netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Scott Branden <scott.branden@broadcom.com>
To: "Arun Parameswaran" <arun.parameswaran@broadcom.com>,
	"Florian Fainelli" <f.fainelli@gmail.com>,
	"Vivien Didelot" <vivien.didelot@savoirfairelinux.com>,
	"Andrew Lunn" <andrew@lunn.ch>,
	"David S. Miller" <davem@davemloft.net>,
	"Clément Péron" <peron.clem@gmail.com>
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
	bcm-kernel-feedback-list@broadcom.com
Subject: Re: [PATCH 1/1] net: dsa: b53: Fix for brcm tag issue in Cygnus SoC
Date: Tue, 5 Jun 2018 13:55:20 -0700	[thread overview]
Message-ID: <8bb9ab39-a38b-9492-975e-d76c864ff8ff@broadcom.com> (raw)
In-Reply-To: <1528231092-31472-1-git-send-email-arun.parameswaran@broadcom.com>

Clement,

Please test this works for your issue.


On 18-06-05 01:38 PM, Arun Parameswaran wrote:
> In the Broadcom Cygnus SoC, the brcm tag needs to be inserted
> in between the mac address and the ether type (should use
> 'DSA_PROTO_TAG_BRCM') for the packets sent to the internal
> b53 switch.
>
> Since the Cygnus was added with the BCM58XX device id and the
> BCM58XX uses 'DSA_PROTO_TAG_BRCM_PREPEND', the data path is
> broken, due to the incorrect brcm tag location.
>
> Add a new b53 device id (BCM583XX) for Cygnus family to fix the
> issue. Add the new device id to the BCM58XX family as Cygnus
> is similar to the BCM58XX in most other functionalities.
>
> Fixes: 11606039604c ("net: dsa: b53: Support prepended Broadcom tags")
>
> Signed-off-by: Arun Parameswaran <arun.parameswaran@broadcom.com>
Acked-by: Scott Branden <scott.branden@broadcom.com>
> ---
>   drivers/net/dsa/b53/b53_common.c | 15 ++++++++++++++-
>   drivers/net/dsa/b53/b53_priv.h   |  2 ++
>   drivers/net/dsa/b53/b53_srab.c   |  4 ++--
>   3 files changed, 18 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
> index 3da5fca..bbc6cc6 100644
> --- a/drivers/net/dsa/b53/b53_common.c
> +++ b/drivers/net/dsa/b53/b53_common.c
> @@ -684,7 +684,8 @@ static int b53_switch_reset(struct b53_device *dev)
>   	 * still use this driver as a library and need to perform the reset
>   	 * earlier.
>   	 */
> -	if (dev->chip_id == BCM58XX_DEVICE_ID) {
> +	if (dev->chip_id == BCM58XX_DEVICE_ID ||
> +	    dev->chip_id == BCM583XX_DEVICE_ID) {
>   		b53_read8(dev, B53_CTRL_PAGE, B53_SOFTRESET, &reg);
>   		reg |= SW_RST | EN_SW_RST | EN_CH_RST;
>   		b53_write8(dev, B53_CTRL_PAGE, B53_SOFTRESET, reg);
> @@ -1880,6 +1881,18 @@ struct b53_chip_data {
>   		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
>   	},
>   	{
> +		.chip_id = BCM583XX_DEVICE_ID,
> +		.dev_name = "BCM583xx/11360",
> +		.vlans = 4096,
> +		.enabled_ports = 0x103,
> +		.arl_entries = 4,
> +		.cpu_port = B53_CPU_PORT,
> +		.vta_regs = B53_VTA_REGS,
> +		.duplex_reg = B53_DUPLEX_STAT_GE,
> +		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
> +		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
> +	},
> +	{
>   		.chip_id = BCM7445_DEVICE_ID,
>   		.dev_name = "BCM7445",
>   		.vlans	= 4096,
> diff --git a/drivers/net/dsa/b53/b53_priv.h b/drivers/net/dsa/b53/b53_priv.h
> index 3b57f47..b232aaa 100644
> --- a/drivers/net/dsa/b53/b53_priv.h
> +++ b/drivers/net/dsa/b53/b53_priv.h
> @@ -62,6 +62,7 @@ enum {
>   	BCM53018_DEVICE_ID = 0x53018,
>   	BCM53019_DEVICE_ID = 0x53019,
>   	BCM58XX_DEVICE_ID = 0x5800,
> +	BCM583XX_DEVICE_ID = 0x58300,
>   	BCM7445_DEVICE_ID = 0x7445,
>   	BCM7278_DEVICE_ID = 0x7278,
>   };
> @@ -181,6 +182,7 @@ static inline int is5301x(struct b53_device *dev)
>   static inline int is58xx(struct b53_device *dev)
>   {
>   	return dev->chip_id == BCM58XX_DEVICE_ID ||
> +		dev->chip_id == BCM583XX_DEVICE_ID ||
>   		dev->chip_id == BCM7445_DEVICE_ID ||
>   		dev->chip_id == BCM7278_DEVICE_ID;
>   }
> diff --git a/drivers/net/dsa/b53/b53_srab.c b/drivers/net/dsa/b53/b53_srab.c
> index c37ffd1..8247481 100644
> --- a/drivers/net/dsa/b53/b53_srab.c
> +++ b/drivers/net/dsa/b53/b53_srab.c
> @@ -364,7 +364,7 @@ static int b53_srab_write64(struct b53_device *dev, u8 page, u8 reg,
>   	{ .compatible = "brcm,bcm53018-srab" },
>   	{ .compatible = "brcm,bcm53019-srab" },
>   	{ .compatible = "brcm,bcm5301x-srab" },
> -	{ .compatible = "brcm,bcm11360-srab", .data = (void *)BCM58XX_DEVICE_ID },
> +	{ .compatible = "brcm,bcm11360-srab", .data = (void *)BCM583XX_DEVICE_ID },
>   	{ .compatible = "brcm,bcm58522-srab", .data = (void *)BCM58XX_DEVICE_ID },
>   	{ .compatible = "brcm,bcm58525-srab", .data = (void *)BCM58XX_DEVICE_ID },
>   	{ .compatible = "brcm,bcm58535-srab", .data = (void *)BCM58XX_DEVICE_ID },
> @@ -372,7 +372,7 @@ static int b53_srab_write64(struct b53_device *dev, u8 page, u8 reg,
>   	{ .compatible = "brcm,bcm58623-srab", .data = (void *)BCM58XX_DEVICE_ID },
>   	{ .compatible = "brcm,bcm58625-srab", .data = (void *)BCM58XX_DEVICE_ID },
>   	{ .compatible = "brcm,bcm88312-srab", .data = (void *)BCM58XX_DEVICE_ID },
> -	{ .compatible = "brcm,cygnus-srab", .data = (void *)BCM58XX_DEVICE_ID },
> +	{ .compatible = "brcm,cygnus-srab", .data = (void *)BCM583XX_DEVICE_ID },
>   	{ .compatible = "brcm,nsp-srab", .data = (void *)BCM58XX_DEVICE_ID },
>   	{ /* sentinel */ },
>   };

  reply	other threads:[~2018-06-05 20:55 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-06-05 20:38 [PATCH 1/1] net: dsa: b53: Fix for brcm tag issue in Cygnus SoC Arun Parameswaran
2018-06-05 20:55 ` Scott Branden [this message]
2018-06-06  8:32   ` Clément Péron
2018-06-05 21:41 ` Florian Fainelli
2018-06-06 17:48   ` David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=8bb9ab39-a38b-9492-975e-d76c864ff8ff@broadcom.com \
    --to=scott.branden@broadcom.com \
    --cc=andrew@lunn.ch \
    --cc=arun.parameswaran@broadcom.com \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=davem@davemloft.net \
    --cc=f.fainelli@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=peron.clem@gmail.com \
    --cc=vivien.didelot@savoirfairelinux.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).