Re: [PATCH net-next 1/2] net: phy: replace PHY_HAS_INTERRUPT with a check for config_intr and ack_interrupt

[Florian Fainelli <f.fainelli@gmail.com>]

On 11/8/18 1:55 PM, Heiner Kallweit wrote:
> Flag PHY_HAS_INTERRUPT is used only here for this small check. I think
> using interrupts isn't possible if a driver defines neither
> config_intr nor ack_interrupts callback. So we can replace checking
> flag PHY_HAS_INTERRUPT with checking for these callbacks.
> 
> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
> ---
>  drivers/net/phy/phy_device.c | 5 +++--
>  1 file changed, 3 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
> index d165a2c82..33e51b955 100644
> --- a/drivers/net/phy/phy_device.c
> +++ b/drivers/net/phy/phy_device.c
> @@ -2104,8 +2104,9 @@ static int phy_probe(struct device *dev)
>  	/* Disable the interrupt if the PHY doesn't support it
>  	 * but the interrupt is still a valid one
>  	 */
> -	if (!(phydrv->flags & PHY_HAS_INTERRUPT) &&
> -	    phy_interrupt_is_valid(phydev))
> +	 if (!phydrv->config_intr &&
> +	     !phydrv->ack_interrupt &&
> +	     phy_interrupt_is_valid(phydev))
>  		phydev->irq = PHY_POLL;

I would introduce an inline helper function which checks for
drv->config_intr and config_ack_interrupt, that way if we ever have to
introduce an additional function in the future, we just update the
helper to check for that.

Other than that, LGTM
-- 
Florian