Re: [PATCH] dt-bindings: net: adin: Fix adi,phy-output-clock description syntax

[Josua Mayer <josua@solid-run.com>]

Thank you very much for fixing my mistake ... ... fast!

Am 24.05.22 um 17:11 schrieb Geert Uytterhoeven:
> "make dt_binding_check":
> 
>      Documentation/devicetree/bindings/net/adi,adin.yaml:40:77: [error] syntax error: mapping values are not allowed here (syntax)
> 
> The first line of the description ends with a colon, hence the block
> needs to be marked with a "|".
> 
> Fixes: 1f77204e11f8b9e5 ("dt-bindings: net: adin: document phy clock output properties")
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
> ---
>   Documentation/devicetree/bindings/net/adi,adin.yaml | 3 ++-
>   1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/net/adi,adin.yaml b/Documentation/devicetree/bindings/net/adi,adin.yaml
> index 77750df0c2c45e19..88611720545df2ce 100644
> --- a/Documentation/devicetree/bindings/net/adi,adin.yaml
> +++ b/Documentation/devicetree/bindings/net/adi,adin.yaml
> @@ -37,7 +37,8 @@ properties:
>       default: 8
>   
>     adi,phy-output-clock:
> -    description: Select clock output on GP_CLK pin. Two clocks are available:
> +    description: |
> +      Select clock output on GP_CLK pin. Two clocks are available:
>         A 25MHz reference and a free-running 125MHz.
>         The phy can alternatively automatically switch between the reference and
>         the 125MHz clocks based on its internal state.