH v4 bpf-next 2/3] veth: rework veth_xdp_rcv_skb in order to accept non-linear skb Lorenzo Bianconi
2022-03-10 11:21 ` Toke Høiland-Jørgensen
2022-03-10 11:43 ` Lorenzo Bianconi
2022-03-10 19:06 ` Toke Høiland-Jørgensen
2022-03-10 19:26 ` Lorenzo Bianconi
2022-03-10 23:46 ` Lorenzo Bianconi
2022-03-12 21:18 ` Jakub Kicinski
2022-03-08 16:06 ` [PATCH v4 bpf-next 3/3] veth: allow jumbo frames in xdp mode Lorenzo Bianconi
2022-03-10 11:30 ` Toke Høiland-Jørgensen
2022-03-10 15:06 ` Lorenzo Bianconi
2022-03-10 18:53 ` Toke Høiland-Jørgensen [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87mthxy6zh.fsf@toke.dk \
--to=toke@redhat.com \
--cc=andrii@kernel.org \
--cc=ast@kernel.org \
--cc=bpf@vger.kernel.org \
--cc=brouer@redhat.com \
--cc=daniel@iogearbox.net \
--cc=davem@davemloft.net \
--cc=echaudro@redhat.com \
--cc=kuba@kernel.org \
--cc=lorenzo.bianconi@redhat.com \
--cc=lorenzo@kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=toshiaki.makita1@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).