From mboxrd@z Thu Jan 1 00:00:00 1970 From: a1 Subject: Re[4]: e1000 speed/duplex error Date: Tue, 1 Aug 2006 16:20:06 +0400 Message-ID: <911206621.20060801162006@mail.ru> References: <1301563340.20060801141827@mail.ru> <9929d2390608010420t60bd44d7o4e522c6edc0a677e@mail.gmail.com> <793732866.20060801153230@mail.ru> <9929d2390608010445w4fd81b64g310ae90a423e1a7d@mail.gmail.com> Reply-To: a1 Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Cc: netdev@vger.kernel.org Return-path: Received: from mx1.mail.ru ([194.67.23.121]:43892 "EHLO mx1.mail.ru") by vger.kernel.org with ESMTP id S1751265AbWHAMTn (ORCPT ); Tue, 1 Aug 2006 08:19:43 -0400 To: "Jeff Kirsher" In-Reply-To: <9929d2390608010445w4fd81b64g310ae90a423e1a7d@mail.gmail.com> Sender: netdev-owner@vger.kernel.org List-Id: netdev.vger.kernel.org Hi, Jeff. JK> OPTION 2: Turn auto-negotiate on the e1000 card and tell it to only JK> advertise 100 Full Duplex. This will allow negotiation between the JK> two lnk partners and the e1000 will advertise that it is only able to JK> do 100 Full duplex. Is there any way i could do this with ethtool? It only allows force spd/dplx , but not set it for advertising... If i do as follows other side reports 1000/FD: ethtool -s eth0 speed 100 duplex full autoneg on -- Best Regards, a1 mailto:a1k@mail.ru