From: "Bjørn Mork" <bjorn@mork.no>
To: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: LKML <linux-kernel@vger.kernel.org>,
Peter Zijlstra <peterz@infradead.org>,
Ingo Molnar <mingo@redhat.com>, Christoph Hellwig <hch@lst.org>,
keescook@chromium.org, John Stultz <john.stultz@linaro.org>,
Thomas Gleixner <tglx@linutronix.de>,
Oliver Neukum <oliver@neukum.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
linux-usb@vger.kernel.org, netdev@vger.kernel.org
Subject: Re: [PATCH 24/25] net/cdc_ncm: Replace tasklet with softirq hrtimer
Date: Thu, 31 Aug 2017 15:57:04 +0200 [thread overview]
Message-ID: <87mv6fzvpr.fsf@miraculix.mork.no> (raw)
In-Reply-To: <20170831105827.479650817@linutronix.de> (Anna-Maria Gleixner's message of "Thu, 31 Aug 2017 12:23:46 -0000")
Anna-Maria Gleixner <anna-maria@linutronix.de> writes:
> From: Thomas Gleixner <tglx@linutronix.de>
>
> The bh tasklet is used in invoke the hrtimer (cdc_ncm_tx_timer_cb) in
> softirq context. This can be also achieved without the tasklet but with
> CLOCK_MONOTONIC_SOFT as hrtimer base.
>
> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
> Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
> Cc: Oliver Neukum <oliver@neukum.org>
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Cc: linux-usb@vger.kernel.org
> Cc: netdev@vger.kernel.org
> ---
> drivers/net/usb/cdc_ncm.c | 37 ++++++++++++++++---------------------
> include/linux/usb/cdc_ncm.h | 2 +-
> 2 files changed, 17 insertions(+), 22 deletions(-)
>
> --- a/drivers/net/usb/cdc_ncm.c
> +++ b/drivers/net/usb/cdc_ncm.c
> @@ -61,7 +61,6 @@ static bool prefer_mbim;
> module_param(prefer_mbim, bool, S_IRUGO | S_IWUSR);
> MODULE_PARM_DESC(prefer_mbim, "Prefer MBIM setting on dual NCM/MBIM functions");
>
> -static void cdc_ncm_txpath_bh(unsigned long param);
> static void cdc_ncm_tx_timeout_start(struct cdc_ncm_ctx *ctx);
> static enum hrtimer_restart cdc_ncm_tx_timer_cb(struct hrtimer *hr_timer);
> static struct usb_driver cdc_ncm_driver;
> @@ -777,10 +776,9 @@ int cdc_ncm_bind_common(struct usbnet *d
> if (!ctx)
> return -ENOMEM;
>
> - hrtimer_init(&ctx->tx_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
> + hrtimer_init(&ctx->tx_timer, CLOCK_MONOTONIC_SOFT, HRTIMER_MODE_REL);
> ctx->tx_timer.function = &cdc_ncm_tx_timer_cb;
> - ctx->bh.data = (unsigned long)dev;
> - ctx->bh.func = cdc_ncm_txpath_bh;
> + ctx->usbnet = dev;
> atomic_set(&ctx->stop, 0);
> spin_lock_init(&ctx->mtx);
>
> @@ -967,10 +965,7 @@ void cdc_ncm_unbind(struct usbnet *dev,
>
> atomic_set(&ctx->stop, 1);
>
> - if (hrtimer_active(&ctx->tx_timer))
> - hrtimer_cancel(&ctx->tx_timer);
> -
> - tasklet_kill(&ctx->bh);
> + hrtimer_cancel(&ctx->tx_timer);
>
> /* handle devices with combined control and data interface */
> if (ctx->control == ctx->data)
> @@ -1348,20 +1343,9 @@ static void cdc_ncm_tx_timeout_start(str
> HRTIMER_MODE_REL);
> }
>
> -static enum hrtimer_restart cdc_ncm_tx_timer_cb(struct hrtimer *timer)
> +static void cdc_ncm_txpath_bh(struct cdc_ncm_ctx *ctx)
> {
> - struct cdc_ncm_ctx *ctx =
> - container_of(timer, struct cdc_ncm_ctx, tx_timer);
> -
> - if (!atomic_read(&ctx->stop))
> - tasklet_schedule(&ctx->bh);
> - return HRTIMER_NORESTART;
> -}
> -
> -static void cdc_ncm_txpath_bh(unsigned long param)
> -{
> - struct usbnet *dev = (struct usbnet *)param;
> - struct cdc_ncm_ctx *ctx = (struct cdc_ncm_ctx *)dev->data[0];
> + struct usbnet *dev = ctx->usbnet;
>
> spin_lock_bh(&ctx->mtx);
> if (ctx->tx_timer_pending != 0) {
> @@ -1379,6 +1363,17 @@ static void cdc_ncm_txpath_bh(unsigned l
> }
> }
>
> +static enum hrtimer_restart cdc_ncm_tx_timer_cb(struct hrtimer *timer)
> +{
> + struct cdc_ncm_ctx *ctx =
> + container_of(timer, struct cdc_ncm_ctx, tx_timer);
> +
> + if (!atomic_read(&ctx->stop))
> + cdc_ncm_txpath_bh(ctx);
> +
> + return HRTIMER_NORESTART;
> +}
> +
> struct sk_buff *
> cdc_ncm_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags)
> {
> --- a/include/linux/usb/cdc_ncm.h
> +++ b/include/linux/usb/cdc_ncm.h
> @@ -92,7 +92,6 @@
> struct cdc_ncm_ctx {
> struct usb_cdc_ncm_ntb_parameters ncm_parm;
> struct hrtimer tx_timer;
> - struct tasklet_struct bh;
>
> const struct usb_cdc_ncm_desc *func_desc;
> const struct usb_cdc_mbim_desc *mbim_desc;
> @@ -101,6 +100,7 @@ struct cdc_ncm_ctx {
>
> struct usb_interface *control;
> struct usb_interface *data;
> + struct usbnet *usbnet;
>
> struct sk_buff *tx_curr_skb;
> struct sk_buff *tx_rem_skb;
I believe the struct usbnet pointer is redundant. We already have lots
of pointers back and forth here. This should work, but is not tested:
struct usbnet *dev = usb_get_intfdata(ctx->control):
Bjørn
next prev parent reply other threads:[~2017-08-31 13:57 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20170831105725.809317030@linutronix.de>
2017-08-31 12:23 ` [PATCH 21/25] xfrm: Replace hrtimer tasklet with softirq hrtimer Anna-Maria Gleixner
2017-08-31 12:23 ` [PATCH 24/25] net/cdc_ncm: Replace " Anna-Maria Gleixner
2017-08-31 13:33 ` Greg Kroah-Hartman
2017-08-31 13:57 ` Bjørn Mork [this message]
2017-09-05 15:42 ` [PATCH 24/25 v2] " Sebastian Andrzej Siewior
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87mv6fzvpr.fsf@miraculix.mork.no \
--to=bjorn@mork.no \
--cc=anna-maria@linutronix.de \
--cc=gregkh@linuxfoundation.org \
--cc=hch@lst.org \
--cc=john.stultz@linaro.org \
--cc=keescook@chromium.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=netdev@vger.kernel.org \
--cc=oliver@neukum.org \
--cc=peterz@infradead.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox