netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Vinicius Costa Gomes <vinicius.gomes@intel.com>
To: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>,
	"David S . Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Jesse Brandeburg <jesse.brandeburg@intel.com>,
	Tony Nguyen <anthony.l.nguyen@intel.com>,
	Simon Horman <horms@kernel.org>,
	Richard Cochran <richardcochran@gmail.com>,
	Paul Menzel <pmenzel@molgen.mpg.de>,
	Sasha Neftin <sasha.neftin@intel.com>
Cc: intel-wired-lan@lists.osuosl.org, netdev@vger.kernel.org,
	linux-kernel@vger.kernel.org, stable@vger.kernel.org,
	Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Subject: Re: [PATCH iwl-net v2 2/3] igc: Fix reset adapter logics when tx mode change
Date: Wed, 10 Jul 2024 16:44:56 -0700	[thread overview]
Message-ID: <87o774u807.fsf@intel.com> (raw)
In-Reply-To: <20240707125318.3425097-3-faizal.abdul.rahim@linux.intel.com>

Faizal Rahim <faizal.abdul.rahim@linux.intel.com> writes:

> Following the "igc: Fix TX Hang issue when QBV Gate is close" changes,
> remaining issues with the reset adapter logic in igc_tsn_offload_apply()
> have been observed:
>
> 1. The reset adapter logics for i225 and i226 differ, although they should
>    be the same according to the guidelines in I225/6 HW Design Section
>    7.5.2.1 on software initialization during tx mode changes.
> 2. The i225 resets adapter every time, even though tx mode doesn't change.
>    This occurs solely based on the condition  igc_is_device_id_i225() when
>    calling schedule_work().
> 3. i226 doesn't reset adapter for tsn->legacy tx mode changes. It only
>    resets adapter for legacy->tsn tx mode transitions.
> 4. qbv_count introduced in the patch is actually not needed; in this
>    context, a non-zero value of qbv_count is used to indicate if tx mode
>    was unconditionally set to tsn in igc_tsn_enable_offload(). This could
>    be replaced by checking the existing register
>    IGC_TQAVCTRL_TRANSMIT_MODE_TSN bit.
>
> This patch resolves all issues and enters schedule_work() to reset the
> adapter only when changing tx mode. It also removes reliance on qbv_count.
>
> qbv_count field will be removed in a future patch.
>
> Test ran:
>
> 1. Verify reset adapter behaviour in i225/6:
>    a) Enrol a new GCL
>       Reset adapter observed (tx mode change legacy->tsn)
>    b) Enrol a new GCL without deleting qdisc
>       No reset adapter observed (tx mode remain tsn->tsn)
>    c) Delete qdisc
>       Reset adapter observed (tx mode change tsn->legacy)
>
> 2. Tested scenario from "igc: Fix TX Hang issue when QBV Gate is closed"
>    to confirm it remains resolved.
>
> Fixes: 175c241288c0 ("igc: Fix TX Hang issue when QBV Gate is closed")
> Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
> Reviewed-by: Simon Horman <horms@kernel.org>
> ---

There were a quite a few bugs, some of them my fault, on this part of
the code, changing between the modes in the hardware.

So I would like some confirmation that ETF offloading/LaunchTime was
also tested with this change. Just to be sure.

But code-wise, looks good:

Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>


Cheers,
-- 
Vinicius

  reply	other threads:[~2024-07-10 23:44 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-07-07 12:53 [PATCH iwl-net v2 0/3] igc bug fixes related to qbv_count usage Faizal Rahim
2024-07-07 12:53 ` [PATCH iwl-net v2 1/3] igc: Fix qbv_config_change_errors logics Faizal Rahim
2024-07-10 23:46   ` Vinicius Costa Gomes
2024-08-01  7:32   ` [Intel-wired-lan] " Mor Bar-Gabay
2024-07-07 12:53 ` [PATCH iwl-net v2 2/3] igc: Fix reset adapter logics when tx mode change Faizal Rahim
2024-07-10 23:44   ` Vinicius Costa Gomes [this message]
2024-07-11 11:50     ` Abdul Rahim, Faizal
2024-07-11 18:10       ` Vinicius Costa Gomes
2024-07-17  7:02         ` Abdul Rahim, Faizal
2024-07-17 22:03           ` Vinicius Costa Gomes
2024-07-22  8:25             ` [Intel-wired-lan] " Rodrigo CADORE CATALDO
2024-08-01  7:36   ` Mor Bar-Gabay
2024-07-07 12:53 ` [PATCH iwl-net v2 3/3] igc: Fix qbv tx latency by setting gtxoffset Faizal Rahim
2024-07-10 23:48   ` Vinicius Costa Gomes
2024-08-01  7:37   ` [Intel-wired-lan] " Mor Bar-Gabay

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87o774u807.fsf@intel.com \
    --to=vinicius.gomes@intel.com \
    --cc=anthony.l.nguyen@intel.com \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=faizal.abdul.rahim@linux.intel.com \
    --cc=horms@kernel.org \
    --cc=intel-wired-lan@lists.osuosl.org \
    --cc=jesse.brandeburg@intel.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=pmenzel@molgen.mpg.de \
    --cc=richardcochran@gmail.com \
    --cc=sasha.neftin@intel.com \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).