From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-0.7 required=3.0 tests=HEADER_FROM_DIFFERENT_DOMAINS, MAILING_LIST_MULTI,SPF_HELO_NONE,SPF_PASS,URIBL_BLOCKED autolearn=no autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id BD0EBC43603 for ; Wed, 11 Dec 2019 09:55:52 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 900B82053B for ; Wed, 11 Dec 2019 09:55:52 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1728398AbfLKJzv (ORCPT ); Wed, 11 Dec 2019 04:55:51 -0500 Received: from guitar.tcltek.co.il ([192.115.133.116]:36144 "EHLO mx.tkos.co.il" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1727493AbfLKJzv (ORCPT ); Wed, 11 Dec 2019 04:55:51 -0500 X-Greylist: delayed 411 seconds by postgrey-1.27 at vger.kernel.org; Wed, 11 Dec 2019 04:55:51 EST Received: from tarshish (unknown [10.0.8.2]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mx.tkos.co.il (Postfix) with ESMTPS id C6D9F440044; Wed, 11 Dec 2019 11:48:57 +0200 (IST) User-agent: mu4e 1.2.0; emacs 26.1 From: Baruch Siach To: Andrew Lunn , Vivien Didelot Cc: netdev@vger.kernel.org, Denis Odintsov Subject: [BUG] mv88e6xxx: tx regression in v5.3 Date: Wed, 11 Dec 2019 11:48:57 +0200 Message-ID: <87tv67tcom.fsf@tarshish> MIME-Version: 1.0 Content-Type: text/plain Sender: netdev-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: netdev@vger.kernel.org Hi Andrew, Vivien, Since kernel v5.3 (tested v5.3.15), the 88E6141 switch on SolidRun Clearfog GT-8K stopped transmitting packets on switch connected ports. Kernel v5.2 works fine (tested v5.2.21). Here are the relevant kernel v5.3 log lines: [ 2.867424] mv88e6085 f412a200.mdio-mii:04: switch 0x3400 detected: Marvell 88E6141, revision 0 [ 2.927445] libphy: mdio: probed [ 3.578496] mv88e6085 f412a200.mdio-mii:04 lan2 (uninitialized): PHY [!cp1!config-space@f4000000!mdio@12a200!switch0@4!mdio:11] driver [Marvell 88E6390] [ 3.595674] mv88e6085 f412a200.mdio-mii:04 lan1 (uninitialized): PHY [!cp1!config-space@f4000000!mdio@12a200!switch0@4!mdio:12] driver [Marvell 88E6390] [ 3.612797] mv88e6085 f412a200.mdio-mii:04 lan4 (uninitialized): PHY [!cp1!config-space@f4000000!mdio@12a200!switch0@4!mdio:13] driver [Marvell 88E6390] [ 3.629910] mv88e6085 f412a200.mdio-mii:04 lan3 (uninitialized): PHY [!cp1!config-space@f4000000!mdio@12a200!switch0@4!mdio:14] driver [Marvell 88E6390] [ 3.646049] mv88e6085 f412a200.mdio-mii:04: configuring for phy/ link mode [ 3.654451] DSA: tree 0 setup ... [ 10.784521] mvpp2 f4000000.ethernet eth2: configuring for fixed/2500base-x link mode [ 10.792401] mvpp2 f4000000.ethernet eth2: Link is Up - 2.5Gbps/Full - flow control off [ 19.817981] mv88e6085 f412a200.mdio-mii:04 lan1: configuring for phy/ link mode [ 19.827083] 8021q: adding VLAN 0 to HW filter on device lan1 [ 21.577276] mv88e6085 f412a200.mdio-mii:04 lan1: Link is Up - 100Mbps/Full - flow control rx/tx [ 21.586030] IPv6: ADDRCONF(NETDEV_CHANGE): lan1: link becomes ready The Tx count on the lan1 interface increments, but the ARP packets don't show on the network. Do you have any idea? Thanks, baruch -- http://baruch.siach.name/blog/ ~. .~ Tk Open Systems =}------------------------------------------------ooO--U--Ooo------------{= - baruch@tkos.co.il - tel: +972.52.368.4656, http://www.tkos.co.il -