* Re: [PATCH net-next] myri10ge: fix most sparse warnings
From: David Miller @ 2012-12-05 21:25 UTC (permalink / raw)
To: gallatin; +Cc: netdev
In-Reply-To: <1354652235-13174-1-git-send-email-gallatin@myri.com>
From: Andrew Gallatin <gallatin@myri.com>
Date: Tue, 4 Dec 2012 15:17:15 -0500
> - convert remaining htonl/ntohl +__raw_read/__raw_writel to
> swab32 + readl/writel
> - add missing __iomem qualifier in myri10ge_open()
> - fix dubious: x & !y warning by switching from logical to bitwise not
>
> The swab32 conversion fixes a bug in myri10ge_led() where
> big-endian machines would write the wrong pattern.
>
> The only remaining warning (lock context imbalance) is due to
> the use of __netif_tx_trylock(), and cannot easily be fixed.
>
> Signed-off-by: Andrew Gallatin <gallatin@myri.com>
Applied.
^ permalink raw reply
* Re: [Patch 1/1] net/phy: Add interrupt support for dp83640 phy.
From: David Miller @ 2012-12-05 21:25 UTC (permalink / raw)
To: stephan.gatzka; +Cc: netdev, richardcochran
In-Reply-To: <1354652498-16573-1-git-send-email-stephan.gatzka@gmail.com>
From: Stephan Gatzka <stephan.gatzka@gmail.com>
Date: Tue, 4 Dec 2012 21:21:38 +0100
> Added functions for ack_interrupt and config_intr. Tested on an mpc5200b
> powerpc board.
>
> Signed-off-by: Stephan Gatzka <stephan.gatzka@gmail.com>
Applied.
^ permalink raw reply
* Re: [PATCH net-next 1/2] net: neighbour: prohibit negative value for unres_qlen_bytes parameter
From: David Miller @ 2012-12-05 21:26 UTC (permalink / raw)
To: shanwei88; +Cc: eric.dumazet, netdev
In-Reply-To: <50BED24B.1030205@gmail.com>
From: Shan Wei <shanwei88@gmail.com>
Date: Wed, 05 Dec 2012 12:49:15 +0800
> From: Shan Wei <davidshan@tencent.com>
>
> unres_qlen_bytes and unres_qlen are int type.
> But multiple relation(unres_qlen_bytes = unres_qlen * SKB_TRUESIZE(ETH_FRAME_LEN))
> will cause type overflow when seting unres_qlen. e.g.
>
> $ echo 1027506 > /proc/sys/net/ipv4/neigh/eth1/unres_qlen
> $ cat /proc/sys/net/ipv4/neigh/eth1/unres_qlen
> 1182657265
> $ cat /proc/sys/net/ipv4/neigh/eth1/unres_qlen_bytes
> -2147479756
>
> The gutted value is not that we setting。
> But user/administrator don't know this is caused by int type overflow.
>
> what's more, it is meaningless and even dangerous that unres_qlen_bytes is set
> with negative number. Because, for unresolved neighbour address, kernel will cache packets
> without limit in __neigh_event_send()(e.g. (u32)-1 = 2GB).
>
>
> Signed-off-by: Shan Wei <davidshan@tencent.com>
Applied.
^ permalink raw reply
* Re: [PATCH net-next 2/2] net: doc: add default value for neighbour parameters
From: David Miller @ 2012-12-05 21:26 UTC (permalink / raw)
To: shanwei88; +Cc: eric.dumazet, netdev
In-Reply-To: <50BED29B.4050805@gmail.com>
From: Shan Wei <shanwei88@gmail.com>
Date: Wed, 05 Dec 2012 12:50:35 +0800
> From: Shan Wei <davidshan@tencent.com>
>
> Signed-off-by: Shan Wei <davidshan@tencent.com>
Applied.
^ permalink raw reply
* Re: [PATCH net-next] ipv6: avoid taking locks at socket dismantle
From: David Miller @ 2012-12-05 21:26 UTC (permalink / raw)
To: eric.dumazet; +Cc: netdev
In-Reply-To: <1354735090.31222.21.camel@edumazet-glaptop>
From: Eric Dumazet <eric.dumazet@gmail.com>
Date: Wed, 05 Dec 2012 11:18:10 -0800
> From: Eric Dumazet <edumazet@google.com>
>
> ipv6_sock_mc_close() is called for ipv6 sockets at close time, and most
> of them don't use multicast.
>
> Add a test to avoid contention on a shared spinlock.
>
> Same heuristic applies for ipv6_sock_ac_close(), to avoid contention
> on a shared rwlock.
>
> Signed-off-by: Eric Dumazet <edumazet@google.com>
Applied.
^ permalink raw reply
* Re: [PATCH 1/2 net-next] cnic: Reset iSCSI EQ during shutdown.
From: David Miller @ 2012-12-05 21:26 UTC (permalink / raw)
To: mchan; +Cc: netdev
In-Reply-To: <1354738215-6644-1-git-send-email-mchan@broadcom.com>
From: "Michael Chan" <mchan@broadcom.com>
Date: Wed, 5 Dec 2012 12:10:14 -0800
> Without the reset, reloading the cnic driver can cause the iSCSI
> Event Queue to be out of sync with the driver and cause intermittent
> crash.
>
> Signed-off-by: Michael Chan <mchan@broadcom.com>
> Acked-by: Ariel Elior <ariele@broadcom.com>
Applied.
^ permalink raw reply
* Re: [PATCH 2/2 net-next] cnic: Fix rare race condition during iSCSI disconnect.
From: David Miller @ 2012-12-05 21:26 UTC (permalink / raw)
To: mchan; +Cc: netdev
In-Reply-To: <1354738215-6644-2-git-send-email-mchan@broadcom.com>
From: "Michael Chan" <mchan@broadcom.com>
Date: Wed, 5 Dec 2012 12:10:15 -0800
> From: Eddie Wai <eddie.wai@broadcom.com>
>
> If the initiator and target try to close the connection at about the same
> time, there is a race condition in the termination sequence for bnx2x.
> Fix the problem by waiting for the remote termination to complete before
> deleting the Connection ID. This will prevent the firmware assert.
>
> Update version to 2.5.15.
>
> Signed-off-by: Eddie Wai <eddie.wai@broadcom.com>
> Signed-off-by: Michael Chan <mchan@broadcom.com>
Applied.
^ permalink raw reply
* Should we report bus width/speed via ethtool?
From: Ben Greear @ 2012-12-05 21:35 UTC (permalink / raw)
To: netdev; +Cc: e1000-devel list
It seems the only way to get the current pci-e bus speed & width
in ixgbe (and probably many other NICs) is by parsing output
of lspci -vvv.
I'd personally find it easier if this info were available via
ethtool API.
Any opinions on adding this info? I was thinking something like:
struct ethtool_bus_speed {
u32 cur_speed; /* millions of transactions per sec, or Mhz for older PCI busses */
u32 cur_width; /* bus width */
/* Maximum values supported by NIC */
u32 max_speed;
u32 max_width;
#define BELOW_OPTIMAL_SPEED 0x1 /* Set if NIC cannot run at max speed with current bus settings */
u32 flags;
/* Plenty of space to grow, set to zero until defined */
u32 reserved[32];
};
This could also fit in the reserved space of the
struct ethtool_drvinfo if that were preferred (and
width and flags could be a u16 to save a bit of space
in that case).
Any opinions...or suggestions for other interesting bits to add?
Thanks,
Ben
--
Ben Greear <greearb@candelatech.com>
Candela Technologies Inc http://www.candelatech.com
^ permalink raw reply
* [net-next:master 168/173] net/core/neighbour.c:65:12: warning: 'zero' defined but not used
From: kbuild test robot @ 2012-12-05 21:41 UTC (permalink / raw)
To: Shan Wei; +Cc: netdev
[-- Attachment #1: Type: text/plain, Size: 1542 bytes --]
tree: git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next.git master
head: c2d3babfafbb9f6629cfb47139758e59a5eb0d80
commit: ce46cc64d47a8afaf13c300b09a7f9c29f4979b6 [168/173] net: neighbour: prohibit negative value for unres_qlen_bytes parameter
config: x86_64-randconfig-s410 (attached as .config)
All warnings:
net/core/neighbour.c:65:12: warning: 'zero' defined but not used [-Wunused-variable]
net/core/neighbour.c:66:12: warning: 'unres_qlen_max' defined but not used [-Wunused-variable]
vim +65 +/zero net/core/neighbour.c
^1da177e Linus Torvalds 2005-04-16 59
^1da177e Linus Torvalds 2005-04-16 60 static void neigh_timer_handler(unsigned long arg);
d961db35 Thomas Graf 2007-08-08 61 static void __neigh_notify(struct neighbour *n, int type, int flags);
d961db35 Thomas Graf 2007-08-08 62 static void neigh_update_notify(struct neighbour *neigh);
^1da177e Linus Torvalds 2005-04-16 63 static int pneigh_ifdown(struct neigh_table *tbl, struct net_device *dev);
^1da177e Linus Torvalds 2005-04-16 64
ce46cc64 Shan Wei 2012-12-04 @65 static int zero;
ce46cc64 Shan Wei 2012-12-04 @66 static int unres_qlen_max = INT_MAX / SKB_TRUESIZE(ETH_FRAME_LEN);
ce46cc64 Shan Wei 2012-12-04 67
^1da177e Linus Torvalds 2005-04-16 68 static struct neigh_table *neigh_tables;
45fc3b11 Amos Waterland 2005-09-24 69 #ifdef CONFIG_PROC_FS
---
0-DAY kernel build testing backend Open Source Technology Center
Fengguang Wu, Yuanhan Liu Intel Corporation
[-- Attachment #2: .config --]
[-- Type: text/plain, Size: 49350 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/x86_64 3.7.0-rc7 Kernel Configuration
#
CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_GPIO=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_CPU_AUTOPROBE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11"
CONFIG_ARCH_CPU_PROBE_RELEASE=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_HAVE_IRQ_WORK=y
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y
#
# General setup
#
# CONFIG_EXPERIMENTAL is not set
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
CONFIG_KERNEL_XZ=y
# CONFIG_KERNEL_LZO is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SYSVIPC=y
# CONFIG_FHANDLE is not set
# CONFIG_AUDIT is not set
CONFIG_HAVE_GENERIC_HARDIRQS=y
#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_IRQ_DOMAIN=y
# CONFIG_IRQ_DOMAIN_DEBUG is not set
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y
#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
#
# CPU/Task time and stats accounting
#
# CONFIG_TICK_CPU_ACCOUNTING is not set
CONFIG_IRQ_TIME_ACCOUNTING=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
#
# RCU Subsystem
#
CONFIG_TREE_PREEMPT_RCU=y
CONFIG_PREEMPT_RCU=y
CONFIG_RCU_USER_QS=y
# CONFIG_RCU_USER_QS_FORCE is not set
CONFIG_RCU_FANOUT=64
CONFIG_RCU_FANOUT_LEAF=16
# CONFIG_RCU_FANOUT_EXACT is not set
CONFIG_RCU_FAST_NO_HZ=y
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_RCU_BOOST is not set
CONFIG_IKCONFIG=y
# CONFIG_IKCONFIG_PROC is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_CGROUPS=y
CONFIG_CGROUP_DEBUG=y
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CPUSETS=y
# CONFIG_PROC_PID_CPUSET is not set
# CONFIG_CGROUP_CPUACCT is not set
# CONFIG_RESOURCE_COUNTERS is not set
# CONFIG_CGROUP_PERF is not set
CONFIG_CGROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
CONFIG_CHECKPOINT_RESTORE=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
# CONFIG_RD_LZMA is not set
# CONFIG_RD_XZ is not set
CONFIG_RD_LZO=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_ANON_INODES=y
CONFIG_EXPERT=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
CONFIG_PCSPKR_PLATFORM=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
# CONFIG_BASE_FULL is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_SIGNALFD is not set
# CONFIG_TIMERFD is not set
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_DEBUG_PERF_USE_VMALLOC=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
CONFIG_KPROBES=y
# CONFIG_JUMP_LABEL is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_GENERIC_KERNEL_THREAD=y
CONFIG_GENERIC_KERNEL_EXECVE=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP_FILTER=y
CONFIG_HAVE_RCU_USER_QS=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_MODULES_USE_ELF_RELA=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=1
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
# CONFIG_MODULE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
# CONFIG_MODULE_SIG is not set
CONFIG_STOP_MACHINE=y
# CONFIG_BLOCK is not set
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_FREEZER=y
#
# Processor type and features
#
# CONFIG_ZONE_DMA is not set
CONFIG_SMP=y
CONFIG_X86_MPPARSE=y
# CONFIG_X86_EXTENDED_PLATFORM is not set
# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
CONFIG_PARAVIRT_GUEST=y
# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
CONFIG_XEN=y
CONFIG_XEN_DOM0=y
CONFIG_XEN_PRIVILEGED_GUEST=y
CONFIG_XEN_PVHVM=y
CONFIG_XEN_MAX_DOMAIN_MEMORY=500
CONFIG_XEN_SAVE_RESTORE=y
# CONFIG_XEN_DEBUG_FS is not set
CONFIG_KVM_GUEST=y
CONFIG_PARAVIRT=y
CONFIG_PARAVIRT_CLOCK=y
# CONFIG_PARAVIRT_DEBUG is not set
CONFIG_NO_BOOTMEM=y
CONFIG_MEMTEST=y
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_PROCESSOR_SELECT=y
# CONFIG_CPU_SUP_INTEL is not set
CONFIG_CPU_SUP_AMD=y
# CONFIG_CPU_SUP_CENTAUR is not set
CONFIG_HPET_TIMER=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
CONFIG_NR_CPUS=8
CONFIG_SCHED_SMT=y
# CONFIG_SCHED_MC is not set
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_COUNT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
# CONFIG_X86_MCE is not set
CONFIG_I8K=m
CONFIG_MICROCODE=m
CONFIG_MICROCODE_INTEL=y
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
# CONFIG_X86_MSR is not set
CONFIG_X86_CPUID=m
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_DIRECT_GBPAGES=y
CONFIG_NUMA=y
CONFIG_AMD_NUMA=y
CONFIG_X86_64_ACPI_NUMA=y
CONFIG_NODES_SPAN_OTHER_NODES=y
CONFIG_NUMA_EMU=y
CONFIG_NODES_SHIFT=6
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
# CONFIG_SPARSEMEM_VMEMMAP is not set
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=999999
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_CLEANCACHE=y
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW=64
# CONFIG_MTRR is not set
# CONFIG_ARCH_RANDOM is not set
# CONFIG_X86_SMAP is not set
# CONFIG_EFI is not set
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
CONFIG_HZ_100=y
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
CONFIG_SCHED_HRTICK=y
# CONFIG_KEXEC is not set
CONFIG_CRASH_DUMP=y
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_USE_PERCPU_NUMA_NODE_ID=y
#
# Power management and ACPI options
#
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_AUTOSLEEP=y
# CONFIG_PM_WAKELOCKS is not set
# CONFIG_PM_RUNTIME is not set
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS is not set
# CONFIG_ACPI_PROCFS_POWER is not set
# CONFIG_ACPI_EC_DEBUGFS is not set
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_NUMA=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_SBS is not set
# CONFIG_ACPI_HED is not set
# CONFIG_ACPI_CUSTOM_METHOD is not set
# CONFIG_ACPI_APEI is not set
CONFIG_SFI=y
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=m
CONFIG_CPU_FREQ_STAT=m
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=m
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
#
# x86 CPU frequency scaling drivers
#
# CONFIG_X86_PCC_CPUFREQ is not set
# CONFIG_X86_ACPI_CPUFREQ is not set
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
CONFIG_X86_P4_CLOCKMOD=m
#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=m
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
#
# Memory power savings
#
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
# CONFIG_PCI_MMCONFIG is not set
CONFIG_PCI_XEN=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
# CONFIG_PCI_STUB is not set
CONFIG_XEN_PCIDEV_FRONTEND=y
CONFIG_HT_IRQ=y
# CONFIG_PCI_IOV is not set
# CONFIG_PCI_PRI is not set
# CONFIG_PCI_PASID is not set
# CONFIG_PCI_IOAPIC is not set
CONFIG_PCI_LABEL=y
CONFIG_ISA_DMA_API=y
CONFIG_AMD_NB=y
CONFIG_PCCARD=m
# CONFIG_PCMCIA is not set
CONFIG_CARDBUS=y
#
# PC-card bridges
#
# CONFIG_YENTA is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_RAPIDIO is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_COREDUMP=y
# CONFIG_IA32_EMULATION is not set
CONFIG_HAVE_TEXT_POKE_SMP=y
CONFIG_X86_DEV_DMA_OPS=y
CONFIG_NET=y
#
# Networking options
#
# CONFIG_PACKET is not set
CONFIG_UNIX=y
# CONFIG_UNIX_DIAG is not set
# CONFIG_NET_KEY is not set
# CONFIG_INET is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
# CONFIG_NETPRIO_CGROUP is not set
CONFIG_BQL=y
# CONFIG_BPF_JIT is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_RFKILL_REGULATOR is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_NFC is not set
CONFIG_HAVE_BPF_JIT=y
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=m
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
CONFIG_DEBUG_DEVRES=y
CONFIG_SYS_HYPERVISOR=y
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=m
CONFIG_DMA_SHARED_BUFFER=y
#
# Bus devices
#
# CONFIG_OMAP_OCP2SCP is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=m
# CONFIG_MTD_TESTS is not set
CONFIG_MTD_REDBOOT_PARTS=m
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
#
# CONFIG_MTD_CHAR is not set
# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
#
# CONFIG_MTD_CFI is not set
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_RAM is not set
CONFIG_MTD_ROM=m
# CONFIG_MTD_ABSENT is not set
#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=m
# CONFIG_MTD_PHYSMAP_COMPAT is not set
# CONFIG_MTD_TS5500 is not set
# CONFIG_MTD_PCI is not set
# CONFIG_MTD_GPIO_ADDR is not set
# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
CONFIG_MTD_LATCH_ADDR=m
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
CONFIG_MTD_SLRAM=m
# CONFIG_MTD_PHRAM is not set
CONFIG_MTD_MTDRAM=m
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOC2000 is not set
CONFIG_MTD_DOC2001=m
# CONFIG_MTD_DOC2001PLUS is not set
# CONFIG_MTD_DOCG3 is not set
CONFIG_MTD_DOCPROBE=m
CONFIG_MTD_DOCECC=m
# CONFIG_MTD_DOCPROBE_ADVANCED is not set
CONFIG_MTD_DOCPROBE_ADDRESS=0x0
CONFIG_MTD_NAND_ECC=m
CONFIG_MTD_NAND_ECC_SMC=y
CONFIG_MTD_NAND=m
# CONFIG_MTD_NAND_ECC_BCH is not set
# CONFIG_MTD_SM_COMMON is not set
CONFIG_MTD_NAND_MUSEUM_IDS=y
# CONFIG_MTD_NAND_DENALI is not set
CONFIG_MTD_NAND_IDS=m
# CONFIG_MTD_NAND_RICOH is not set
# CONFIG_MTD_NAND_CAFE is not set
# CONFIG_MTD_NAND_NANDSIM is not set
CONFIG_MTD_NAND_PLATFORM=m
CONFIG_MTD_ONENAND=m
# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
# CONFIG_MTD_ONENAND_GENERIC is not set
# CONFIG_MTD_ONENAND_OTP is not set
CONFIG_MTD_ONENAND_2X_PROGRAM=y
CONFIG_MTD_ONENAND_SIM=m
#
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
# CONFIG_MTD_UBI is not set
CONFIG_PARPORT=m
# CONFIG_PARPORT_PC is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
# CONFIG_PARPORT_1284 is not set
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y
#
# Protocols
#
CONFIG_PNPACPI=y
#
# Misc devices
#
# CONFIG_SENSORS_LIS3LV02D is not set
CONFIG_AD525X_DPOT=m
# CONFIG_AD525X_DPOT_I2C is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_INTEL_MID_PTI is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_APDS9802ALS is not set
CONFIG_ISL29003=m
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
CONFIG_SENSORS_BH1780=m
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
CONFIG_DS1682=m
CONFIG_VMWARE_BALLOON=m
# CONFIG_BMP085_I2C is not set
# CONFIG_PCH_PHUB is not set
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
CONFIG_EEPROM_AT24=m
CONFIG_EEPROM_LEGACY=m
CONFIG_EEPROM_MAX6875=m
CONFIG_EEPROM_93CX6=m
# CONFIG_CB710_CORE is not set
#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
# CONFIG_SENSORS_LIS3_I2C is not set
#
# Altera FPGA firmware download module
#
# CONFIG_ALTERA_STAPL is not set
# CONFIG_INTEL_MEI is not set
CONFIG_HAVE_IDE=y
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_FIREWIRE_NOSY is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
# CONFIG_NETDEVICES is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
CONFIG_INPUT_POLLDEV=m
CONFIG_INPUT_SPARSEKMAP=m
CONFIG_INPUT_MATRIXKMAP=m
#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=m
CONFIG_INPUT_EVBUG=m
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ADP5588=m
CONFIG_KEYBOARD_ADP5589=m
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
CONFIG_KEYBOARD_LKKBD=m
# CONFIG_KEYBOARD_GPIO is not set
CONFIG_KEYBOARD_GPIO_POLLED=m
# CONFIG_KEYBOARD_TCA6416 is not set
CONFIG_KEYBOARD_TCA8418=m
CONFIG_KEYBOARD_MATRIX=m
CONFIG_KEYBOARD_LM8333=m
CONFIG_KEYBOARD_MAX7359=m
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
CONFIG_KEYBOARD_NEWTON=m
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_KEYBOARD_SUNKBD=m
# CONFIG_KEYBOARD_OMAP4 is not set
CONFIG_KEYBOARD_XTKBD=m
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_AD7879=m
# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
CONFIG_TOUCHSCREEN_AUO_PIXCIR=m
# CONFIG_TOUCHSCREEN_BU21013 is not set
# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
CONFIG_TOUCHSCREEN_CYTTSP_CORE=m
# CONFIG_TOUCHSCREEN_CYTTSP_I2C is not set
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
CONFIG_TOUCHSCREEN_HAMPSHIRE=m
CONFIG_TOUCHSCREEN_EETI=m
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_ILI210X is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_WACOM_I2C is not set
# CONFIG_TOUCHSCREEN_MAX11801 is not set
CONFIG_TOUCHSCREEN_MCS5000=m
CONFIG_TOUCHSCREEN_MMS114=m
CONFIG_TOUCHSCREEN_MTOUCH=m
CONFIG_TOUCHSCREEN_INEXIO=m
CONFIG_TOUCHSCREEN_MK712=m
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
CONFIG_TOUCHSCREEN_TOUCHWIN=m
# CONFIG_TOUCHSCREEN_PIXCIR is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
CONFIG_TOUCHSCREEN_MC13783=m
CONFIG_TOUCHSCREEN_TOUCHIT213=m
# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
CONFIG_TOUCHSCREEN_TSC2007=m
CONFIG_TOUCHSCREEN_ST1232=m
CONFIG_TOUCHSCREEN_TPS6507X=m
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_BMA150 is not set
# CONFIG_INPUT_PCSPKR is not set
# CONFIG_INPUT_MC13783_PWRBUTTON is not set
CONFIG_INPUT_MMA8450=m
CONFIG_INPUT_MPU3050=m
CONFIG_INPUT_GP2A=m
CONFIG_INPUT_GPIO_TILT_POLLED=m
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
CONFIG_INPUT_KXTJ9=m
# CONFIG_INPUT_KXTJ9_POLLED_MODE is not set
# CONFIG_INPUT_POWERMATE is not set
CONFIG_INPUT_UINPUT=m
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_CMA3000 is not set
CONFIG_INPUT_XEN_KBDDEV_FRONTEND=m
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
CONFIG_SERIO_CT82C710=m
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_SERIO_ALTERA_PS2=m
CONFIG_SERIO_PS2MULT=m
CONFIG_GAMEPORT=m
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set
# CONFIG_GAMEPORT_EMU10K1 is not set
# CONFIG_GAMEPORT_FM801 is not set
#
# Character devices
#
# CONFIG_VT is not set
# CONFIG_UNIX98_PTYS is not set
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_SYNCLINK is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_SYNCLINK_GT is not set
# CONFIG_NOZOMI is not set
# CONFIG_ISI is not set
# CONFIG_N_HDLC is not set
# CONFIG_N_GSM is not set
# CONFIG_TRACE_ROUTER is not set
CONFIG_TRACE_SINK=m
# CONFIG_DEVKMEM is not set
# CONFIG_STALDRV is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MFD_HSU is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_SCCNXP=m
CONFIG_SERIAL_TIMBERDALE=m
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
CONFIG_SERIAL_ALTERA_UART=m
CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
# CONFIG_SERIAL_PCH_UART is not set
CONFIG_SERIAL_XILINX_PS_UART=m
CONFIG_TTY_PRINTK=y
# CONFIG_PRINTER is not set
CONFIG_PPDEV=m
CONFIG_HVC_DRIVER=y
CONFIG_HVC_IRQ=y
CONFIG_HVC_XEN=y
CONFIG_HVC_XEN_FRONTEND=y
CONFIG_IPMI_HANDLER=m
CONFIG_IPMI_PANIC_EVENT=y
CONFIG_IPMI_PANIC_STRING=y
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
# CONFIG_IPMI_WATCHDOG is not set
# CONFIG_IPMI_POWEROFF is not set
CONFIG_HW_RANDOM=m
CONFIG_HW_RANDOM_TIMERIOMEM=m
CONFIG_HW_RANDOM_INTEL=m
CONFIG_HW_RANDOM_AMD=m
# CONFIG_HW_RANDOM_VIA is not set
# CONFIG_HW_RANDOM_TPM is not set
CONFIG_NVRAM=m
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
CONFIG_R3964=m
# CONFIG_APPLICOM is not set
CONFIG_MWAVE=m
# CONFIG_HPET is not set
CONFIG_HANGCHECK_TIMER=m
CONFIG_TCG_TPM=m
CONFIG_TCG_TIS=m
CONFIG_TCG_TIS_I2C_INFINEON=m
CONFIG_TCG_NSC=m
CONFIG_TCG_ATMEL=m
# CONFIG_TCG_INFINEON is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_CHARDEV=m
# CONFIG_I2C_MUX is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=m
CONFIG_I2C_ALGOBIT=m
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIAPRO is not set
#
# ACPI drivers
#
# CONFIG_I2C_SCMI is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_EG20T is not set
CONFIG_I2C_GPIO=m
# CONFIG_I2C_INTEL_MID is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_PXA_PCI is not set
CONFIG_I2C_SIMTEC=m
#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_PARPORT=m
# CONFIG_I2C_PARPORT_LIGHT is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_DEBUG_CORE is not set
CONFIG_I2C_DEBUG_ALGO=y
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_SPI is not set
# CONFIG_HSI is not set
#
# PPS support
#
# CONFIG_PPS is not set
#
# PPS generators support
#
#
# PTP clock support
#
# CONFIG_PTP_1588_CLOCK is not set
#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
# CONFIG_PTP_1588_CLOCK_PCH is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_GENERIC=m
#
# Memory mapped GPIO drivers:
#
CONFIG_GPIO_GENERIC_PLATFORM=m
# CONFIG_GPIO_IT8761E is not set
# CONFIG_GPIO_SCH is not set
# CONFIG_GPIO_ICH is not set
# CONFIG_GPIO_VX855 is not set
#
# I2C GPIO expanders:
#
# CONFIG_GPIO_MAX7300 is not set
CONFIG_GPIO_MAX732X=m
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_ADP5588 is not set
#
# PCI GPIO expanders:
#
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_AMD8111 is not set
# CONFIG_GPIO_LANGWELL is not set
# CONFIG_GPIO_PCH is not set
# CONFIG_GPIO_ML_IOH is not set
# CONFIG_GPIO_RDC321X is not set
#
# SPI GPIO expanders:
#
# CONFIG_GPIO_MCP23S08 is not set
#
# AC97 GPIO expanders:
#
#
# MODULbus GPIO expanders:
#
CONFIG_W1=m
#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_MATROX is not set
CONFIG_W1_MASTER_DS1WM=m
CONFIG_W1_MASTER_GPIO=m
# CONFIG_HDQ_MASTER_OMAP is not set
#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=m
# CONFIG_W1_SLAVE_SMEM is not set
# CONFIG_W1_SLAVE_DS2408 is not set
CONFIG_W1_SLAVE_DS2423=m
CONFIG_W1_SLAVE_DS2431=m
CONFIG_W1_SLAVE_DS2433=m
# CONFIG_W1_SLAVE_DS2433_CRC is not set
# CONFIG_W1_SLAVE_DS2760 is not set
CONFIG_W1_SLAVE_DS2780=m
CONFIG_W1_SLAVE_DS2781=m
CONFIG_W1_SLAVE_DS28E04=m
CONFIG_W1_SLAVE_BQ27000=m
CONFIG_POWER_SUPPLY=y
CONFIG_POWER_SUPPLY_DEBUG=y
CONFIG_PDA_POWER=m
CONFIG_TEST_POWER=m
CONFIG_BATTERY_DS2780=m
CONFIG_BATTERY_DS2781=m
CONFIG_BATTERY_DS2782=m
CONFIG_BATTERY_SBS=m
CONFIG_BATTERY_BQ27x00=m
# CONFIG_BATTERY_BQ27X00_I2C is not set
CONFIG_BATTERY_BQ27X00_PLATFORM=y
CONFIG_BATTERY_MAX17040=m
CONFIG_BATTERY_MAX17042=m
CONFIG_CHARGER_MAX8903=m
CONFIG_CHARGER_LP8727=m
# CONFIG_CHARGER_GPIO is not set
# CONFIG_CHARGER_SMB347 is not set
# CONFIG_POWER_AVS is not set
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
CONFIG_HWMON_DEBUG_CHIP=y
#
# Native drivers
#
# CONFIG_SENSORS_ABITUGURU is not set
CONFIG_SENSORS_ABITUGURU3=m
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
CONFIG_SENSORS_ADM1025=m
# CONFIG_SENSORS_ADM1026 is not set
CONFIG_SENSORS_ADM1029=m
# CONFIG_SENSORS_ADM1031 is not set
CONFIG_SENSORS_ADM9240=m
# CONFIG_SENSORS_ADT7410 is not set
CONFIG_SENSORS_ADT7411=m
# CONFIG_SENSORS_ADT7462 is not set
CONFIG_SENSORS_ADT7470=m
CONFIG_SENSORS_ADT7475=m
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_K10TEMP is not set
# CONFIG_SENSORS_FAM15H_POWER is not set
CONFIG_SENSORS_ASB100=m
# CONFIG_SENSORS_ATXP1 is not set
CONFIG_SENSORS_DS620=m
CONFIG_SENSORS_DS1621=m
# CONFIG_SENSORS_I5K_AMB is not set
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_F71882FG=m
# CONFIG_SENSORS_F75375S is not set
CONFIG_SENSORS_FSCHMD=m
CONFIG_SENSORS_G760A=m
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
# CONFIG_SENSORS_GPIO_FAN is not set
# CONFIG_SENSORS_HIH6130 is not set
# CONFIG_SENSORS_CORETEMP is not set
# CONFIG_SENSORS_IBMAEM is not set
CONFIG_SENSORS_IBMPEX=m
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_LINEAGE is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM73 is not set
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
CONFIG_SENSORS_LM83=m
# CONFIG_SENSORS_LM85 is not set
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
# CONFIG_SENSORS_LM93 is not set
CONFIG_SENSORS_LTC4151=m
CONFIG_SENSORS_LTC4215=m
# CONFIG_SENSORS_LTC4245 is not set
CONFIG_SENSORS_LTC4261=m
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_LM95245 is not set
CONFIG_SENSORS_MAX16065=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_MAX1668=m
CONFIG_SENSORS_MAX197=m
# CONFIG_SENSORS_MAX6639 is not set
# CONFIG_SENSORS_MAX6642 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_MCP3021 is not set
# CONFIG_SENSORS_NTC_THERMISTOR is not set
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
# CONFIG_SENSORS_PCF8591 is not set
CONFIG_PMBUS=m
CONFIG_SENSORS_PMBUS=m
CONFIG_SENSORS_ADM1275=m
# CONFIG_SENSORS_LM25066 is not set
# CONFIG_SENSORS_LTC2978 is not set
# CONFIG_SENSORS_MAX16064 is not set
# CONFIG_SENSORS_MAX34440 is not set
# CONFIG_SENSORS_MAX8688 is not set
CONFIG_SENSORS_UCD9000=m
CONFIG_SENSORS_UCD9200=m
CONFIG_SENSORS_ZL6100=m
CONFIG_SENSORS_SHT15=m
# CONFIG_SENSORS_SHT21 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMM665 is not set
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_EMC1403=m
CONFIG_SENSORS_EMC2103=m
# CONFIG_SENSORS_EMC6W201 is not set
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_SCH56XX_COMMON=m
CONFIG_SENSORS_SCH5627=m
# CONFIG_SENSORS_SCH5636 is not set
CONFIG_SENSORS_ADS1015=m
CONFIG_SENSORS_ADS7828=m
# CONFIG_SENSORS_AMC6821 is not set
CONFIG_SENSORS_INA2XX=m
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set
CONFIG_SENSORS_TMP401=m
# CONFIG_SENSORS_TMP421 is not set
CONFIG_SENSORS_VIA_CPUTEMP=m
# CONFIG_SENSORS_VIA686A is not set
CONFIG_SENSORS_VT1211=m
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
CONFIG_SENSORS_W83795=m
# CONFIG_SENSORS_W83795_FANCTRL is not set
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83L786NG=m
# CONFIG_SENSORS_W83627HF is not set
CONFIG_SENSORS_W83627EHF=m
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_SENSORS_MC13783_ADC is not set
#
# ACPI drivers
#
# CONFIG_SENSORS_ACPI_POWER is not set
# CONFIG_SENSORS_ATK0110 is not set
CONFIG_THERMAL=y
# CONFIG_CPU_THERMAL is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
CONFIG_WATCHDOG_NOWAYOUT=y
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
CONFIG_ACQUIRE_WDT=m
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_SP5100_TCO is not set
# CONFIG_SC520_WDT is not set
# CONFIG_SBC_FITPC2_WATCHDOG is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
CONFIG_IBMASR=m
CONFIG_WAFER_WDT=m
# CONFIG_I6300ESB_WDT is not set
# CONFIG_IE6XX_WDT is not set
# CONFIG_ITCO_WDT is not set
# CONFIG_IT8712F_WDT is not set
# CONFIG_HP_WATCHDOG is not set
CONFIG_SC1200_WDT=m
CONFIG_PC87413_WDT=m
# CONFIG_NV_TCO is not set
# CONFIG_60XX_WDT is not set
CONFIG_SBC8360_WDT=m
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC_SCH311X_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_VIA_WDT is not set
CONFIG_W83627HF_WDT=m
# CONFIG_W83697HF_WDT is not set
CONFIG_W83697UG_WDT=m
# CONFIG_W83877F_WDT is not set
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
CONFIG_SBC_EPX_C3_WATCHDOG=m
# CONFIG_XEN_WDT is not set
#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
# CONFIG_SSB_B43_PCI_BRIDGE is not set
# CONFIG_SSB_SILENT is not set
CONFIG_SSB_DEBUG=y
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
# CONFIG_SSB_DRIVER_PCICORE is not set
CONFIG_BCMA_POSSIBLE=y
#
# Broadcom specific AMBA
#
CONFIG_BCMA=m
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
# CONFIG_BCMA_HOST_PCI is not set
# CONFIG_BCMA_DRIVER_GMAC_CMN is not set
CONFIG_BCMA_DEBUG=y
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=m
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_LM3533 is not set
CONFIG_TPS6105X=m
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65217 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_PCF50633 is not set
CONFIG_MFD_MC13783=m
CONFIG_MFD_MC13XXX=m
CONFIG_MFD_MC13XXX_I2C=m
CONFIG_ABX500_CORE=y
# CONFIG_MFD_CS5535 is not set
# CONFIG_MFD_TIMBERDALE is not set
# CONFIG_LPC_SCH is not set
# CONFIG_LPC_ICH is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_VX855 is not set
# CONFIG_MFD_WL1273_CORE is not set
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
CONFIG_REGULATOR_DUMMY=y
CONFIG_REGULATOR_FIXED_VOLTAGE=m
CONFIG_REGULATOR_VIRTUAL_CONSUMER=m
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
# CONFIG_REGULATOR_GPIO is not set
# CONFIG_REGULATOR_AD5398 is not set
# CONFIG_REGULATOR_FAN53555 is not set
CONFIG_REGULATOR_MC13XXX_CORE=m
# CONFIG_REGULATOR_MC13783 is not set
CONFIG_REGULATOR_MC13892=m
CONFIG_REGULATOR_ISL6271A=m
# CONFIG_REGULATOR_MAX1586 is not set
# CONFIG_REGULATOR_MAX8649 is not set
# CONFIG_REGULATOR_MAX8660 is not set
CONFIG_REGULATOR_MAX8952=m
# CONFIG_REGULATOR_LP3971 is not set
# CONFIG_REGULATOR_LP3972 is not set
CONFIG_REGULATOR_TPS6105X=m
# CONFIG_REGULATOR_TPS62360 is not set
CONFIG_REGULATOR_TPS65023=m
CONFIG_REGULATOR_TPS6507X=m
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_VGA_SWITCHEROO is not set
CONFIG_DRM=m
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_NOUVEAU is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_STUB_POULSBO is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
# CONFIG_FB is not set
# CONFIG_EXYNOS_VIDEO is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
CONFIG_SOUND=m
# CONFIG_SOUND_OSS_CORE is not set
# CONFIG_SND is not set
# CONFIG_SOUND_PRIME is not set
#
# HID support
#
CONFIG_HID=m
CONFIG_HIDRAW=y
# CONFIG_UHID is not set
# CONFIG_HID_GENERIC is not set
#
# Special HID drivers
#
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB_ARCH_HAS_XHCI=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
# CONFIG_USB_HCD_BCMA is not set
# CONFIG_USB_HCD_SSB is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_EZUSB_FX2 is not set
# CONFIG_OMAP_USB2 is not set
# CONFIG_USB_GADGET is not set
#
# OTG and related infrastructure
#
# CONFIG_MMC is not set
CONFIG_MEMSTICK=m
CONFIG_MEMSTICK_DEBUG=y
#
# MemoryStick drivers
#
CONFIG_MEMSTICK_UNSAFE_RESUME=y
#
# MemoryStick Host Controller Drivers
#
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set
#
# DMA Devices
#
# CONFIG_INTEL_MID_DMAC is not set
# CONFIG_INTEL_IOATDMA is not set
CONFIG_TIMB_DMA=m
# CONFIG_PCH_DMA is not set
CONFIG_DMA_ENGINE=y
#
# DMA Clients
#
# CONFIG_NET_DMA is not set
CONFIG_ASYNC_TX_DMA=y
CONFIG_DMATEST=m
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
#
# Virtio drivers
#
#
# Microsoft Hyper-V guest support
#
# CONFIG_HYPERV is not set
#
# Xen driver support
#
CONFIG_XEN_BALLOON=y
CONFIG_XEN_SCRUB_PAGES=y
CONFIG_XEN_DEV_EVTCHN=m
CONFIG_XEN_BACKEND=y
CONFIG_XENFS=m
# CONFIG_XEN_COMPAT_XENFS is not set
CONFIG_XEN_SYS_HYPERVISOR=y
CONFIG_XEN_XENBUS_FRONTEND=y
# CONFIG_XEN_GNTDEV is not set
# CONFIG_XEN_GRANT_DEV_ALLOC is not set
CONFIG_SWIOTLB_XEN=y
CONFIG_XEN_TMEM=y
CONFIG_XEN_PCIDEV_BACKEND=m
CONFIG_XEN_PRIVCMD=m
CONFIG_XEN_ACPI_PROCESSOR=m
CONFIG_STAGING=y
# CONFIG_SLICOSS is not set
CONFIG_ECHO=m
CONFIG_COMEDI=m
# CONFIG_COMEDI_DEBUG is not set
CONFIG_COMEDI_DEFAULT_BUF_SIZE_KB=2048
CONFIG_COMEDI_DEFAULT_BUF_MAXSIZE_KB=20480
# CONFIG_COMEDI_MISC_DRIVERS is not set
# CONFIG_COMEDI_PCI_DRIVERS is not set
CONFIG_COMEDI_8255=m
# CONFIG_PANEL is not set
# CONFIG_DX_SEP is not set
# CONFIG_ZSMALLOC is not set
# CONFIG_CRYSTALHD is not set
# CONFIG_ACPI_QUICKSTART is not set
CONFIG_FT1000=m
#
# Speakup console speech
#
# CONFIG_TOUCHSCREEN_CLEARPAD_TM1217 is not set
# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set
# CONFIG_STAGING_MEDIA is not set
#
# Android
#
# CONFIG_ANDROID is not set
# CONFIG_PHONE is not set
CONFIG_IPACK_BUS=m
# CONFIG_BOARD_TPCI200 is not set
# CONFIG_SERIAL_IPOCTAL is not set
# CONFIG_WIMAX_GDM72XX is not set
CONFIG_NET_VENDOR_SILICOM=y
# CONFIG_SBYPASS is not set
# CONFIG_BPCTL is not set
# CONFIG_DGRP is not set
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACERHDF is not set
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_FUJITSU_TABLET is not set
# CONFIG_HP_ACCEL is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_INTEL_MENLOW is not set
# CONFIG_ACPI_WMI is not set
# CONFIG_TOPSTAR_LAPTOP is not set
# CONFIG_TOSHIBA_BT_RFKILL is not set
# CONFIG_ACPI_CMPC is not set
# CONFIG_INTEL_IPS is not set
# CONFIG_IBM_RTL is not set
# CONFIG_XO15_EBOOK is not set
# CONFIG_SAMSUNG_Q10 is not set
#
# Hardware Spinlock drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
# CONFIG_IOMMU_SUPPORT is not set
#
# Remoteproc drivers (EXPERIMENTAL)
#
#
# Rpmsg drivers (EXPERIMENTAL)
#
CONFIG_VIRT_DRIVERS=y
# CONFIG_PM_DEVFREQ is not set
CONFIG_EXTCON=m
#
# Extcon Device Drivers
#
# CONFIG_EXTCON_GPIO is not set
CONFIG_MEMORY=y
# CONFIG_IIO is not set
# CONFIG_VME_BUS is not set
CONFIG_PWM=y
#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_FIRMWARE_MEMMAP is not set
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
# CONFIG_DMIID is not set
# CONFIG_DMI_SYSFS is not set
CONFIG_ISCSI_IBFT_FIND=y
CONFIG_GOOGLE_FIRMWARE=y
#
# Google Firmware Drivers
#
# CONFIG_GOOGLE_SMI is not set
CONFIG_GOOGLE_MEMCONSOLE=m
#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_FS_POSIX_ACL=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY_USER is not set
CONFIG_FANOTIFY=y
# CONFIG_QUOTA is not set
# CONFIG_QUOTACTL is not set
CONFIG_AUTOFS4_FS=m
# CONFIG_FUSE_FS is not set
CONFIG_GENERIC_ACL=y
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
# CONFIG_PROC_VMCORE is not set
# CONFIG_PROC_SYSCTL is not set
# CONFIG_PROC_PAGE_MONITOR is not set
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=m
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
# CONFIG_NLS_CODEPAGE_863 is not set
CONFIG_NLS_CODEPAGE_864=m
# CONFIG_NLS_CODEPAGE_865 is not set
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
CONFIG_NLS_ISO8859_3=m
# CONFIG_NLS_ISO8859_4 is not set
CONFIG_NLS_ISO8859_5=m
# CONFIG_NLS_ISO8859_6 is not set
CONFIG_NLS_ISO8859_7=m
# CONFIG_NLS_ISO8859_9 is not set
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
# CONFIG_NLS_ISO8859_15 is not set
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_MAC_ROMAN=m
# CONFIG_NLS_MAC_CELTIC is not set
CONFIG_NLS_MAC_CENTEURO=m
CONFIG_NLS_MAC_CROATIAN=m
# CONFIG_NLS_MAC_CYRILLIC is not set
CONFIG_NLS_MAC_GAELIC=m
CONFIG_NLS_MAC_GREEK=m
CONFIG_NLS_MAC_ICELAND=m
# CONFIG_NLS_MAC_INUIT is not set
CONFIG_NLS_MAC_ROMANIAN=m
CONFIG_NLS_MAC_TURKISH=m
# CONFIG_NLS_UTF8 is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
# CONFIG_MAGIC_SYSRQ is not set
CONFIG_STRIP_ASM_SYMS=y
CONFIG_READABLE_ASM=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
# CONFIG_LOCKUP_DETECTOR is not set
CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_ON_OOPS_VALUE=1
# CONFIG_DETECT_HUNG_TASK is not set
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_PROVE_RCU=y
CONFIG_PROVE_RCU_REPEATEDLY=y
CONFIG_PROVE_RCU_DELAY=y
CONFIG_SPARSE_RCU_POINTER=y
CONFIG_LOCKDEP=y
CONFIG_LOCK_STAT=y
CONFIG_DEBUG_LOCKDEP=y
CONFIG_TRACE_IRQFLAGS=y
CONFIG_DEBUG_ATOMIC_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
CONFIG_DEBUG_STACK_USAGE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_TEST_LIST_SORT is not set
CONFIG_DEBUG_SG=y
CONFIG_DEBUG_NOTIFIERS=y
CONFIG_DEBUG_CREDENTIALS=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=60
# CONFIG_RCU_CPU_STALL_VERBOSE is not set
# CONFIG_RCU_CPU_STALL_INFO is not set
# CONFIG_RCU_TRACE is not set
CONFIG_KPROBES_SANITY_TEST=y
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
CONFIG_DEBUG_PER_CPU_MAPS=y
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_LATENCYTOP=y
CONFIG_DEBUG_PAGEALLOC=y
CONFIG_WANT_PAGE_DEBUG_FLAGS=y
CONFIG_PAGE_GUARD=y
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_EVENT_POWER_TRACING_DEPRECATED=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
# CONFIG_IRQSOFF_TRACER is not set
CONFIG_PREEMPT_TRACER=y
CONFIG_SCHED_TRACER=y
# CONFIG_FTRACE_SYSCALLS is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
CONFIG_STACK_TRACER=y
# CONFIG_KPROBE_EVENT is not set
# CONFIG_UPROBE_EVENT is not set
# CONFIG_PROBE_EVENTS is not set
# CONFIG_DYNAMIC_FTRACE is not set
CONFIG_FUNCTION_PROFILER=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_MMIOTRACE is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_RBTREE_TEST is not set
# CONFIG_INTERVAL_TREE_TEST is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_DYNAMIC_DEBUG is not set
CONFIG_DMA_API_DEBUG=y
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_STRICT_DEVMEM is not set
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
CONFIG_X86_PTDUMP=y
# CONFIG_DEBUG_RODATA is not set
CONFIG_DEBUG_SET_MODULE_RONX=y
CONFIG_DEBUG_NX_TEST=m
# CONFIG_DEBUG_TLBFLUSH is not set
# CONFIG_IOMMU_DEBUG is not set
CONFIG_IOMMU_STRESS=y
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
# CONFIG_X86_DECODER_SELFTEST is not set
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not set
CONFIG_IO_DELAY_0XED=y
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=1
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
# CONFIG_OPTIMIZE_INLINING is not set
# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
CONFIG_DEBUG_NMI_SELFTEST=y
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
# CONFIG_SECURITY is not set
CONFIG_SECURITYFS=y
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=m
#
# Crypto core or helper
#
CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_ALGAPI=m
CONFIG_CRYPTO_ALGAPI2=m
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_AEAD2=m
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_BLKCIPHER2=m
CONFIG_CRYPTO_HASH=m
CONFIG_CRYPTO_HASH2=m
CONFIG_CRYPTO_RNG=m
CONFIG_CRYPTO_RNG2=m
CONFIG_CRYPTO_PCOMP=m
CONFIG_CRYPTO_PCOMP2=m
CONFIG_CRYPTO_MANAGER=m
CONFIG_CRYPTO_MANAGER2=m
# CONFIG_CRYPTO_USER is not set
# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_WORKQUEUE=m
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_TEST is not set
CONFIG_CRYPTO_GLUE_HELPER_X86=m
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_SEQIV=m
#
# Block modes
#
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_CTS=m
# CONFIG_CRYPTO_ECB is not set
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
#
# Hash modes
#
CONFIG_CRYPTO_HMAC=m
#
# Digest
#
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_CRC32C_INTEL=m
CONFIG_CRYPTO_GHASH=m
CONFIG_CRYPTO_MD4=m
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA1_SSSE3=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m
#
# Ciphers
#
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_AES_X86_64=m
# CONFIG_CRYPTO_AES_NI_INTEL is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_BLOWFISH_COMMON=m
CONFIG_CRYPTO_BLOWFISH_X86_64=m
# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_CAMELLIA_X86_64=m
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST5_AVX_X86_64 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_CAST6_AVX_X86_64 is not set
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_SERPENT_SSE2_X86_64 is not set
# CONFIG_CRYPTO_SERPENT_AVX_X86_64 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_X86_64=m
CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=m
# CONFIG_CRYPTO_TWOFISH_AVX_X86_64 is not set
#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
CONFIG_CRYPTO_ZLIB=m
# CONFIG_CRYPTO_LZO is not set
#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
# CONFIG_CRYPTO_USER_API_HASH is not set
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=m
# CONFIG_CRYPTO_DEV_PADLOCK_AES is not set
CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
CONFIG_HAVE_KVM=y
# CONFIG_VIRTUALIZATION is not set
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_BITREVERSE=m
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IO=y
# CONFIG_CRC_CCITT is not set
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=m
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=m
# CONFIG_CRC32_SELFTEST is not set
# CONFIG_CRC32_SLICEBY8 is not set
# CONFIG_CRC32_SLICEBY4 is not set
CONFIG_CRC32_SARWATE=y
# CONFIG_CRC32_BIT is not set
CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
CONFIG_CRC8=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
# CONFIG_XZ_DEC is not set
# CONFIG_XZ_DEC_BCJ is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
# CONFIG_CPUMASK_OFFSTACK is not set
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_NLATTR=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
# CONFIG_AVERAGE is not set
CONFIG_CORDIC=m
# CONFIG_DDR is not set
^ permalink raw reply
* Re: [PATCH rfc] netfilter: two xtables matches
From: Willem de Bruijn @ 2012-12-05 21:45 UTC (permalink / raw)
To: Jan Engelhardt
Cc: netfilter-devel, netdev, Eric Dumazet, David Miller,
Patrick McHardy, pablo
In-Reply-To: <alpine.LNX.2.01.1212052100190.30908@nerf07.vanv.qr>
On Wed, Dec 5, 2012 at 3:00 PM, Jan Engelhardt <jengelh@inai.de> wrote:
> On Wednesday 2012-12-05 20:28, Willem de Bruijn wrote:
>
>>Somehow, the first part of this email went missing. Not critical,
>>but for completeness:
>>
>>These two patches each add an xtables match.
>>
>>The xt_priority match is a straighforward addition in the style of
>>xt_mark, adding the option to filter on one more sk_buff field. I
>>have an immediate application for this. The amount of code (in
>>kernel + userspace) to add a single check proved quite large.
>
> Hm so yeah, can't we just place this in xt_mark.c?
I'm happy to do so, but note that that breaks the custom of
having one static struct xt_$NAME for each file xt_$NAME.[ch].
It may be reasonable, as the same issue may keep popping up
as additional sk_buff fields are found useful for filtering. For
instance, skb->queue_mapping could be used in conjuction with
network flow classification (ethtool -N). All the ancillary data
accessible from BPF likely has some use and could be ported
to iptables (rxhash, pkt_type, ...).
To avoid rule explosion, I considered an xt_skbuff match rule that
applies the same mask operation, range and inversion tests, and
takes a field id to select the sk_buff field to operate on. I think
the BPF patch is a better long term solution.
^ permalink raw reply
* Re: [PATCH rfc] netfilter: two xtables matches
From: Willem de Bruijn @ 2012-12-05 21:50 UTC (permalink / raw)
To: Jan Engelhardt
Cc: netfilter-devel, netdev, Eric Dumazet, David Miller,
Patrick McHardy, Pablo Neira Ayuso
In-Reply-To: <CA+FuTSfTVvQ8uBuSh47DRpShL5fyzNCaRXz39N1EaDqZCe8_+A@mail.gmail.com>
On Wed, Dec 5, 2012 at 4:45 PM, Willem de Bruijn <willemb@google.com> wrote:
> On Wed, Dec 5, 2012 at 3:00 PM, Jan Engelhardt <jengelh@inai.de> wrote:
>> On Wednesday 2012-12-05 20:28, Willem de Bruijn wrote:
>>
>>>Somehow, the first part of this email went missing. Not critical,
>>>but for completeness:
>>>
>>>These two patches each add an xtables match.
>>>
>>>The xt_priority match is a straighforward addition in the style of
>>>xt_mark, adding the option to filter on one more sk_buff field. I
>>>have an immediate application for this. The amount of code (in
>>>kernel + userspace) to add a single check proved quite large.
>>
>> Hm so yeah, can't we just place this in xt_mark.c?
>
> I'm happy to do so, but note that that breaks the custom of
> having one static struct xt_$NAME for each file xt_$NAME.[ch].
>
> It may be reasonable, as the same issue may keep popping up
> as additional sk_buff fields are found useful for filtering. For
> instance, skb->queue_mapping could be used in conjuction with
> network flow classification (ethtool -N).
bad example: queue_mapping is tx only. I thought of rxqueues.
> All the ancillary data
> accessible from BPF likely has some use and could be ported
> to iptables (rxhash, pkt_type, ...).
>
> To avoid rule explosion, I considered an xt_skbuff match rule that
> applies the same mask operation, range and inversion tests, and
> takes a field id to select the sk_buff field to operate on. I think
> the BPF patch is a better long term solution.
^ permalink raw reply
* Re: [PATCH rfc] netfilter: two xtables matches
From: Jan Engelhardt @ 2012-12-05 22:35 UTC (permalink / raw)
To: Willem de Bruijn
Cc: netfilter-devel, netdev, Eric Dumazet, David Miller,
Patrick McHardy, pablo
In-Reply-To: <CA+FuTSfTVvQ8uBuSh47DRpShL5fyzNCaRXz39N1EaDqZCe8_+A@mail.gmail.com>
On Wednesday 2012-12-05 22:45, Willem de Bruijn wrote:
>>>The xt_priority match is a straighforward addition in the style of
>>>xt_mark, adding the option to filter on one more sk_buff field. I
>>>have an immediate application for this. The amount of code (in
>>>kernel + userspace) to add a single check proved quite large.
>>
>> Hm so yeah, can't we just place this in xt_mark.c?
>
>I'm happy to do so, but note that that breaks the custom of
>having one static struct xt_$NAME for each file xt_$NAME.[ch].
The custom is long gone (just look at xt_mark.c ;-),
because the module overhead is so much more than a function with
an assignment/readout.
>To avoid rule explosion, I considered an xt_skbuff match rule that
>applies the same mask operation, range and inversion tests, and
>takes a field id to select the sk_buff field to operate on. I think
>the BPF patch is a better long term solution.
I can't disagree.
^ permalink raw reply
* Re: Should we report bus width/speed via ethtool?
From: David Miller @ 2012-12-05 22:36 UTC (permalink / raw)
To: greearb; +Cc: netdev, e1000-devel
In-Reply-To: <50BFBE05.7020408@candelatech.com>
From: Ben Greear <greearb@candelatech.com>
Date: Wed, 05 Dec 2012 13:35:01 -0800
> It seems the only way to get the current pci-e bus speed & width
> in ixgbe (and probably many other NICs) is by parsing output
> of lspci -vvv.
>
> I'd personally find it easier if this info were available via
> ethtool API.
You could just as easily have ethtool determine the PCI device
location (using existing facilities) and fetch the PCI-e info from the
PCI sysfs files.
There is no reason to extend ethtool for this.
^ permalink raw reply
* [PATCH net 1/1] r8169: workaround for missing extended GigaMAC registers
From: Francois Romieu @ 2012-12-05 22:34 UTC (permalink / raw)
To: netdev; +Cc: David Miller, Lee Chun-Yi, Wang YanQing, Hayes Wang
GigaMAC registers have been reported left unitialized in several
situations:
- after cold boot from power-off state
- after S3 resume
Tweaking rtl_hw_phy_config takes care of both.
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Hayes Wang <hayeswang@realtek.com>
---
drivers/net/ethernet/realtek/r8169.c | 42 ++++++++++++++++++++----------------
1 file changed, 24 insertions(+), 18 deletions(-)
YanQing and Chun-Yi, can you add your Signed-off-by to this patch ?
It contains bits of everybody's work but it does not match any. :o)
I apparently play in the safe bios league since I did not notice any
difference before or after the patch.
Beware, this patch seems to apply to net-next but doing so moves
rtl_rar_exgmac_set from rtl8168e_2_hw_phy_config to rtl8168f_hw_phy_config.
Hayes, your comments are welcome if any.
diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c
index 927aa33..b353003 100644
--- a/drivers/net/ethernet/realtek/r8169.c
+++ b/drivers/net/ethernet/realtek/r8169.c
@@ -3096,6 +3096,23 @@ static void rtl8168e_1_hw_phy_config(struct rtl8169_private *tp)
rtl_writephy(tp, 0x0d, 0x0000);
}
+static void rtl_rar_exgmac_set(struct rtl8169_private *tp, u8 *addr)
+{
+ const u16 w[] = {
+ addr[0] | (addr[1] << 8),
+ addr[2] | (addr[3] << 8),
+ addr[4] | (addr[5] << 8)
+ };
+ const struct exgmac_reg e[] = {
+ { .addr = 0xe0, ERIAR_MASK_1111, .val = w[0] | (w[1] << 16) },
+ { .addr = 0xe4, ERIAR_MASK_1111, .val = w[2] },
+ { .addr = 0xf0, ERIAR_MASK_1111, .val = w[0] << 16 },
+ { .addr = 0xf4, ERIAR_MASK_1111, .val = w[1] | (w[2] << 16) },
+ };
+
+ rtl_write_exgmac_batch(tp, e, ARRAY_SIZE(e));
+}
+
static void rtl8168e_2_hw_phy_config(struct rtl8169_private *tp)
{
static const struct phy_reg phy_reg_init[] = {
@@ -3178,6 +3195,9 @@ static void rtl8168e_2_hw_phy_config(struct rtl8169_private *tp)
rtl_w1w0_phy(tp, 0x19, 0x0000, 0x0001);
rtl_w1w0_phy(tp, 0x10, 0x0000, 0x0400);
rtl_writephy(tp, 0x1f, 0x0000);
+
+ /* Broken BIOS workaround: feed GigaMAC registers with MAC address. */
+ rtl_rar_exgmac_set(tp, tp->dev->dev_addr);
}
static void rtl8168f_hw_phy_config(struct rtl8169_private *tp)
@@ -3708,33 +3728,19 @@ static void rtl8169_init_phy(struct net_device *dev, struct rtl8169_private *tp)
static void rtl_rar_set(struct rtl8169_private *tp, u8 *addr)
{
void __iomem *ioaddr = tp->mmio_addr;
- u32 high;
- u32 low;
-
- low = addr[0] | (addr[1] << 8) | (addr[2] << 16) | (addr[3] << 24);
- high = addr[4] | (addr[5] << 8);
rtl_lock_work(tp);
RTL_W8(Cfg9346, Cfg9346_Unlock);
- RTL_W32(MAC4, high);
+ RTL_W32(MAC4, addr[4] | addr[5] << 8);
RTL_R32(MAC4);
- RTL_W32(MAC0, low);
+ RTL_W32(MAC0, addr[0] | addr[1] << 8 | addr[2] << 16 | addr[3] << 24);
RTL_R32(MAC0);
- if (tp->mac_version == RTL_GIGA_MAC_VER_34) {
- const struct exgmac_reg e[] = {
- { .addr = 0xe0, ERIAR_MASK_1111, .val = low },
- { .addr = 0xe4, ERIAR_MASK_1111, .val = high },
- { .addr = 0xf0, ERIAR_MASK_1111, .val = low << 16 },
- { .addr = 0xf4, ERIAR_MASK_1111, .val = high << 16 |
- low >> 16 },
- };
-
- rtl_write_exgmac_batch(tp, e, ARRAY_SIZE(e));
- }
+ if (tp->mac_version == RTL_GIGA_MAC_VER_34)
+ rtl_rar_exgmac_set(tp, addr);
RTL_W8(Cfg9346, Cfg9346_Lock);
--
1.7.11.7
^ permalink raw reply related
* Re: Should we report bus width/speed via ethtool?
From: Ben Greear @ 2012-12-05 23:09 UTC (permalink / raw)
To: David Miller; +Cc: netdev, e1000-devel
In-Reply-To: <20121205.173650.1310171220758794440.davem@davemloft.net>
On 12/05/2012 02:36 PM, David Miller wrote:
> From: Ben Greear <greearb@candelatech.com>
> Date: Wed, 05 Dec 2012 13:35:01 -0800
>
>> It seems the only way to get the current pci-e bus speed & width
>> in ixgbe (and probably many other NICs) is by parsing output
>> of lspci -vvv.
>>
>> I'd personally find it easier if this info were available via
>> ethtool API.
>
> You could just as easily have ethtool determine the PCI device
> location (using existing facilities) and fetch the PCI-e info from the
> PCI sysfs files.
Any particular sysfs file? I've been grubbing around in there
and I don't see anything that specifies bus width or speed..
Maybe it's some binary blob that needs decoding?
Thanks,
Ben
--
Ben Greear <greearb@candelatech.com>
Candela Technologies Inc http://www.candelatech.com
^ permalink raw reply
* Re: NETDEV WATCHDOG: eth1 (r8169): transmit queue 0 timed out
From: Francois Romieu @ 2012-12-05 22:47 UTC (permalink / raw)
To: Dave Jones; +Cc: netdev
In-Reply-To: <20121205011910.GA16531@redhat.com>
Dave Jones <davej@redhat.com> :
> Mezigues :
> > Dave Jones <davej@redhat.com> :
> > [...]
> > > Anything else I can provide ?
> > Please send the XID of the device.
>
> [ 55.576012] r8169 0000:01:00.0 eth0: RTL8168d/8111d at 0xffffc9000037a000, 70:71:bc:63:19:05, XID 081000c0 IRQ 46
> [ 55.805446] r8169 0000:05:00.0 eth1: RTL8110s at 0xffffc9000037e000, 00:0f:b5:fb:c3:a6, XID 04000000 IRQ 21
>
> The one that seems to be complaining is the 2nd one.
I'll plug one and see if it went more touchy than usual.
I do not see anything obvious at first sight. Reverting
aee77e4accbeb2c86b1d294cd84fec4a12dde3bd maybe.
--
Ueimor
^ permalink raw reply
* [net-next 7/8] bna: Firmware Image Naming Change
From: Rasesh Mody @ 2012-12-05 23:01 UTC (permalink / raw)
To: davem, netdev; +Cc: adapter_linux_open_src_team, Rasesh Mody
In-Reply-To: <1354748470-26293-1-git-send-email-rmody@brocade.com>
Change details:
Modified the firmware naming convention to contain the firmware image
version (3.1.0.0). The new convention is <firmware-image>-<firmware-version>.bin
The change will enforce loading only compatible firmware with this driver and
also avoid over-writing the old firmware image in-order to load new version
driver as the firmware names used to be the same.
Signed-off-by: Rasesh Mody <rmody@brocade.com>
---
drivers/net/ethernet/brocade/bna/cna.h | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/brocade/bna/cna.h b/drivers/net/ethernet/brocade/bna/cna.h
index 32e8f17..14ca931 100644
--- a/drivers/net/ethernet/brocade/bna/cna.h
+++ b/drivers/net/ethernet/brocade/bna/cna.h
@@ -37,8 +37,8 @@
extern char bfa_version[];
-#define CNA_FW_FILE_CT "ctfw.bin"
-#define CNA_FW_FILE_CT2 "ct2fw.bin"
+#define CNA_FW_FILE_CT "ctfw-3.1.0.0.bin"
+#define CNA_FW_FILE_CT2 "ct2fw-3.1.0.0.bin"
#define FC_SYMNAME_MAX 256 /*!< max name server symbolic name size */
#pragma pack(1)
--
1.7.1
^ permalink raw reply related
* [net-next 1/8] bna: Code Cleanup and Enhancements
From: Rasesh Mody @ 2012-12-05 23:01 UTC (permalink / raw)
To: davem, netdev; +Cc: adapter_linux_open_src_team, Rasesh Mody
In-Reply-To: <1354748470-26293-1-git-send-email-rmody@brocade.com>
Change details:
- Remove unnecessary prefetch
- Simplify checking & comparison of CQ flags
- Dereference & store unmap_array, unmap_cons & current unmap_array
element only once
- Make structures tx_config & rx_config cache line aligned.
Signed-off-by: Rasesh Mody <rmody@brocade.com>
---
drivers/net/ethernet/brocade/bna/bnad.c | 45 ++++++++++++++++++++-----------
drivers/net/ethernet/brocade/bna/bnad.h | 4 +-
2 files changed, 31 insertions(+), 18 deletions(-)
diff --git a/drivers/net/ethernet/brocade/bna/bnad.c b/drivers/net/ethernet/brocade/bna/bnad.c
index b441f33..b7fb391 100644
--- a/drivers/net/ethernet/brocade/bna/bnad.c
+++ b/drivers/net/ethernet/brocade/bna/bnad.c
@@ -210,7 +210,6 @@ bnad_txcmpl_process(struct bnad *bnad,
unmap_array = unmap_q->unmap_array;
unmap_cons = unmap_q->consumer_index;
- prefetch(&unmap_array[unmap_cons + 1]);
while (wis) {
skb = unmap_array[unmap_cons].skb;
@@ -383,6 +382,20 @@ bnad_refill_rxq(struct bnad *bnad, struct bna_rcb *rcb)
}
}
+#define flags_cksum_prot_mask (BNA_CQ_EF_IPV4 | BNA_CQ_EF_L3_CKSUM_OK | \
+ BNA_CQ_EF_IPV6 | \
+ BNA_CQ_EF_TCP | BNA_CQ_EF_UDP | \
+ BNA_CQ_EF_L4_CKSUM_OK)
+
+#define flags_tcp4 (BNA_CQ_EF_IPV4 | BNA_CQ_EF_L3_CKSUM_OK | \
+ BNA_CQ_EF_TCP | BNA_CQ_EF_L4_CKSUM_OK)
+#define flags_tcp6 (BNA_CQ_EF_IPV6 | \
+ BNA_CQ_EF_TCP | BNA_CQ_EF_L4_CKSUM_OK)
+#define flags_udp4 (BNA_CQ_EF_IPV4 | BNA_CQ_EF_L3_CKSUM_OK | \
+ BNA_CQ_EF_UDP | BNA_CQ_EF_L4_CKSUM_OK)
+#define flags_udp6 (BNA_CQ_EF_IPV6 | \
+ BNA_CQ_EF_UDP | BNA_CQ_EF_L4_CKSUM_OK)
+
static u32
bnad_cq_process(struct bnad *bnad, struct bna_ccb *ccb, int budget)
{
@@ -390,15 +403,12 @@ bnad_cq_process(struct bnad *bnad, struct bna_ccb *ccb, int budget)
struct bna_rcb *rcb = NULL;
unsigned int wi_range, packets = 0, wis = 0;
struct bnad_unmap_q *unmap_q;
- struct bnad_skb_unmap *unmap_array;
+ struct bnad_skb_unmap *unmap_array, *curr_ua;
struct sk_buff *skb;
- u32 flags, unmap_cons;
+ u32 flags, unmap_cons, masked_flags;
struct bna_pkt_rate *pkt_rt = &ccb->pkt_rate;
struct bnad_rx_ctrl *rx_ctrl = (struct bnad_rx_ctrl *)(ccb->ctrl);
- if (!test_bit(BNAD_RXQ_STARTED, &ccb->rcb[0]->flags))
- return 0;
-
prefetch(bnad->netdev);
BNA_CQ_QPGE_PTR_GET(ccb->producer_index, ccb->sw_qpt, cmpl,
wi_range);
@@ -416,12 +426,13 @@ bnad_cq_process(struct bnad *bnad, struct bna_ccb *ccb, int budget)
unmap_array = unmap_q->unmap_array;
unmap_cons = unmap_q->consumer_index;
- skb = unmap_array[unmap_cons].skb;
- BUG_ON(!(skb));
- unmap_array[unmap_cons].skb = NULL;
+ curr_ua = &unmap_array[unmap_cons];
+
+ skb = curr_ua->skb;
+ BUG_ON(!(skb));\
+ curr_ua->skb = NULL;
dma_unmap_single(&bnad->pcidev->dev,
- dma_unmap_addr(&unmap_array[unmap_cons],
- dma_addr),
+ dma_unmap_addr(curr_ua, dma_addr),
rcb->rxq->buffer_size,
DMA_FROM_DEVICE);
BNA_QE_INDX_ADD(unmap_q->consumer_index, 1, unmap_q->q_depth);
@@ -452,13 +463,15 @@ bnad_cq_process(struct bnad *bnad, struct bna_ccb *ccb, int budget)
}
skb_put(skb, ntohs(cmpl->length));
+
+ masked_flags = flags & flags_cksum_prot_mask;
+
if (likely
((bnad->netdev->features & NETIF_F_RXCSUM) &&
- (((flags & BNA_CQ_EF_IPV4) &&
- (flags & BNA_CQ_EF_L3_CKSUM_OK)) ||
- (flags & BNA_CQ_EF_IPV6)) &&
- (flags & (BNA_CQ_EF_TCP | BNA_CQ_EF_UDP)) &&
- (flags & BNA_CQ_EF_L4_CKSUM_OK)))
+ ((masked_flags == flags_tcp4) ||
+ (masked_flags == flags_udp4) ||
+ (masked_flags == flags_tcp6) ||
+ (masked_flags == flags_udp6))))
skb->ip_summed = CHECKSUM_UNNECESSARY;
else
skb_checksum_none_assert(skb);
diff --git a/drivers/net/ethernet/brocade/bna/bnad.h b/drivers/net/ethernet/brocade/bna/bnad.h
index d783392..65fe74e 100644
--- a/drivers/net/ethernet/brocade/bna/bnad.h
+++ b/drivers/net/ethernet/brocade/bna/bnad.h
@@ -284,8 +284,8 @@ struct bnad {
u8 tx_coalescing_timeo;
u8 rx_coalescing_timeo;
- struct bna_rx_config rx_config[BNAD_MAX_RX];
- struct bna_tx_config tx_config[BNAD_MAX_TX];
+ struct bna_rx_config rx_config[BNAD_MAX_RX]____cacheline_aligned;
+ struct bna_tx_config tx_config[BNAD_MAX_TX]____cacheline_aligned;
void __iomem *bar0; /* BAR0 address */
--
1.7.1
^ permalink raw reply related
* [net-next 3/8] bna: TX Intr Coalescing Fix
From: Rasesh Mody @ 2012-12-05 23:01 UTC (permalink / raw)
To: davem, netdev; +Cc: adapter_linux_open_src_team, Rasesh Mody
In-Reply-To: <1354748470-26293-1-git-send-email-rmody@brocade.com>
Change Details:
For Tx IB, IPM was enabled with inter_pkt_timeo of 0. This caused the
Tx IB not to generate interrupt till inter_pkt_count of packets have been
received. Correct definition for BFI_TX_INTERPKT_TIMEO & BFI_TX_INTERPKT_COUNT
Signed-off-by: Rasesh Mody <rmody@brocade.com>
---
drivers/net/ethernet/brocade/bna/bna_hw_defs.h | 3 ++-
drivers/net/ethernet/brocade/bna/bna_tx_rx.c | 2 +-
2 files changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/brocade/bna/bna_hw_defs.h b/drivers/net/ethernet/brocade/bna/bna_hw_defs.h
index b8c4e21..af3f7bb 100644
--- a/drivers/net/ethernet/brocade/bna/bna_hw_defs.h
+++ b/drivers/net/ethernet/brocade/bna/bna_hw_defs.h
@@ -46,7 +46,8 @@
#define BFI_MAX_INTERPKT_COUNT 0xFF
#define BFI_MAX_INTERPKT_TIMEO 0xF /* in 0.5us units */
#define BFI_TX_COALESCING_TIMEO 20 /* 20 * 5 = 100us */
-#define BFI_TX_INTERPKT_COUNT 32
+#define BFI_TX_INTERPKT_COUNT 12 /* Pkt Cnt = 12 */
+#define BFI_TX_INTERPKT_TIMEO 15 /* 15 * 0.5 = 7.5us */
#define BFI_RX_COALESCING_TIMEO 12 /* 12 * 5 = 60us */
#define BFI_RX_INTERPKT_COUNT 6 /* Pkt Cnt = 6 */
#define BFI_RX_INTERPKT_TIMEO 3 /* 3 * 0.5 = 1.5us */
diff --git a/drivers/net/ethernet/brocade/bna/bna_tx_rx.c b/drivers/net/ethernet/brocade/bna/bna_tx_rx.c
index bb5467b..4df6d4b 100644
--- a/drivers/net/ethernet/brocade/bna/bna_tx_rx.c
+++ b/drivers/net/ethernet/brocade/bna/bna_tx_rx.c
@@ -3569,7 +3569,7 @@ bna_tx_create(struct bna *bna, struct bnad *bnad,
if (intr_info->intr_type == BNA_INTR_T_INTX)
txq->ib.intr_vector = (1 << txq->ib.intr_vector);
txq->ib.coalescing_timeo = tx_cfg->coalescing_timeo;
- txq->ib.interpkt_timeo = 0; /* Not used */
+ txq->ib.interpkt_timeo = BFI_TX_INTERPKT_TIMEO;
txq->ib.interpkt_count = BFI_TX_INTERPKT_COUNT;
/* TCB */
--
1.7.1
^ permalink raw reply related
* [net-next 4/8] bna: Rx Page Based Allocation
From: Rasesh Mody @ 2012-12-05 23:01 UTC (permalink / raw)
To: davem, netdev; +Cc: adapter_linux_open_src_team, Rasesh Mody
In-Reply-To: <1354748470-26293-1-git-send-email-rmody@brocade.com>
Change Details:
Enhanced support for GRO. Page-base allocation method for Rx buffers is
used in GRO. Skb allocation has been removed in Rx path to use always warm-cache
skbs provided by napi_get_frags.
Signed-off-by: Rasesh Mody <rmody@brocade.com>
---
drivers/net/ethernet/brocade/bna/bnad.c | 318 ++++++++++++++++++++++++------
drivers/net/ethernet/brocade/bna/bnad.h | 19 ++
2 files changed, 273 insertions(+), 64 deletions(-)
diff --git a/drivers/net/ethernet/brocade/bna/bnad.c b/drivers/net/ethernet/brocade/bna/bnad.c
index da5470a..22d52ef 100644
--- a/drivers/net/ethernet/brocade/bna/bnad.c
+++ b/drivers/net/ethernet/brocade/bna/bnad.c
@@ -266,53 +266,181 @@ bnad_msix_tx(int irq, void *data)
return IRQ_HANDLED;
}
+static inline void
+bnad_rxq_alloc_uninit(struct bnad *bnad, struct bna_rcb *rcb)
+{
+ struct bnad_rx_unmap_q *unmap_q = rcb->unmap_q;
+
+ unmap_q->reuse_pi = -1;
+ unmap_q->alloc_order = -1;
+ unmap_q->map_size = 0;
+ unmap_q->type = BNAD_RXBUF_NONE;
+}
+
+/* Default is page-based allocation. Multi-buffer support - TBD */
+static int
+bnad_rxq_alloc_init(struct bnad *bnad, struct bna_rcb *rcb)
+{
+ struct bnad_rx_unmap_q *unmap_q = rcb->unmap_q;
+ int mtu, order;
+
+ bnad_rxq_alloc_uninit(bnad, rcb);
+
+ mtu = bna_enet_mtu_get(&bnad->bna.enet);
+ order = get_order(mtu);
+
+ if (bna_is_small_rxq(rcb->id)) {
+ unmap_q->alloc_order = 0;
+ unmap_q->map_size = rcb->rxq->buffer_size;
+ } else {
+ unmap_q->alloc_order = order;
+ unmap_q->map_size =
+ (rcb->rxq->buffer_size > 2048) ?
+ PAGE_SIZE << order : 2048;
+ }
+
+ BUG_ON(((PAGE_SIZE << order) % unmap_q->map_size));
+
+ unmap_q->type = BNAD_RXBUF_PAGE;
+
+ return 0;
+}
+
+static inline void
+bnad_rxq_cleanup_page(struct bnad *bnad, struct bnad_rx_unmap *unmap)
+{
+ if (!unmap->page)
+ return;
+
+ dma_unmap_page(&bnad->pcidev->dev,
+ dma_unmap_addr(&unmap->vector, dma_addr),
+ unmap->vector.len, DMA_FROM_DEVICE);
+ put_page(unmap->page);
+ unmap->page = NULL;
+ dma_unmap_addr_set(&unmap->vector, dma_addr, 0);
+ unmap->vector.len = 0;
+}
+
+static inline void
+bnad_rxq_cleanup_skb(struct bnad *bnad, struct bnad_rx_unmap *unmap)
+{
+ if (!unmap->skb)
+ return;
+
+ dma_unmap_single(&bnad->pcidev->dev,
+ dma_unmap_addr(&unmap->vector, dma_addr),
+ unmap->vector.len, DMA_FROM_DEVICE);
+ dev_kfree_skb_any(unmap->skb);
+ unmap->skb = NULL;
+ dma_unmap_addr_set(&unmap->vector, dma_addr, 0);
+ unmap->vector.len = 0;
+}
+
static void
bnad_rxq_cleanup(struct bnad *bnad, struct bna_rcb *rcb)
{
- struct bnad_rx_unmap *unmap_q = rcb->unmap_q;
- struct sk_buff *skb;
+ struct bnad_rx_unmap_q *unmap_q = rcb->unmap_q;
int i;
for (i = 0; i < rcb->q_depth; i++) {
- struct bnad_rx_unmap *unmap = &unmap_q[i];
+ struct bnad_rx_unmap *unmap = &unmap_q->unmap[i];
- skb = unmap->skb;
- if (!skb)
- continue;
+ if (BNAD_RXBUF_IS_PAGE(unmap_q->type))
+ bnad_rxq_cleanup_page(bnad, unmap);
+ else
+ bnad_rxq_cleanup_skb(bnad, unmap);
+ }
+ bnad_rxq_alloc_uninit(bnad, rcb);
+}
- unmap->skb = NULL;
- dma_unmap_single(&bnad->pcidev->dev,
- dma_unmap_addr(&unmap->vector, dma_addr),
- unmap->vector.len, DMA_FROM_DEVICE);
- dma_unmap_addr_set(&unmap->vector, dma_addr, 0);
- unmap->vector.len = 0;
- dev_kfree_skb_any(skb);
+static u32
+bnad_rxq_refill_page(struct bnad *bnad, struct bna_rcb *rcb, u32 nalloc)
+{
+ u32 alloced, prod, q_depth;
+ struct bnad_rx_unmap_q *unmap_q = rcb->unmap_q;
+ struct bnad_rx_unmap *unmap, *prev;
+ struct bna_rxq_entry *rxent;
+ struct page *page;
+ u32 page_offset, alloc_size;
+ dma_addr_t dma_addr;
+
+ prod = rcb->producer_index;
+ q_depth = rcb->q_depth;
+
+ alloc_size = PAGE_SIZE << unmap_q->alloc_order;
+ alloced = 0;
+
+ while (nalloc--) {
+ unmap = &unmap_q->unmap[prod];
+
+ if (unmap_q->reuse_pi < 0) {
+ page = alloc_pages(GFP_ATOMIC | __GFP_COMP,
+ unmap_q->alloc_order);
+ page_offset = 0;
+ } else {
+ prev = &unmap_q->unmap[unmap_q->reuse_pi];
+ page = prev->page;
+ page_offset = prev->page_offset + unmap_q->map_size;
+ get_page(page);
+ }
+
+ if (unlikely(!page)) {
+ BNAD_UPDATE_CTR(bnad, rxbuf_alloc_failed);
+ rcb->rxq->rxbuf_alloc_failed++;
+ goto finishing;
+ }
+
+ dma_addr = dma_map_page(&bnad->pcidev->dev, page, page_offset,
+ unmap_q->map_size, DMA_FROM_DEVICE);
+
+ unmap->page = page;
+ unmap->page_offset = page_offset;
+ dma_unmap_addr_set(&unmap->vector, dma_addr, dma_addr);
+ unmap->vector.len = unmap_q->map_size;
+ page_offset += unmap_q->map_size;
+
+ if (page_offset < alloc_size)
+ unmap_q->reuse_pi = prod;
+ else
+ unmap_q->reuse_pi = -1;
+
+ rxent = &((struct bna_rxq_entry *)rcb->sw_q)[prod];
+ BNA_SET_DMA_ADDR(dma_addr, &rxent->host_addr);
+ BNA_QE_INDX_INC(prod, q_depth);
+ alloced++;
}
+
+finishing:
+ if (likely(alloced)) {
+ rcb->producer_index = prod;
+ smp_mb();
+ if (likely(test_bit(BNAD_RXQ_POST_OK, &rcb->flags)))
+ bna_rxq_prod_indx_doorbell(rcb);
+ }
+
+ return alloced;
}
-/* Allocate and post BNAD_RXQ_REFILL_THRESHOLD_SHIFT buffers at a time */
-static void
-bnad_rxq_post(struct bnad *bnad, struct bna_rcb *rcb)
+static u32
+bnad_rxq_refill_skb(struct bnad *bnad, struct bna_rcb *rcb, u32 nalloc)
{
- u32 to_alloc, alloced, prod, q_depth, buff_sz;
- struct bnad_rx_unmap *unmap_q = rcb->unmap_q;
+ u32 alloced, prod, q_depth, buff_sz;
+ struct bnad_rx_unmap_q *unmap_q = rcb->unmap_q;
struct bnad_rx_unmap *unmap;
struct bna_rxq_entry *rxent;
struct sk_buff *skb;
dma_addr_t dma_addr;
buff_sz = rcb->rxq->buffer_size;
- alloced = 0;
- to_alloc = BNA_QE_FREE_CNT(rcb, rcb->q_depth);
- if (!(to_alloc >> BNAD_RXQ_REFILL_THRESHOLD_SHIFT))
- return;
-
prod = rcb->producer_index;
q_depth = rcb->q_depth;
- while (to_alloc--) {
- skb = netdev_alloc_skb_ip_align(bnad->netdev,
- buff_sz);
+ alloced = 0;
+ while (nalloc--) {
+ unmap = &unmap_q->unmap[prod];
+
+ skb = netdev_alloc_skb_ip_align(bnad->netdev, buff_sz);
+
if (unlikely(!skb)) {
BNAD_UPDATE_CTR(bnad, rxbuf_alloc_failed);
rcb->rxq->rxbuf_alloc_failed++;
@@ -320,13 +448,13 @@ bnad_rxq_post(struct bnad *bnad, struct bna_rcb *rcb)
}
dma_addr = dma_map_single(&bnad->pcidev->dev, skb->data,
buff_sz, DMA_FROM_DEVICE);
- rxent = &((struct bna_rxq_entry *)rcb->sw_q)[prod];
- BNA_SET_DMA_ADDR(dma_addr, &rxent->host_addr);
- unmap = &unmap_q[prod];
unmap->skb = skb;
dma_unmap_addr_set(&unmap->vector, dma_addr, dma_addr);
unmap->vector.len = buff_sz;
+
+ rxent = &((struct bna_rxq_entry *)rcb->sw_q)[prod];
+ BNA_SET_DMA_ADDR(dma_addr, &rxent->host_addr);
BNA_QE_INDX_INC(prod, q_depth);
alloced++;
}
@@ -338,6 +466,24 @@ finishing:
if (likely(test_bit(BNAD_RXQ_POST_OK, &rcb->flags)))
bna_rxq_prod_indx_doorbell(rcb);
}
+
+ return alloced;
+}
+
+static inline void
+bnad_rxq_post(struct bnad *bnad, struct bna_rcb *rcb)
+{
+ struct bnad_rx_unmap_q *unmap_q = rcb->unmap_q;
+ u32 to_alloc;
+
+ to_alloc = BNA_QE_FREE_CNT(rcb, rcb->q_depth);
+ if (!(to_alloc >> BNAD_RXQ_REFILL_THRESHOLD_SHIFT))
+ return;
+
+ if (BNAD_RXBUF_IS_PAGE(unmap_q->type))
+ bnad_rxq_refill_page(bnad, rcb, to_alloc);
+ else
+ bnad_rxq_refill_skb(bnad, rcb, to_alloc);
}
#define flags_cksum_prot_mask (BNA_CQ_EF_IPV4 | BNA_CQ_EF_L3_CKSUM_OK | \
@@ -354,17 +500,62 @@ finishing:
#define flags_udp6 (BNA_CQ_EF_IPV6 | \
BNA_CQ_EF_UDP | BNA_CQ_EF_L4_CKSUM_OK)
+static inline struct sk_buff *
+bnad_cq_prepare_skb(struct bnad_rx_ctrl *rx_ctrl,
+ struct bnad_rx_unmap_q *unmap_q,
+ struct bnad_rx_unmap *unmap,
+ u32 length, u32 flags)
+{
+ struct bnad *bnad = rx_ctrl->bnad;
+ struct sk_buff *skb;
+
+ if (BNAD_RXBUF_IS_PAGE(unmap_q->type)) {
+ skb = napi_get_frags(&rx_ctrl->napi);
+ if (unlikely(!skb))
+ return NULL;
+
+ dma_unmap_page(&bnad->pcidev->dev,
+ dma_unmap_addr(&unmap->vector, dma_addr),
+ unmap->vector.len, DMA_FROM_DEVICE);
+ skb_fill_page_desc(skb, skb_shinfo(skb)->nr_frags,
+ unmap->page, unmap->page_offset, length);
+ skb->len += length;
+ skb->data_len += length;
+ skb->truesize += length;
+
+ unmap->page = NULL;
+ unmap->vector.len = 0;
+
+ return skb;
+ }
+
+ skb = unmap->skb;
+ BUG_ON(!skb);
+
+ dma_unmap_single(&bnad->pcidev->dev,
+ dma_unmap_addr(&unmap->vector, dma_addr),
+ unmap->vector.len, DMA_FROM_DEVICE);
+
+ skb_put(skb, length);
+
+ skb->protocol = eth_type_trans(skb, bnad->netdev);
+
+ unmap->skb = NULL;
+ unmap->vector.len = 0;
+ return skb;
+}
+
static u32
bnad_cq_process(struct bnad *bnad, struct bna_ccb *ccb, int budget)
{
- struct bna_cq_entry *cq, *cmpl, *next_cmpl;
+ struct bna_cq_entry *cq, *cmpl;
struct bna_rcb *rcb = NULL;
- struct bnad_rx_unmap *unmap_q, *unmap;
- unsigned int packets = 0;
+ struct bnad_rx_unmap_q *unmap_q;
+ struct bnad_rx_unmap *unmap;
struct sk_buff *skb;
- u32 flags, masked_flags;
struct bna_pkt_rate *pkt_rt = &ccb->pkt_rate;
- struct bnad_rx_ctrl *rx_ctrl = (struct bnad_rx_ctrl *)(ccb->ctrl);
+ struct bnad_rx_ctrl *rx_ctrl = ccb->ctrl;
+ u32 packets = 0, length = 0, flags, masked_flags;
prefetch(bnad->netdev);
@@ -373,6 +564,8 @@ bnad_cq_process(struct bnad *bnad, struct bna_ccb *ccb, int budget)
while (cmpl->valid && (packets < budget)) {
packets++;
+ flags = ntohl(cmpl->flags);
+ length = ntohs(cmpl->length);
BNA_UPDATE_PKT_CNT(pkt_rt, ntohs(cmpl->length));
if (bna_is_small_rxq(cmpl->rxq_id))
@@ -381,32 +574,25 @@ bnad_cq_process(struct bnad *bnad, struct bna_ccb *ccb, int budget)
rcb = ccb->rcb[0];
unmap_q = rcb->unmap_q;
- unmap = &unmap_q[rcb->consumer_index];
+ unmap = &unmap_q->unmap[rcb->consumer_index];
- skb = unmap->skb;
- BUG_ON(!(skb));
- unmap->skb = NULL;
- dma_unmap_single(&bnad->pcidev->dev,
- dma_unmap_addr(&unmap->vector, dma_addr),
- unmap->vector.len, DMA_FROM_DEVICE);
- unmap->vector.len = 0;
- BNA_QE_INDX_INC(rcb->consumer_index, rcb->q_depth);
- BNA_QE_INDX_INC(ccb->producer_index, ccb->q_depth);
- next_cmpl = &cq[ccb->producer_index];
+ if (unlikely(flags & (BNA_CQ_EF_MAC_ERROR |
+ BNA_CQ_EF_FCS_ERROR |
+ BNA_CQ_EF_TOO_LONG))) {
+ if (BNAD_RXBUF_IS_PAGE(unmap_q->type))
+ bnad_rxq_cleanup_page(bnad, unmap);
+ else
+ bnad_rxq_cleanup_skb(bnad, unmap);
- prefetch(next_cmpl);
-
- flags = ntohl(cmpl->flags);
- if (unlikely
- (flags &
- (BNA_CQ_EF_MAC_ERROR | BNA_CQ_EF_FCS_ERROR |
- BNA_CQ_EF_TOO_LONG))) {
- dev_kfree_skb_any(skb);
rcb->rxq->rx_packets_with_error++;
goto next;
}
- skb_put(skb, ntohs(cmpl->length));
+ skb = bnad_cq_prepare_skb(ccb->ctrl, unmap_q, unmap,
+ length, flags);
+
+ if (unlikely(!skb))
+ break;
masked_flags = flags & flags_cksum_prot_mask;
@@ -421,22 +607,24 @@ bnad_cq_process(struct bnad *bnad, struct bna_ccb *ccb, int budget)
skb_checksum_none_assert(skb);
rcb->rxq->rx_packets++;
- rcb->rxq->rx_bytes += skb->len;
- skb->protocol = eth_type_trans(skb, bnad->netdev);
+ rcb->rxq->rx_bytes += length;
if (flags & BNA_CQ_EF_VLAN)
__vlan_hwaccel_put_tag(skb, ntohs(cmpl->vlan_tag));
- if (skb->ip_summed == CHECKSUM_UNNECESSARY)
- napi_gro_receive(&rx_ctrl->napi, skb);
+ if (BNAD_RXBUF_IS_PAGE(unmap_q->type))
+ napi_gro_frags(&rx_ctrl->napi);
else
netif_receive_skb(skb);
next:
cmpl->valid = 0;
- cmpl = next_cmpl;
+ BNA_QE_INDX_INC(rcb->consumer_index, rcb->q_depth);
+ BNA_QE_INDX_INC(ccb->producer_index, ccb->q_depth);
+ cmpl = &cq[ccb->producer_index];
}
+ napi_gro_flush(&rx_ctrl->napi, false);
if (likely(test_bit(BNAD_RXQ_STARTED, &ccb->rcb[0]->flags)))
bna_ib_ack_disable_irq(ccb->i_dbell, packets);
@@ -956,8 +1144,7 @@ bnad_cb_rx_post(struct bnad *bnad, struct bna_rx *rx)
struct bna_ccb *ccb;
struct bna_rcb *rcb;
struct bnad_rx_ctrl *rx_ctrl;
- int i;
- int j;
+ int i, j;
for (i = 0; i < BNAD_MAX_RXP_PER_RX; i++) {
rx_ctrl = &rx_info->rx_ctrl[i];
@@ -972,6 +1159,7 @@ bnad_cb_rx_post(struct bnad *bnad, struct bna_rx *rx)
if (!rcb)
continue;
+ bnad_rxq_alloc_init(bnad, rcb);
set_bit(BNAD_RXQ_STARTED, &rcb->flags);
set_bit(BNAD_RXQ_POST_OK, &rcb->flags);
bnad_rxq_post(bnad, rcb);
@@ -1861,9 +2049,11 @@ bnad_setup_rx(struct bnad *bnad, u32 rx_id)
/* Fill Unmap Q memory requirements */
BNAD_FILL_UNMAPQ_MEM_REQ(&res_info[BNA_RX_RES_MEM_T_UNMAPQ],
- rx_config->num_paths + ((rx_config->rxp_type == BNA_RXP_SINGLE)
- ? 0 : rx_config->num_paths), (bnad->rxq_depth *
- sizeof(struct bnad_rx_unmap)));
+ rx_config->num_paths +
+ ((rx_config->rxp_type == BNA_RXP_SINGLE) ?
+ 0 : rx_config->num_paths),
+ ((bnad->rxq_depth * sizeof(struct bnad_rx_unmap)) +
+ sizeof(struct bnad_rx_unmap_q)));
/* Allocate resource */
err = bnad_rx_res_alloc(bnad, res_info, rx_id);
diff --git a/drivers/net/ethernet/brocade/bna/bnad.h b/drivers/net/ethernet/brocade/bna/bnad.h
index db132c9..134d534 100644
--- a/drivers/net/ethernet/brocade/bna/bnad.h
+++ b/drivers/net/ethernet/brocade/bna/bnad.h
@@ -233,10 +233,29 @@ struct bnad_rx_vector {
};
struct bnad_rx_unmap {
+ struct page *page;
+ u32 page_offset;
struct sk_buff *skb;
struct bnad_rx_vector vector;
};
+enum bnad_rxbuf_type {
+ BNAD_RXBUF_NONE = 0,
+ BNAD_RXBUF_SKB = 1,
+ BNAD_RXBUF_PAGE = 2,
+ BNAD_RXBUF_MULTI = 3
+};
+
+#define BNAD_RXBUF_IS_PAGE(_type) ((_type) == BNAD_RXBUF_PAGE)
+
+struct bnad_rx_unmap_q {
+ int reuse_pi;
+ int alloc_order;
+ u32 map_size;
+ enum bnad_rxbuf_type type;
+ struct bnad_rx_unmap unmap[0];
+};
+
/* Bit mask values for bnad->cfg_flags */
#define BNAD_CF_DIM_ENABLED 0x01 /* DIM */
#define BNAD_CF_PROMISC 0x02
--
1.7.1
^ permalink raw reply related
* [net-next 8/8] bna: Driver Version Updated to 3.1.2.1
From: Rasesh Mody @ 2012-12-05 23:01 UTC (permalink / raw)
To: davem, netdev; +Cc: adapter_linux_open_src_team, Rasesh Mody
In-Reply-To: <1354748470-26293-1-git-send-email-rmody@brocade.com>
Signed-off-by: Rasesh Mody <rmody@brocade.com>
---
drivers/net/ethernet/brocade/bna/bnad.h | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/net/ethernet/brocade/bna/bnad.h b/drivers/net/ethernet/brocade/bna/bnad.h
index 134d534..72ba586 100644
--- a/drivers/net/ethernet/brocade/bna/bnad.h
+++ b/drivers/net/ethernet/brocade/bna/bnad.h
@@ -71,7 +71,7 @@ struct bnad_rx_ctrl {
#define BNAD_NAME "bna"
#define BNAD_NAME_LEN 64
-#define BNAD_VERSION "3.0.23.0"
+#define BNAD_VERSION "3.1.2.1"
#define BNAD_MAILBOX_MSIX_INDEX 0
#define BNAD_MAILBOX_MSIX_VECTORS 1
--
1.7.1
^ permalink raw reply related
* [net-next 2/8] bna: Tx and Rx Optimizations
From: Rasesh Mody @ 2012-12-05 23:01 UTC (permalink / raw)
To: davem, netdev; +Cc: adapter_linux_open_src_team, Rasesh Mody
In-Reply-To: <1354748470-26293-1-git-send-email-rmody@brocade.com>
Change details:
- Have contiguous queue pages for TxQ, RxQ and CQ. Data structure and
QPT changes related to contiguous queue pages
- Optimized Tx and Rx unmap structures. Tx and Rx fast path changes due to
unmap data structure changes
- Re-factored Tx and Rx fastpath routines as per the new queue data structures
- Implemented bnad_txq_wi_prepare() to program the opcode, flags, frame_len
and num_vectors in the work item
- Reduced Max TxQ and RxQ depth to 2048 while default value for Tx/Rx queue
depth is unaltered (512)
Signed-off-by: Rasesh Mody <rmody@brocade.com>
---
drivers/net/ethernet/brocade/bna/bna.h | 7 +
drivers/net/ethernet/brocade/bna/bna_tx_rx.c | 109 +++--
drivers/net/ethernet/brocade/bna/bna_types.h | 9 +-
drivers/net/ethernet/brocade/bna/bnad.c | 690 +++++++++++---------------
drivers/net/ethernet/brocade/bna/bnad.h | 41 +-
5 files changed, 386 insertions(+), 470 deletions(-)
diff --git a/drivers/net/ethernet/brocade/bna/bna.h b/drivers/net/ethernet/brocade/bna/bna.h
index ede532b..ccd4268 100644
--- a/drivers/net/ethernet/brocade/bna/bna.h
+++ b/drivers/net/ethernet/brocade/bna/bna.h
@@ -138,6 +138,13 @@ do { \
#define BNA_QE_INDX_ADD(_qe_idx, _qe_num, _q_depth) \
((_qe_idx) = ((_qe_idx) + (_qe_num)) & ((_q_depth) - 1))
+#define BNA_QE_INDX_INC(_idx, _q_depth) \
+do { \
+ (_idx)++; \
+ if ((_idx) == (_q_depth)) \
+ (_idx) = 0; \
+} while (0)
+
#define BNA_Q_INDEX_CHANGE(_old_idx, _updated_idx, _q_depth) \
(((_updated_idx) - (_old_idx)) & ((_q_depth) - 1))
diff --git a/drivers/net/ethernet/brocade/bna/bna_tx_rx.c b/drivers/net/ethernet/brocade/bna/bna_tx_rx.c
index 71144b3..bb5467b 100644
--- a/drivers/net/ethernet/brocade/bna/bna_tx_rx.c
+++ b/drivers/net/ethernet/brocade/bna/bna_tx_rx.c
@@ -1908,6 +1908,9 @@ bna_rxq_qpt_setup(struct bna_rxq *rxq,
struct bna_mem_descr *swqpt_mem,
struct bna_mem_descr *page_mem)
{
+ u8 *kva;
+ u64 dma;
+ struct bna_dma_addr bna_dma;
int i;
rxq->qpt.hw_qpt_ptr.lsb = qpt_mem->dma.lsb;
@@ -1917,13 +1920,21 @@ bna_rxq_qpt_setup(struct bna_rxq *rxq,
rxq->qpt.page_size = page_size;
rxq->rcb->sw_qpt = (void **) swqpt_mem->kva;
+ rxq->rcb->sw_q = page_mem->kva;
+
+ kva = page_mem->kva;
+ BNA_GET_DMA_ADDR(&page_mem->dma, dma);
for (i = 0; i < rxq->qpt.page_count; i++) {
- rxq->rcb->sw_qpt[i] = page_mem[i].kva;
+ rxq->rcb->sw_qpt[i] = kva;
+ kva += PAGE_SIZE;
+
+ BNA_SET_DMA_ADDR(dma, &bna_dma);
((struct bna_dma_addr *)rxq->qpt.kv_qpt_ptr)[i].lsb =
- page_mem[i].dma.lsb;
+ bna_dma.lsb;
((struct bna_dma_addr *)rxq->qpt.kv_qpt_ptr)[i].msb =
- page_mem[i].dma.msb;
+ bna_dma.msb;
+ dma += PAGE_SIZE;
}
}
@@ -1935,6 +1946,9 @@ bna_rxp_cqpt_setup(struct bna_rxp *rxp,
struct bna_mem_descr *swqpt_mem,
struct bna_mem_descr *page_mem)
{
+ u8 *kva;
+ u64 dma;
+ struct bna_dma_addr bna_dma;
int i;
rxp->cq.qpt.hw_qpt_ptr.lsb = qpt_mem->dma.lsb;
@@ -1944,14 +1958,21 @@ bna_rxp_cqpt_setup(struct bna_rxp *rxp,
rxp->cq.qpt.page_size = page_size;
rxp->cq.ccb->sw_qpt = (void **) swqpt_mem->kva;
+ rxp->cq.ccb->sw_q = page_mem->kva;
+
+ kva = page_mem->kva;
+ BNA_GET_DMA_ADDR(&page_mem->dma, dma);
for (i = 0; i < rxp->cq.qpt.page_count; i++) {
- rxp->cq.ccb->sw_qpt[i] = page_mem[i].kva;
+ rxp->cq.ccb->sw_qpt[i] = kva;
+ kva += PAGE_SIZE;
+ BNA_SET_DMA_ADDR(dma, &bna_dma);
((struct bna_dma_addr *)rxp->cq.qpt.kv_qpt_ptr)[i].lsb =
- page_mem[i].dma.lsb;
+ bna_dma.lsb;
((struct bna_dma_addr *)rxp->cq.qpt.kv_qpt_ptr)[i].msb =
- page_mem[i].dma.msb;
+ bna_dma.msb;
+ dma += PAGE_SIZE;
}
}
@@ -2250,8 +2271,8 @@ bna_rx_res_req(struct bna_rx_config *q_cfg, struct bna_res_info *res_info)
res_info[BNA_RX_RES_MEM_T_CQPT_PAGE].res_type = BNA_RES_T_MEM;
mem_info = &res_info[BNA_RX_RES_MEM_T_CQPT_PAGE].res_u.mem_info;
mem_info->mem_type = BNA_MEM_T_DMA;
- mem_info->len = PAGE_SIZE;
- mem_info->num = cpage_count * q_cfg->num_paths;
+ mem_info->len = PAGE_SIZE * cpage_count;
+ mem_info->num = q_cfg->num_paths;
res_info[BNA_RX_RES_MEM_T_DQPT].res_type = BNA_RES_T_MEM;
mem_info = &res_info[BNA_RX_RES_MEM_T_DQPT].res_u.mem_info;
@@ -2268,8 +2289,8 @@ bna_rx_res_req(struct bna_rx_config *q_cfg, struct bna_res_info *res_info)
res_info[BNA_RX_RES_MEM_T_DPAGE].res_type = BNA_RES_T_MEM;
mem_info = &res_info[BNA_RX_RES_MEM_T_DPAGE].res_u.mem_info;
mem_info->mem_type = BNA_MEM_T_DMA;
- mem_info->len = PAGE_SIZE;
- mem_info->num = dpage_count * q_cfg->num_paths;
+ mem_info->len = PAGE_SIZE * dpage_count;
+ mem_info->num = q_cfg->num_paths;
res_info[BNA_RX_RES_MEM_T_HQPT].res_type = BNA_RES_T_MEM;
mem_info = &res_info[BNA_RX_RES_MEM_T_HQPT].res_u.mem_info;
@@ -2286,8 +2307,8 @@ bna_rx_res_req(struct bna_rx_config *q_cfg, struct bna_res_info *res_info)
res_info[BNA_RX_RES_MEM_T_HPAGE].res_type = BNA_RES_T_MEM;
mem_info = &res_info[BNA_RX_RES_MEM_T_HPAGE].res_u.mem_info;
mem_info->mem_type = BNA_MEM_T_DMA;
- mem_info->len = (hpage_count ? PAGE_SIZE : 0);
- mem_info->num = (hpage_count ? (hpage_count * q_cfg->num_paths) : 0);
+ mem_info->len = PAGE_SIZE * hpage_count;
+ mem_info->num = (hpage_count ? q_cfg->num_paths : 0);
res_info[BNA_RX_RES_MEM_T_IBIDX].res_type = BNA_RES_T_MEM;
mem_info = &res_info[BNA_RX_RES_MEM_T_IBIDX].res_u.mem_info;
@@ -2332,7 +2353,7 @@ bna_rx_create(struct bna *bna, struct bnad *bnad,
struct bna_mem_descr *dsqpt_mem;
struct bna_mem_descr *hpage_mem;
struct bna_mem_descr *dpage_mem;
- int i, cpage_idx = 0, dpage_idx = 0, hpage_idx = 0;
+ int i;
int dpage_count, hpage_count, rcb_idx;
if (!bna_rx_res_check(rx_mod, rx_cfg))
@@ -2352,14 +2373,14 @@ bna_rx_create(struct bna *bna, struct bnad *bnad,
hpage_mem = &res_info[BNA_RX_RES_MEM_T_HPAGE].res_u.mem_info.mdl[0];
dpage_mem = &res_info[BNA_RX_RES_MEM_T_DPAGE].res_u.mem_info.mdl[0];
- page_count = res_info[BNA_RX_RES_MEM_T_CQPT_PAGE].res_u.mem_info.num /
- rx_cfg->num_paths;
+ page_count = res_info[BNA_RX_RES_MEM_T_CQPT_PAGE].res_u.mem_info.len /
+ PAGE_SIZE;
- dpage_count = res_info[BNA_RX_RES_MEM_T_DPAGE].res_u.mem_info.num /
- rx_cfg->num_paths;
+ dpage_count = res_info[BNA_RX_RES_MEM_T_DPAGE].res_u.mem_info.len /
+ PAGE_SIZE;
- hpage_count = res_info[BNA_RX_RES_MEM_T_HPAGE].res_u.mem_info.num /
- rx_cfg->num_paths;
+ hpage_count = res_info[BNA_RX_RES_MEM_T_HPAGE].res_u.mem_info.len /
+ PAGE_SIZE;
rx = bna_rx_get(rx_mod, rx_cfg->rx_type);
rx->bna = bna;
@@ -2446,10 +2467,7 @@ bna_rx_create(struct bna *bna, struct bnad *bnad,
q0->rx_packets_with_error = q0->rxbuf_alloc_failed = 0;
bna_rxq_qpt_setup(q0, rxp, dpage_count, PAGE_SIZE,
- &dqpt_mem[i], &dsqpt_mem[i], &dpage_mem[dpage_idx]);
- q0->rcb->page_idx = dpage_idx;
- q0->rcb->page_count = dpage_count;
- dpage_idx += dpage_count;
+ &dqpt_mem[i], &dsqpt_mem[i], &dpage_mem[i]);
if (rx->rcb_setup_cbfn)
rx->rcb_setup_cbfn(bnad, q0->rcb);
@@ -2475,10 +2493,7 @@ bna_rx_create(struct bna *bna, struct bnad *bnad,
bna_rxq_qpt_setup(q1, rxp, hpage_count, PAGE_SIZE,
&hqpt_mem[i], &hsqpt_mem[i],
- &hpage_mem[hpage_idx]);
- q1->rcb->page_idx = hpage_idx;
- q1->rcb->page_count = hpage_count;
- hpage_idx += hpage_count;
+ &hpage_mem[i]);
if (rx->rcb_setup_cbfn)
rx->rcb_setup_cbfn(bnad, q1->rcb);
@@ -2510,10 +2525,7 @@ bna_rx_create(struct bna *bna, struct bnad *bnad,
rxp->cq.ccb->id = i;
bna_rxp_cqpt_setup(rxp, page_count, PAGE_SIZE,
- &cqpt_mem[i], &cswqpt_mem[i], &cpage_mem[cpage_idx]);
- rxp->cq.ccb->page_idx = cpage_idx;
- rxp->cq.ccb->page_count = page_count;
- cpage_idx += page_count;
+ &cqpt_mem[i], &cswqpt_mem[i], &cpage_mem[i]);
if (rx->ccb_setup_cbfn)
rx->ccb_setup_cbfn(bnad, rxp->cq.ccb);
@@ -3230,6 +3242,9 @@ bna_txq_qpt_setup(struct bna_txq *txq, int page_count, int page_size,
struct bna_mem_descr *swqpt_mem,
struct bna_mem_descr *page_mem)
{
+ u8 *kva;
+ u64 dma;
+ struct bna_dma_addr bna_dma;
int i;
txq->qpt.hw_qpt_ptr.lsb = qpt_mem->dma.lsb;
@@ -3239,14 +3254,21 @@ bna_txq_qpt_setup(struct bna_txq *txq, int page_count, int page_size,
txq->qpt.page_size = page_size;
txq->tcb->sw_qpt = (void **) swqpt_mem->kva;
+ txq->tcb->sw_q = page_mem->kva;
+
+ kva = page_mem->kva;
+ BNA_GET_DMA_ADDR(&page_mem->dma, dma);
for (i = 0; i < page_count; i++) {
- txq->tcb->sw_qpt[i] = page_mem[i].kva;
+ txq->tcb->sw_qpt[i] = kva;
+ kva += PAGE_SIZE;
+ BNA_SET_DMA_ADDR(dma, &bna_dma);
((struct bna_dma_addr *)txq->qpt.kv_qpt_ptr)[i].lsb =
- page_mem[i].dma.lsb;
+ bna_dma.lsb;
((struct bna_dma_addr *)txq->qpt.kv_qpt_ptr)[i].msb =
- page_mem[i].dma.msb;
+ bna_dma.msb;
+ dma += PAGE_SIZE;
}
}
@@ -3430,8 +3452,8 @@ bna_tx_res_req(int num_txq, int txq_depth, struct bna_res_info *res_info)
res_info[BNA_TX_RES_MEM_T_PAGE].res_type = BNA_RES_T_MEM;
mem_info = &res_info[BNA_TX_RES_MEM_T_PAGE].res_u.mem_info;
mem_info->mem_type = BNA_MEM_T_DMA;
- mem_info->len = PAGE_SIZE;
- mem_info->num = num_txq * page_count;
+ mem_info->len = PAGE_SIZE * page_count;
+ mem_info->num = num_txq;
res_info[BNA_TX_RES_MEM_T_IBIDX].res_type = BNA_RES_T_MEM;
mem_info = &res_info[BNA_TX_RES_MEM_T_IBIDX].res_u.mem_info;
@@ -3457,14 +3479,11 @@ bna_tx_create(struct bna *bna, struct bnad *bnad,
struct bna_txq *txq;
struct list_head *qe;
int page_count;
- int page_size;
- int page_idx;
int i;
intr_info = &res_info[BNA_TX_RES_INTR_T_TXCMPL].res_u.intr_info;
- page_count = (res_info[BNA_TX_RES_MEM_T_PAGE].res_u.mem_info.num) /
- tx_cfg->num_txq;
- page_size = res_info[BNA_TX_RES_MEM_T_PAGE].res_u.mem_info.len;
+ page_count = (res_info[BNA_TX_RES_MEM_T_PAGE].res_u.mem_info.len) /
+ PAGE_SIZE;
/**
* Get resources
@@ -3529,7 +3548,6 @@ bna_tx_create(struct bna *bna, struct bnad *bnad,
/* TxQ */
i = 0;
- page_idx = 0;
list_for_each(qe, &tx->txq_q) {
txq = (struct bna_txq *)qe;
txq->tcb = (struct bna_tcb *)
@@ -3569,14 +3587,11 @@ bna_tx_create(struct bna *bna, struct bnad *bnad,
txq->tcb->id = i;
/* QPT, SWQPT, Pages */
- bna_txq_qpt_setup(txq, page_count, page_size,
+ bna_txq_qpt_setup(txq, page_count, PAGE_SIZE,
&res_info[BNA_TX_RES_MEM_T_QPT].res_u.mem_info.mdl[i],
&res_info[BNA_TX_RES_MEM_T_SWQPT].res_u.mem_info.mdl[i],
&res_info[BNA_TX_RES_MEM_T_PAGE].
- res_u.mem_info.mdl[page_idx]);
- txq->tcb->page_idx = page_idx;
- txq->tcb->page_count = page_count;
- page_idx += page_count;
+ res_u.mem_info.mdl[i]);
/* Callback to bnad for setting up TCB */
if (tx->tcb_setup_cbfn)
diff --git a/drivers/net/ethernet/brocade/bna/bna_types.h b/drivers/net/ethernet/brocade/bna/bna_types.h
index d3eb8bd..dc50f78 100644
--- a/drivers/net/ethernet/brocade/bna/bna_types.h
+++ b/drivers/net/ethernet/brocade/bna/bna_types.h
@@ -430,6 +430,7 @@ struct bna_ib {
struct bna_tcb {
/* Fast path */
void **sw_qpt;
+ void *sw_q;
void *unmap_q;
u32 producer_index;
u32 consumer_index;
@@ -437,8 +438,6 @@ struct bna_tcb {
u32 q_depth;
void __iomem *q_dbell;
struct bna_ib_dbell *i_dbell;
- int page_idx;
- int page_count;
/* Control path */
struct bna_txq *txq;
struct bnad *bnad;
@@ -563,13 +562,12 @@ struct bna_tx_mod {
struct bna_rcb {
/* Fast path */
void **sw_qpt;
+ void *sw_q;
void *unmap_q;
u32 producer_index;
u32 consumer_index;
u32 q_depth;
void __iomem *q_dbell;
- int page_idx;
- int page_count;
/* Control path */
struct bna_rxq *rxq;
struct bna_ccb *ccb;
@@ -626,6 +624,7 @@ struct bna_pkt_rate {
struct bna_ccb {
/* Fast path */
void **sw_qpt;
+ void *sw_q;
u32 producer_index;
volatile u32 *hw_producer_index;
u32 q_depth;
@@ -633,8 +632,6 @@ struct bna_ccb {
struct bna_rcb *rcb[2];
void *ctrl; /* For bnad */
struct bna_pkt_rate pkt_rate;
- int page_idx;
- int page_count;
/* Control path */
struct bna_cq *cq;
diff --git a/drivers/net/ethernet/brocade/bna/bnad.c b/drivers/net/ethernet/brocade/bna/bnad.c
index b7fb391..da5470a 100644
--- a/drivers/net/ethernet/brocade/bna/bnad.c
+++ b/drivers/net/ethernet/brocade/bna/bnad.c
@@ -61,23 +61,17 @@ static const u8 bnad_bcast_addr[] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
/*
* Local MACROS
*/
-#define BNAD_TX_UNMAPQ_DEPTH (bnad->txq_depth * 2)
-
-#define BNAD_RX_UNMAPQ_DEPTH (bnad->rxq_depth)
-
#define BNAD_GET_MBOX_IRQ(_bnad) \
(((_bnad)->cfg_flags & BNAD_CF_MSIX) ? \
((_bnad)->msix_table[BNAD_MAILBOX_MSIX_INDEX].vector) : \
((_bnad)->pcidev->irq))
-#define BNAD_FILL_UNMAPQ_MEM_REQ(_res_info, _num, _depth) \
+#define BNAD_FILL_UNMAPQ_MEM_REQ(_res_info, _num, _size) \
do { \
(_res_info)->res_type = BNA_RES_T_MEM; \
(_res_info)->res_u.mem_info.mem_type = BNA_MEM_T_KVA; \
(_res_info)->res_u.mem_info.num = (_num); \
- (_res_info)->res_u.mem_info.len = \
- sizeof(struct bnad_unmap_q) + \
- (sizeof(struct bnad_skb_unmap) * ((_depth) - 1)); \
+ (_res_info)->res_u.mem_info.len = (_size); \
} while (0)
static void
@@ -103,48 +97,58 @@ bnad_remove_from_list(struct bnad *bnad)
static void
bnad_cq_cleanup(struct bnad *bnad, struct bna_ccb *ccb)
{
- struct bna_cq_entry *cmpl, *next_cmpl;
- unsigned int wi_range, wis = 0, ccb_prod = 0;
+ struct bna_cq_entry *cmpl;
int i;
- BNA_CQ_QPGE_PTR_GET(ccb_prod, ccb->sw_qpt, cmpl,
- wi_range);
-
for (i = 0; i < ccb->q_depth; i++) {
- wis++;
- if (likely(--wi_range))
- next_cmpl = cmpl + 1;
- else {
- BNA_QE_INDX_ADD(ccb_prod, wis, ccb->q_depth);
- wis = 0;
- BNA_CQ_QPGE_PTR_GET(ccb_prod, ccb->sw_qpt,
- next_cmpl, wi_range);
- }
+ cmpl = &((struct bna_cq_entry *)ccb->sw_q)[i];
cmpl->valid = 0;
- cmpl = next_cmpl;
}
}
+/* Tx Datapath functions */
+
+
+/* Caller should ensure that the entry at unmap_q[index] is valid */
static u32
-bnad_pci_unmap_skb(struct device *pdev, struct bnad_skb_unmap *array,
- u32 index, u32 depth, struct sk_buff *skb, u32 frag)
+bnad_tx_buff_unmap(struct bnad *bnad,
+ struct bnad_tx_unmap *unmap_q,
+ u32 q_depth, u32 index)
{
- int j;
- array[index].skb = NULL;
-
- dma_unmap_single(pdev, dma_unmap_addr(&array[index], dma_addr),
- skb_headlen(skb), DMA_TO_DEVICE);
- dma_unmap_addr_set(&array[index], dma_addr, 0);
- BNA_QE_INDX_ADD(index, 1, depth);
+ struct bnad_tx_unmap *unmap;
+ struct sk_buff *skb;
+ int vector, nvecs;
+
+ unmap = &unmap_q[index];
+ nvecs = unmap->nvecs;
+
+ skb = unmap->skb;
+ unmap->skb = NULL;
+ unmap->nvecs = 0;
+ dma_unmap_single(&bnad->pcidev->dev,
+ dma_unmap_addr(&unmap->vectors[0], dma_addr),
+ skb_headlen(skb), DMA_TO_DEVICE);
+ dma_unmap_addr_set(&unmap->vectors[0], dma_addr, 0);
+ nvecs--;
+
+ vector = 0;
+ while (nvecs) {
+ vector++;
+ if (vector == BFI_TX_MAX_VECTORS_PER_WI) {
+ vector = 0;
+ BNA_QE_INDX_INC(index, q_depth);
+ unmap = &unmap_q[index];
+ }
- for (j = 0; j < frag; j++) {
- dma_unmap_page(pdev, dma_unmap_addr(&array[index], dma_addr),
- skb_frag_size(&skb_shinfo(skb)->frags[j]),
- DMA_TO_DEVICE);
- dma_unmap_addr_set(&array[index], dma_addr, 0);
- BNA_QE_INDX_ADD(index, 1, depth);
+ dma_unmap_page(&bnad->pcidev->dev,
+ dma_unmap_addr(&unmap->vectors[vector], dma_addr),
+ skb_shinfo(skb)->frags[nvecs].size, DMA_TO_DEVICE);
+ dma_unmap_addr_set(&unmap->vectors[vector], dma_addr, 0);
+ nvecs--;
}
+ BNA_QE_INDX_INC(index, q_depth);
+
return index;
}
@@ -154,79 +158,64 @@ bnad_pci_unmap_skb(struct device *pdev, struct bnad_skb_unmap *array,
* so DMA unmap & freeing is fine.
*/
static void
-bnad_txq_cleanup(struct bnad *bnad,
- struct bna_tcb *tcb)
+bnad_txq_cleanup(struct bnad *bnad, struct bna_tcb *tcb)
{
- u32 unmap_cons;
- struct bnad_unmap_q *unmap_q = tcb->unmap_q;
- struct bnad_skb_unmap *unmap_array;
- struct sk_buff *skb = NULL;
- int q;
-
- unmap_array = unmap_q->unmap_array;
+ struct bnad_tx_unmap *unmap_q = tcb->unmap_q;
+ struct sk_buff *skb;
+ int i;
- for (q = 0; q < unmap_q->q_depth; q++) {
- skb = unmap_array[q].skb;
+ for (i = 0; i < tcb->q_depth; i++) {
+ skb = unmap_q[i].skb;
if (!skb)
continue;
-
- unmap_cons = q;
- unmap_cons = bnad_pci_unmap_skb(&bnad->pcidev->dev, unmap_array,
- unmap_cons, unmap_q->q_depth, skb,
- skb_shinfo(skb)->nr_frags);
+ bnad_tx_buff_unmap(bnad, unmap_q, tcb->q_depth, i);
dev_kfree_skb_any(skb);
}
}
-/* Data Path Handlers */
-
/*
* bnad_txcmpl_process : Frees the Tx bufs on Tx completion
* Can be called in a) Interrupt context
* b) Sending context
*/
static u32
-bnad_txcmpl_process(struct bnad *bnad,
- struct bna_tcb *tcb)
+bnad_txcmpl_process(struct bnad *bnad, struct bna_tcb *tcb)
{
- u32 unmap_cons, sent_packets = 0, sent_bytes = 0;
- u16 wis, updated_hw_cons;
- struct bnad_unmap_q *unmap_q = tcb->unmap_q;
- struct bnad_skb_unmap *unmap_array;
- struct sk_buff *skb;
+ u32 sent_packets = 0, sent_bytes = 0;
+ u32 wis, unmap_wis, hw_cons, cons, q_depth;
+ struct bnad_tx_unmap *unmap_q = tcb->unmap_q;
+ struct bnad_tx_unmap *unmap;
+ struct sk_buff *skb;
/* Just return if TX is stopped */
if (!test_bit(BNAD_TXQ_TX_STARTED, &tcb->flags))
return 0;
- updated_hw_cons = *(tcb->hw_consumer_index);
-
- wis = BNA_Q_INDEX_CHANGE(tcb->consumer_index,
- updated_hw_cons, tcb->q_depth);
+ hw_cons = *(tcb->hw_consumer_index);
+ cons = tcb->consumer_index;
+ q_depth = tcb->q_depth;
+ wis = BNA_Q_INDEX_CHANGE(cons, hw_cons, q_depth);
BUG_ON(!(wis <= BNA_QE_IN_USE_CNT(tcb, tcb->q_depth)));
- unmap_array = unmap_q->unmap_array;
- unmap_cons = unmap_q->consumer_index;
-
while (wis) {
- skb = unmap_array[unmap_cons].skb;
+ unmap = &unmap_q[cons];
+
+ skb = unmap->skb;
sent_packets++;
sent_bytes += skb->len;
- wis -= BNA_TXQ_WI_NEEDED(1 + skb_shinfo(skb)->nr_frags);
- unmap_cons = bnad_pci_unmap_skb(&bnad->pcidev->dev, unmap_array,
- unmap_cons, unmap_q->q_depth, skb,
- skb_shinfo(skb)->nr_frags);
+ unmap_wis = BNA_TXQ_WI_NEEDED(unmap->nvecs);
+ wis -= unmap_wis;
+ cons = bnad_tx_buff_unmap(bnad, unmap_q, q_depth, cons);
dev_kfree_skb_any(skb);
}
/* Update consumer pointers. */
- tcb->consumer_index = updated_hw_cons;
- unmap_q->consumer_index = unmap_cons;
+ tcb->consumer_index = hw_cons;
tcb->txq->tx_packets += sent_packets;
tcb->txq->tx_bytes += sent_bytes;
@@ -278,110 +267,79 @@ bnad_msix_tx(int irq, void *data)
}
static void
-bnad_rcb_cleanup(struct bnad *bnad, struct bna_rcb *rcb)
-{
- struct bnad_unmap_q *unmap_q = rcb->unmap_q;
-
- rcb->producer_index = 0;
- rcb->consumer_index = 0;
-
- unmap_q->producer_index = 0;
- unmap_q->consumer_index = 0;
-}
-
-static void
bnad_rxq_cleanup(struct bnad *bnad, struct bna_rcb *rcb)
{
- struct bnad_unmap_q *unmap_q;
- struct bnad_skb_unmap *unmap_array;
+ struct bnad_rx_unmap *unmap_q = rcb->unmap_q;
struct sk_buff *skb;
- int unmap_cons;
+ int i;
+
+ for (i = 0; i < rcb->q_depth; i++) {
+ struct bnad_rx_unmap *unmap = &unmap_q[i];
- unmap_q = rcb->unmap_q;
- unmap_array = unmap_q->unmap_array;
- for (unmap_cons = 0; unmap_cons < unmap_q->q_depth; unmap_cons++) {
- skb = unmap_array[unmap_cons].skb;
+ skb = unmap->skb;
if (!skb)
continue;
- unmap_array[unmap_cons].skb = NULL;
+
+ unmap->skb = NULL;
dma_unmap_single(&bnad->pcidev->dev,
- dma_unmap_addr(&unmap_array[unmap_cons],
- dma_addr),
- rcb->rxq->buffer_size,
- DMA_FROM_DEVICE);
- dev_kfree_skb(skb);
+ dma_unmap_addr(&unmap->vector, dma_addr),
+ unmap->vector.len, DMA_FROM_DEVICE);
+ dma_unmap_addr_set(&unmap->vector, dma_addr, 0);
+ unmap->vector.len = 0;
+ dev_kfree_skb_any(skb);
}
- bnad_rcb_cleanup(bnad, rcb);
}
+/* Allocate and post BNAD_RXQ_REFILL_THRESHOLD_SHIFT buffers at a time */
static void
bnad_rxq_post(struct bnad *bnad, struct bna_rcb *rcb)
{
- u16 to_alloc, alloced, unmap_prod, wi_range;
- struct bnad_unmap_q *unmap_q = rcb->unmap_q;
- struct bnad_skb_unmap *unmap_array;
+ u32 to_alloc, alloced, prod, q_depth, buff_sz;
+ struct bnad_rx_unmap *unmap_q = rcb->unmap_q;
+ struct bnad_rx_unmap *unmap;
struct bna_rxq_entry *rxent;
struct sk_buff *skb;
dma_addr_t dma_addr;
+ buff_sz = rcb->rxq->buffer_size;
alloced = 0;
- to_alloc =
- BNA_QE_FREE_CNT(unmap_q, unmap_q->q_depth);
-
- unmap_array = unmap_q->unmap_array;
- unmap_prod = unmap_q->producer_index;
+ to_alloc = BNA_QE_FREE_CNT(rcb, rcb->q_depth);
+ if (!(to_alloc >> BNAD_RXQ_REFILL_THRESHOLD_SHIFT))
+ return;
- BNA_RXQ_QPGE_PTR_GET(unmap_prod, rcb->sw_qpt, rxent, wi_range);
+ prod = rcb->producer_index;
+ q_depth = rcb->q_depth;
while (to_alloc--) {
- if (!wi_range)
- BNA_RXQ_QPGE_PTR_GET(unmap_prod, rcb->sw_qpt, rxent,
- wi_range);
skb = netdev_alloc_skb_ip_align(bnad->netdev,
- rcb->rxq->buffer_size);
+ buff_sz);
if (unlikely(!skb)) {
BNAD_UPDATE_CTR(bnad, rxbuf_alloc_failed);
rcb->rxq->rxbuf_alloc_failed++;
goto finishing;
}
- unmap_array[unmap_prod].skb = skb;
dma_addr = dma_map_single(&bnad->pcidev->dev, skb->data,
- rcb->rxq->buffer_size,
- DMA_FROM_DEVICE);
- dma_unmap_addr_set(&unmap_array[unmap_prod], dma_addr,
- dma_addr);
- BNA_SET_DMA_ADDR(dma_addr, &rxent->host_addr);
- BNA_QE_INDX_ADD(unmap_prod, 1, unmap_q->q_depth);
+ buff_sz, DMA_FROM_DEVICE);
+ rxent = &((struct bna_rxq_entry *)rcb->sw_q)[prod];
- rxent++;
- wi_range--;
+ BNA_SET_DMA_ADDR(dma_addr, &rxent->host_addr);
+ unmap = &unmap_q[prod];
+ unmap->skb = skb;
+ dma_unmap_addr_set(&unmap->vector, dma_addr, dma_addr);
+ unmap->vector.len = buff_sz;
+ BNA_QE_INDX_INC(prod, q_depth);
alloced++;
}
finishing:
if (likely(alloced)) {
- unmap_q->producer_index = unmap_prod;
- rcb->producer_index = unmap_prod;
+ rcb->producer_index = prod;
smp_mb();
if (likely(test_bit(BNAD_RXQ_POST_OK, &rcb->flags)))
bna_rxq_prod_indx_doorbell(rcb);
}
}
-static inline void
-bnad_refill_rxq(struct bnad *bnad, struct bna_rcb *rcb)
-{
- struct bnad_unmap_q *unmap_q = rcb->unmap_q;
-
- if (!test_and_set_bit(BNAD_RXQ_REFILL, &rcb->flags)) {
- if (BNA_QE_FREE_CNT(unmap_q, unmap_q->q_depth)
- >> BNAD_RXQ_REFILL_THRESHOLD_SHIFT)
- bnad_rxq_post(bnad, rcb);
- smp_mb__before_clear_bit();
- clear_bit(BNAD_RXQ_REFILL, &rcb->flags);
- }
-}
-
#define flags_cksum_prot_mask (BNA_CQ_EF_IPV4 | BNA_CQ_EF_L3_CKSUM_OK | \
BNA_CQ_EF_IPV6 | \
BNA_CQ_EF_TCP | BNA_CQ_EF_UDP | \
@@ -399,21 +357,21 @@ bnad_refill_rxq(struct bnad *bnad, struct bna_rcb *rcb)
static u32
bnad_cq_process(struct bnad *bnad, struct bna_ccb *ccb, int budget)
{
- struct bna_cq_entry *cmpl, *next_cmpl;
+ struct bna_cq_entry *cq, *cmpl, *next_cmpl;
struct bna_rcb *rcb = NULL;
- unsigned int wi_range, packets = 0, wis = 0;
- struct bnad_unmap_q *unmap_q;
- struct bnad_skb_unmap *unmap_array, *curr_ua;
+ struct bnad_rx_unmap *unmap_q, *unmap;
+ unsigned int packets = 0;
struct sk_buff *skb;
- u32 flags, unmap_cons, masked_flags;
+ u32 flags, masked_flags;
struct bna_pkt_rate *pkt_rt = &ccb->pkt_rate;
struct bnad_rx_ctrl *rx_ctrl = (struct bnad_rx_ctrl *)(ccb->ctrl);
prefetch(bnad->netdev);
- BNA_CQ_QPGE_PTR_GET(ccb->producer_index, ccb->sw_qpt, cmpl,
- wi_range);
- BUG_ON(!(wi_range <= ccb->q_depth));
- while (cmpl->valid && packets < budget) {
+
+ cq = ccb->sw_q;
+ cmpl = &cq[ccb->producer_index];
+
+ while (cmpl->valid && (packets < budget)) {
packets++;
BNA_UPDATE_PKT_CNT(pkt_rt, ntohs(cmpl->length));
@@ -423,33 +381,19 @@ bnad_cq_process(struct bnad *bnad, struct bna_ccb *ccb, int budget)
rcb = ccb->rcb[0];
unmap_q = rcb->unmap_q;
- unmap_array = unmap_q->unmap_array;
- unmap_cons = unmap_q->consumer_index;
+ unmap = &unmap_q[rcb->consumer_index];
- curr_ua = &unmap_array[unmap_cons];
-
- skb = curr_ua->skb;
- BUG_ON(!(skb));\
- curr_ua->skb = NULL;
+ skb = unmap->skb;
+ BUG_ON(!(skb));
+ unmap->skb = NULL;
dma_unmap_single(&bnad->pcidev->dev,
- dma_unmap_addr(curr_ua, dma_addr),
- rcb->rxq->buffer_size,
- DMA_FROM_DEVICE);
- BNA_QE_INDX_ADD(unmap_q->consumer_index, 1, unmap_q->q_depth);
-
- /* Should be more efficient ? Performance ? */
- BNA_QE_INDX_ADD(rcb->consumer_index, 1, rcb->q_depth);
-
- wis++;
- if (likely(--wi_range))
- next_cmpl = cmpl + 1;
- else {
- BNA_QE_INDX_ADD(ccb->producer_index, wis, ccb->q_depth);
- wis = 0;
- BNA_CQ_QPGE_PTR_GET(ccb->producer_index, ccb->sw_qpt,
- next_cmpl, wi_range);
- BUG_ON(!(wi_range <= ccb->q_depth));
- }
+ dma_unmap_addr(&unmap->vector, dma_addr),
+ unmap->vector.len, DMA_FROM_DEVICE);
+ unmap->vector.len = 0;
+ BNA_QE_INDX_INC(rcb->consumer_index, rcb->q_depth);
+ BNA_QE_INDX_INC(ccb->producer_index, ccb->q_depth);
+ next_cmpl = &cq[ccb->producer_index];
+
prefetch(next_cmpl);
flags = ntohl(cmpl->flags);
@@ -493,16 +437,12 @@ next:
cmpl = next_cmpl;
}
- BNA_QE_INDX_ADD(ccb->producer_index, wis, ccb->q_depth);
-
if (likely(test_bit(BNAD_RXQ_STARTED, &ccb->rcb[0]->flags)))
bna_ib_ack_disable_irq(ccb->i_dbell, packets);
- bnad_refill_rxq(bnad, ccb->rcb[0]);
+ bnad_rxq_post(bnad, ccb->rcb[0]);
if (ccb->rcb[1])
- bnad_refill_rxq(bnad, ccb->rcb[1]);
-
- clear_bit(BNAD_FP_IN_RX_PATH, &rx_ctrl->flags);
+ bnad_rxq_post(bnad, ccb->rcb[1]);
return packets;
}
@@ -777,12 +717,9 @@ bnad_cb_tcb_setup(struct bnad *bnad, struct bna_tcb *tcb)
{
struct bnad_tx_info *tx_info =
(struct bnad_tx_info *)tcb->txq->tx->priv;
- struct bnad_unmap_q *unmap_q = tcb->unmap_q;
+ tcb->priv = tcb;
tx_info->tcb[tcb->id] = tcb;
- unmap_q->producer_index = 0;
- unmap_q->consumer_index = 0;
- unmap_q->q_depth = BNAD_TX_UNMAPQ_DEPTH;
}
static void
@@ -796,16 +733,6 @@ bnad_cb_tcb_destroy(struct bnad *bnad, struct bna_tcb *tcb)
}
static void
-bnad_cb_rcb_setup(struct bnad *bnad, struct bna_rcb *rcb)
-{
- struct bnad_unmap_q *unmap_q = rcb->unmap_q;
-
- unmap_q->producer_index = 0;
- unmap_q->consumer_index = 0;
- unmap_q->q_depth = BNAD_RX_UNMAPQ_DEPTH;
-}
-
-static void
bnad_cb_ccb_setup(struct bnad *bnad, struct bna_ccb *ccb)
{
struct bnad_rx_info *rx_info =
@@ -891,10 +818,9 @@ bnad_tx_cleanup(struct delayed_work *work)
struct bnad_tx_info *tx_info =
container_of(work, struct bnad_tx_info, tx_cleanup_work);
struct bnad *bnad = NULL;
- struct bnad_unmap_q *unmap_q;
struct bna_tcb *tcb;
unsigned long flags;
- uint32_t i, pending = 0;
+ u32 i, pending = 0;
for (i = 0; i < BNAD_MAX_TXQ_PER_TX; i++) {
tcb = tx_info->tcb[i];
@@ -910,10 +836,6 @@ bnad_tx_cleanup(struct delayed_work *work)
bnad_txq_cleanup(bnad, tcb);
- unmap_q = tcb->unmap_q;
- unmap_q->producer_index = 0;
- unmap_q->consumer_index = 0;
-
smp_mb__before_clear_bit();
clear_bit(BNAD_TXQ_FREE_SENT, &tcb->flags);
}
@@ -929,7 +851,6 @@ bnad_tx_cleanup(struct delayed_work *work)
spin_unlock_irqrestore(&bnad->bna_lock, flags);
}
-
static void
bnad_cb_tx_cleanup(struct bnad *bnad, struct bna_tx *tx)
{
@@ -978,7 +899,7 @@ bnad_rx_cleanup(void *work)
struct bnad_rx_ctrl *rx_ctrl;
struct bnad *bnad = NULL;
unsigned long flags;
- uint32_t i;
+ u32 i;
for (i = 0; i < BNAD_MAX_RXP_PER_RX; i++) {
rx_ctrl = &rx_info->rx_ctrl[i];
@@ -1035,7 +956,6 @@ bnad_cb_rx_post(struct bnad *bnad, struct bna_rx *rx)
struct bna_ccb *ccb;
struct bna_rcb *rcb;
struct bnad_rx_ctrl *rx_ctrl;
- struct bnad_unmap_q *unmap_q;
int i;
int j;
@@ -1054,17 +974,7 @@ bnad_cb_rx_post(struct bnad *bnad, struct bna_rx *rx)
set_bit(BNAD_RXQ_STARTED, &rcb->flags);
set_bit(BNAD_RXQ_POST_OK, &rcb->flags);
- unmap_q = rcb->unmap_q;
-
- /* Now allocate & post buffers for this RCB */
- /* !!Allocation in callback context */
- if (!test_and_set_bit(BNAD_RXQ_REFILL, &rcb->flags)) {
- if (BNA_QE_FREE_CNT(unmap_q, unmap_q->q_depth)
- >> BNAD_RXQ_REFILL_THRESHOLD_SHIFT)
- bnad_rxq_post(bnad, rcb);
- smp_mb__before_clear_bit();
- clear_bit(BNAD_RXQ_REFILL, &rcb->flags);
- }
+ bnad_rxq_post(bnad, rcb);
}
}
}
@@ -1788,10 +1698,9 @@ bnad_setup_tx(struct bnad *bnad, u32 tx_id)
spin_unlock_irqrestore(&bnad->bna_lock, flags);
/* Fill Unmap Q memory requirements */
- BNAD_FILL_UNMAPQ_MEM_REQ(
- &res_info[BNA_TX_RES_MEM_T_UNMAPQ],
- bnad->num_txq_per_tx,
- BNAD_TX_UNMAPQ_DEPTH);
+ BNAD_FILL_UNMAPQ_MEM_REQ(&res_info[BNA_TX_RES_MEM_T_UNMAPQ],
+ bnad->num_txq_per_tx, (sizeof(struct bnad_tx_unmap) *
+ bnad->txq_depth));
/* Allocate resources */
err = bnad_tx_res_alloc(bnad, res_info, tx_id);
@@ -1929,7 +1838,7 @@ bnad_setup_rx(struct bnad *bnad, u32 rx_id)
&res_info[BNA_RX_RES_T_INTR].res_u.intr_info;
struct bna_rx_config *rx_config = &bnad->rx_config[rx_id];
static const struct bna_rx_event_cbfn rx_cbfn = {
- .rcb_setup_cbfn = bnad_cb_rcb_setup,
+ .rcb_setup_cbfn = NULL,
.rcb_destroy_cbfn = NULL,
.ccb_setup_cbfn = bnad_cb_ccb_setup,
.ccb_destroy_cbfn = bnad_cb_ccb_destroy,
@@ -1951,11 +1860,10 @@ bnad_setup_rx(struct bnad *bnad, u32 rx_id)
spin_unlock_irqrestore(&bnad->bna_lock, flags);
/* Fill Unmap Q memory requirements */
- BNAD_FILL_UNMAPQ_MEM_REQ(
- &res_info[BNA_RX_RES_MEM_T_UNMAPQ],
- rx_config->num_paths +
- ((rx_config->rxp_type == BNA_RXP_SINGLE) ? 0 :
- rx_config->num_paths), BNAD_RX_UNMAPQ_DEPTH);
+ BNAD_FILL_UNMAPQ_MEM_REQ(&res_info[BNA_RX_RES_MEM_T_UNMAPQ],
+ rx_config->num_paths + ((rx_config->rxp_type == BNA_RXP_SINGLE)
+ ? 0 : rx_config->num_paths), (bnad->rxq_depth *
+ sizeof(struct bnad_rx_unmap)));
/* Allocate resource */
err = bnad_rx_res_alloc(bnad, res_info, rx_id);
@@ -2536,125 +2444,34 @@ bnad_stop(struct net_device *netdev)
}
/* TX */
-/*
- * bnad_start_xmit : Netdev entry point for Transmit
- * Called under lock held by net_device
- */
-static netdev_tx_t
-bnad_start_xmit(struct sk_buff *skb, struct net_device *netdev)
+/* Returns 0 for success */
+static int
+bnad_txq_wi_prepare(struct bnad *bnad, struct bna_tcb *tcb,
+ struct sk_buff *skb, struct bna_txq_entry *txqent)
{
- struct bnad *bnad = netdev_priv(netdev);
- u32 txq_id = 0;
- struct bna_tcb *tcb = bnad->tx_info[0].tcb[txq_id];
-
- u16 txq_prod, vlan_tag = 0;
- u32 unmap_prod, wis, wis_used, wi_range;
- u32 vectors, vect_id, i, acked;
- int err;
- unsigned int len;
- u32 gso_size;
-
- struct bnad_unmap_q *unmap_q = tcb->unmap_q;
- dma_addr_t dma_addr;
- struct bna_txq_entry *txqent;
- u16 flags;
-
- if (unlikely(skb->len <= ETH_HLEN)) {
- dev_kfree_skb(skb);
- BNAD_UPDATE_CTR(bnad, tx_skb_too_short);
- return NETDEV_TX_OK;
- }
- if (unlikely(skb_headlen(skb) > BFI_TX_MAX_DATA_PER_VECTOR)) {
- dev_kfree_skb(skb);
- BNAD_UPDATE_CTR(bnad, tx_skb_headlen_too_long);
- return NETDEV_TX_OK;
- }
- if (unlikely(skb_headlen(skb) == 0)) {
- dev_kfree_skb(skb);
- BNAD_UPDATE_CTR(bnad, tx_skb_headlen_zero);
- return NETDEV_TX_OK;
- }
-
- /*
- * Takes care of the Tx that is scheduled between clearing the flag
- * and the netif_tx_stop_all_queues() call.
- */
- if (unlikely(!test_bit(BNAD_TXQ_TX_STARTED, &tcb->flags))) {
- dev_kfree_skb(skb);
- BNAD_UPDATE_CTR(bnad, tx_skb_stopping);
- return NETDEV_TX_OK;
- }
-
- vectors = 1 + skb_shinfo(skb)->nr_frags;
- if (unlikely(vectors > BFI_TX_MAX_VECTORS_PER_PKT)) {
- dev_kfree_skb(skb);
- BNAD_UPDATE_CTR(bnad, tx_skb_max_vectors);
- return NETDEV_TX_OK;
- }
- wis = BNA_TXQ_WI_NEEDED(vectors); /* 4 vectors per work item */
- acked = 0;
- if (unlikely(wis > BNA_QE_FREE_CNT(tcb, tcb->q_depth) ||
- vectors > BNA_QE_FREE_CNT(unmap_q, unmap_q->q_depth))) {
- if ((u16) (*tcb->hw_consumer_index) !=
- tcb->consumer_index &&
- !test_and_set_bit(BNAD_TXQ_FREE_SENT, &tcb->flags)) {
- acked = bnad_txcmpl_process(bnad, tcb);
- if (likely(test_bit(BNAD_TXQ_TX_STARTED, &tcb->flags)))
- bna_ib_ack(tcb->i_dbell, acked);
- smp_mb__before_clear_bit();
- clear_bit(BNAD_TXQ_FREE_SENT, &tcb->flags);
- } else {
- netif_stop_queue(netdev);
- BNAD_UPDATE_CTR(bnad, netif_queue_stop);
- }
-
- smp_mb();
- /*
- * Check again to deal with race condition between
- * netif_stop_queue here, and netif_wake_queue in
- * interrupt handler which is not inside netif tx lock.
- */
- if (likely
- (wis > BNA_QE_FREE_CNT(tcb, tcb->q_depth) ||
- vectors > BNA_QE_FREE_CNT(unmap_q, unmap_q->q_depth))) {
- BNAD_UPDATE_CTR(bnad, netif_queue_stop);
- return NETDEV_TX_BUSY;
- } else {
- netif_wake_queue(netdev);
- BNAD_UPDATE_CTR(bnad, netif_queue_wakeup);
- }
- }
-
- unmap_prod = unmap_q->producer_index;
- flags = 0;
-
- txq_prod = tcb->producer_index;
- BNA_TXQ_QPGE_PTR_GET(txq_prod, tcb->sw_qpt, txqent, wi_range);
- txqent->hdr.wi.reserved = 0;
- txqent->hdr.wi.num_vectors = vectors;
+ u16 flags = 0;
+ u32 gso_size;
+ u16 vlan_tag = 0;
if (vlan_tx_tag_present(skb)) {
- vlan_tag = (u16) vlan_tx_tag_get(skb);
+ vlan_tag = (u16)vlan_tx_tag_get(skb);
flags |= (BNA_TXQ_WI_CF_INS_PRIO | BNA_TXQ_WI_CF_INS_VLAN);
}
if (test_bit(BNAD_RF_CEE_RUNNING, &bnad->run_flags)) {
- vlan_tag =
- (tcb->priority & 0x7) << 13 | (vlan_tag & 0x1fff);
+ vlan_tag = ((tcb->priority & 0x7) << VLAN_PRIO_SHIFT)
+ | (vlan_tag & 0x1fff);
flags |= (BNA_TXQ_WI_CF_INS_PRIO | BNA_TXQ_WI_CF_INS_VLAN);
}
-
txqent->hdr.wi.vlan_tag = htons(vlan_tag);
if (skb_is_gso(skb)) {
gso_size = skb_shinfo(skb)->gso_size;
-
- if (unlikely(gso_size > netdev->mtu)) {
- dev_kfree_skb(skb);
+ if (unlikely(gso_size > bnad->netdev->mtu)) {
BNAD_UPDATE_CTR(bnad, tx_skb_mss_too_long);
- return NETDEV_TX_OK;
+ return -EINVAL;
}
if (unlikely((gso_size + skb_transport_offset(skb) +
- tcp_hdrlen(skb)) >= skb->len)) {
+ tcp_hdrlen(skb)) >= skb->len)) {
txqent->hdr.wi.opcode =
__constant_htons(BNA_TXQ_WI_SEND);
txqent->hdr.wi.lso_mss = 0;
@@ -2665,25 +2482,22 @@ bnad_start_xmit(struct sk_buff *skb, struct net_device *netdev)
txqent->hdr.wi.lso_mss = htons(gso_size);
}
- err = bnad_tso_prepare(bnad, skb);
- if (unlikely(err)) {
- dev_kfree_skb(skb);
+ if (bnad_tso_prepare(bnad, skb)) {
BNAD_UPDATE_CTR(bnad, tx_skb_tso_prepare);
- return NETDEV_TX_OK;
+ return -EINVAL;
}
+
flags |= (BNA_TXQ_WI_CF_IP_CKSUM | BNA_TXQ_WI_CF_TCP_CKSUM);
txqent->hdr.wi.l4_hdr_size_n_offset =
- htons(BNA_TXQ_WI_L4_HDR_N_OFFSET
- (tcp_hdrlen(skb) >> 2,
- skb_transport_offset(skb)));
- } else {
+ htons(BNA_TXQ_WI_L4_HDR_N_OFFSET(
+ tcp_hdrlen(skb) >> 2, skb_transport_offset(skb)));
+ } else {
txqent->hdr.wi.opcode = __constant_htons(BNA_TXQ_WI_SEND);
txqent->hdr.wi.lso_mss = 0;
- if (unlikely(skb->len > (netdev->mtu + ETH_HLEN))) {
- dev_kfree_skb(skb);
+ if (unlikely(skb->len > (bnad->netdev->mtu + ETH_HLEN))) {
BNAD_UPDATE_CTR(bnad, tx_skb_non_tso_too_long);
- return NETDEV_TX_OK;
+ return -EINVAL;
}
if (skb->ip_summed == CHECKSUM_PARTIAL) {
@@ -2691,11 +2505,13 @@ bnad_start_xmit(struct sk_buff *skb, struct net_device *netdev)
if (skb->protocol == __constant_htons(ETH_P_IP))
proto = ip_hdr(skb)->protocol;
+#ifdef NETIF_F_IPV6_CSUM
else if (skb->protocol ==
__constant_htons(ETH_P_IPV6)) {
/* nexthdr may not be TCP immediately. */
proto = ipv6_hdr(skb)->nexthdr;
}
+#endif
if (proto == IPPROTO_TCP) {
flags |= BNA_TXQ_WI_CF_TCP_CKSUM;
txqent->hdr.wi.l4_hdr_size_n_offset =
@@ -2705,12 +2521,11 @@ bnad_start_xmit(struct sk_buff *skb, struct net_device *netdev)
BNAD_UPDATE_CTR(bnad, tcpcsum_offload);
if (unlikely(skb_headlen(skb) <
- skb_transport_offset(skb) + tcp_hdrlen(skb))) {
- dev_kfree_skb(skb);
+ skb_transport_offset(skb) +
+ tcp_hdrlen(skb))) {
BNAD_UPDATE_CTR(bnad, tx_skb_tcp_hdr);
- return NETDEV_TX_OK;
+ return -EINVAL;
}
-
} else if (proto == IPPROTO_UDP) {
flags |= BNA_TXQ_WI_CF_UDP_CKSUM;
txqent->hdr.wi.l4_hdr_size_n_offset =
@@ -2719,51 +2534,149 @@ bnad_start_xmit(struct sk_buff *skb, struct net_device *netdev)
BNAD_UPDATE_CTR(bnad, udpcsum_offload);
if (unlikely(skb_headlen(skb) <
- skb_transport_offset(skb) +
+ skb_transport_offset(skb) +
sizeof(struct udphdr))) {
- dev_kfree_skb(skb);
BNAD_UPDATE_CTR(bnad, tx_skb_udp_hdr);
- return NETDEV_TX_OK;
+ return -EINVAL;
}
} else {
- dev_kfree_skb(skb);
+
BNAD_UPDATE_CTR(bnad, tx_skb_csum_err);
- return NETDEV_TX_OK;
+ return -EINVAL;
}
- } else {
+ } else
txqent->hdr.wi.l4_hdr_size_n_offset = 0;
- }
}
txqent->hdr.wi.flags = htons(flags);
-
txqent->hdr.wi.frame_length = htonl(skb->len);
- unmap_q->unmap_array[unmap_prod].skb = skb;
+ return 0;
+}
+
+/*
+ * bnad_start_xmit : Netdev entry point for Transmit
+ * Called under lock held by net_device
+ */
+static netdev_tx_t
+bnad_start_xmit(struct sk_buff *skb, struct net_device *netdev)
+{
+ struct bnad *bnad = netdev_priv(netdev);
+ u32 txq_id = 0;
+ struct bna_tcb *tcb = NULL;
+ struct bnad_tx_unmap *unmap_q, *unmap, *head_unmap;
+ u32 prod, q_depth, vect_id;
+ u32 wis, vectors, len;
+ int i;
+ dma_addr_t dma_addr;
+ struct bna_txq_entry *txqent;
+
len = skb_headlen(skb);
- txqent->vector[0].length = htons(len);
- dma_addr = dma_map_single(&bnad->pcidev->dev, skb->data,
- skb_headlen(skb), DMA_TO_DEVICE);
- dma_unmap_addr_set(&unmap_q->unmap_array[unmap_prod], dma_addr,
- dma_addr);
- BNA_SET_DMA_ADDR(dma_addr, &txqent->vector[0].host_addr);
- BNA_QE_INDX_ADD(unmap_prod, 1, unmap_q->q_depth);
+ /* Sanity checks for the skb */
+
+ if (unlikely(skb->len <= ETH_HLEN)) {
+ dev_kfree_skb(skb);
+ BNAD_UPDATE_CTR(bnad, tx_skb_too_short);
+ return NETDEV_TX_OK;
+ }
+ if (unlikely(len > BFI_TX_MAX_DATA_PER_VECTOR)) {
+ dev_kfree_skb(skb);
+ BNAD_UPDATE_CTR(bnad, tx_skb_headlen_zero);
+ return NETDEV_TX_OK;
+ }
+ if (unlikely(len == 0)) {
+ dev_kfree_skb(skb);
+ BNAD_UPDATE_CTR(bnad, tx_skb_headlen_zero);
+ return NETDEV_TX_OK;
+ }
+
+ tcb = bnad->tx_info[0].tcb[txq_id];
+ q_depth = tcb->q_depth;
+ prod = tcb->producer_index;
- vect_id = 0;
- wis_used = 1;
+ unmap_q = tcb->unmap_q;
- for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
+ /*
+ * Takes care of the Tx that is scheduled between clearing the flag
+ * and the netif_tx_stop_all_queues() call.
+ */
+ if (unlikely(!test_bit(BNAD_TXQ_TX_STARTED, &tcb->flags))) {
+ dev_kfree_skb(skb);
+ BNAD_UPDATE_CTR(bnad, tx_skb_stopping);
+ return NETDEV_TX_OK;
+ }
+
+ vectors = 1 + skb_shinfo(skb)->nr_frags;
+ wis = BNA_TXQ_WI_NEEDED(vectors); /* 4 vectors per work item */
+
+ if (unlikely(vectors > BFI_TX_MAX_VECTORS_PER_PKT)) {
+ dev_kfree_skb(skb);
+ BNAD_UPDATE_CTR(bnad, tx_skb_max_vectors);
+ return NETDEV_TX_OK;
+ }
+
+ /* Check for available TxQ resources */
+ if (unlikely(wis > BNA_QE_FREE_CNT(tcb, q_depth))) {
+ if ((*tcb->hw_consumer_index != tcb->consumer_index) &&
+ !test_and_set_bit(BNAD_TXQ_FREE_SENT, &tcb->flags)) {
+ u32 sent;
+ sent = bnad_txcmpl_process(bnad, tcb);
+ if (likely(test_bit(BNAD_TXQ_TX_STARTED, &tcb->flags)))
+ bna_ib_ack(tcb->i_dbell, sent);
+ smp_mb__before_clear_bit();
+ clear_bit(BNAD_TXQ_FREE_SENT, &tcb->flags);
+ } else {
+ netif_stop_queue(netdev);
+ BNAD_UPDATE_CTR(bnad, netif_queue_stop);
+ }
+
+ smp_mb();
+ /*
+ * Check again to deal with race condition between
+ * netif_stop_queue here, and netif_wake_queue in
+ * interrupt handler which is not inside netif tx lock.
+ */
+ if (likely(wis > BNA_QE_FREE_CNT(tcb, q_depth))) {
+ BNAD_UPDATE_CTR(bnad, netif_queue_stop);
+ return NETDEV_TX_BUSY;
+ } else {
+ netif_wake_queue(netdev);
+ BNAD_UPDATE_CTR(bnad, netif_queue_wakeup);
+ }
+ }
+
+ txqent = &((struct bna_txq_entry *)tcb->sw_q)[prod];
+ head_unmap = &unmap_q[prod];
+
+ /* Program the opcode, flags, frame_len, num_vectors in WI */
+ if (bnad_txq_wi_prepare(bnad, tcb, skb, txqent)) {
+ dev_kfree_skb(skb);
+ return NETDEV_TX_OK;
+ }
+ txqent->hdr.wi.reserved = 0;
+ txqent->hdr.wi.num_vectors = vectors;
+
+ head_unmap->skb = skb;
+ head_unmap->nvecs = 0;
+
+ /* Program the vectors */
+ unmap = head_unmap;
+ dma_addr = dma_map_single(&bnad->pcidev->dev, skb->data,
+ len, DMA_TO_DEVICE);
+ BNA_SET_DMA_ADDR(dma_addr, &txqent->vector[0].host_addr);
+ txqent->vector[0].length = htons(len);
+ dma_unmap_addr_set(&unmap->vectors[0], dma_addr, dma_addr);
+ head_unmap->nvecs++;
+
+ for (i = 0, vect_id = 0; i < vectors - 1; i++) {
const struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[i];
u16 size = skb_frag_size(frag);
if (unlikely(size == 0)) {
- unmap_prod = unmap_q->producer_index;
-
- unmap_prod = bnad_pci_unmap_skb(&bnad->pcidev->dev,
- unmap_q->unmap_array,
- unmap_prod, unmap_q->q_depth, skb,
- i);
+ /* Undo the changes starting at tcb->producer_index */
+ bnad_tx_buff_unmap(bnad, unmap_q, q_depth,
+ tcb->producer_index);
dev_kfree_skb(skb);
BNAD_UPDATE_CTR(bnad, tx_skb_frag_zero);
return NETDEV_TX_OK;
@@ -2771,47 +2684,35 @@ bnad_start_xmit(struct sk_buff *skb, struct net_device *netdev)
len += size;
- if (++vect_id == BFI_TX_MAX_VECTORS_PER_WI) {
+ vect_id++;
+ if (vect_id == BFI_TX_MAX_VECTORS_PER_WI) {
vect_id = 0;
- if (--wi_range)
- txqent++;
- else {
- BNA_QE_INDX_ADD(txq_prod, wis_used,
- tcb->q_depth);
- wis_used = 0;
- BNA_TXQ_QPGE_PTR_GET(txq_prod, tcb->sw_qpt,
- txqent, wi_range);
- }
- wis_used++;
+ BNA_QE_INDX_INC(prod, q_depth);
+ txqent = &((struct bna_txq_entry *)tcb->sw_q)[prod];
txqent->hdr.wi_ext.opcode =
__constant_htons(BNA_TXQ_WI_EXTENSION);
+ unmap = &unmap_q[prod];
}
- BUG_ON(!(size <= BFI_TX_MAX_DATA_PER_VECTOR));
- txqent->vector[vect_id].length = htons(size);
dma_addr = skb_frag_dma_map(&bnad->pcidev->dev, frag,
0, size, DMA_TO_DEVICE);
- dma_unmap_addr_set(&unmap_q->unmap_array[unmap_prod], dma_addr,
- dma_addr);
BNA_SET_DMA_ADDR(dma_addr, &txqent->vector[vect_id].host_addr);
- BNA_QE_INDX_ADD(unmap_prod, 1, unmap_q->q_depth);
+ txqent->vector[vect_id].length = htons(size);
+ dma_unmap_addr_set(&unmap->vectors[vect_id], dma_addr,
+ dma_addr);
+ head_unmap->nvecs++;
}
if (unlikely(len != skb->len)) {
- unmap_prod = unmap_q->producer_index;
-
- unmap_prod = bnad_pci_unmap_skb(&bnad->pcidev->dev,
- unmap_q->unmap_array, unmap_prod,
- unmap_q->q_depth, skb,
- skb_shinfo(skb)->nr_frags);
+ /* Undo the changes starting at tcb->producer_index */
+ bnad_tx_buff_unmap(bnad, unmap_q, q_depth, tcb->producer_index);
dev_kfree_skb(skb);
BNAD_UPDATE_CTR(bnad, tx_skb_len_mismatch);
return NETDEV_TX_OK;
}
- unmap_q->producer_index = unmap_prod;
- BNA_QE_INDX_ADD(txq_prod, wis_used, tcb->q_depth);
- tcb->producer_index = txq_prod;
+ BNA_QE_INDX_INC(prod, q_depth);
+ tcb->producer_index = prod;
smp_mb();
@@ -3332,7 +3233,6 @@ bnad_pci_probe(struct pci_dev *pdev,
if (err)
goto res_free;
-
/* Set up timers */
setup_timer(&bnad->bna.ioceth.ioc.ioc_timer, bnad_ioc_timeout,
((unsigned long)bnad));
diff --git a/drivers/net/ethernet/brocade/bna/bnad.h b/drivers/net/ethernet/brocade/bna/bnad.h
index 65fe74e..db132c9 100644
--- a/drivers/net/ethernet/brocade/bna/bnad.h
+++ b/drivers/net/ethernet/brocade/bna/bnad.h
@@ -83,12 +83,9 @@ struct bnad_rx_ctrl {
#define BNAD_IOCETH_TIMEOUT 10000
-#define BNAD_MAX_Q_DEPTH 0x10000
-#define BNAD_MIN_Q_DEPTH 0x200
-
-#define BNAD_MAX_RXQ_DEPTH (BNAD_MAX_Q_DEPTH / bnad_rxqs_per_cq)
-/* keeping MAX TX and RX Q depth equal */
-#define BNAD_MAX_TXQ_DEPTH BNAD_MAX_RXQ_DEPTH
+#define BNAD_MIN_Q_DEPTH 512
+#define BNAD_MAX_RXQ_DEPTH 2048
+#define BNAD_MAX_TXQ_DEPTH 2048
#define BNAD_JUMBO_MTU 9000
@@ -101,9 +98,8 @@ struct bnad_rx_ctrl {
#define BNAD_TXQ_TX_STARTED 1
/* Bit positions for rcb->flags */
-#define BNAD_RXQ_REFILL 0
-#define BNAD_RXQ_STARTED 1
-#define BNAD_RXQ_POST_OK 2
+#define BNAD_RXQ_STARTED 0
+#define BNAD_RXQ_POST_OK 1
/* Resource limits */
#define BNAD_NUM_TXQ (bnad->num_tx * bnad->num_txq_per_tx)
@@ -221,18 +217,24 @@ struct bnad_rx_info {
struct work_struct rx_cleanup_work;
} ____cacheline_aligned;
-/* Unmap queues for Tx / Rx cleanup */
-struct bnad_skb_unmap {
+struct bnad_tx_vector {
+ DEFINE_DMA_UNMAP_ADDR(dma_addr);
+};
+
+struct bnad_tx_unmap {
struct sk_buff *skb;
+ u32 nvecs;
+ struct bnad_tx_vector vectors[BFI_TX_MAX_VECTORS_PER_WI];
+};
+
+struct bnad_rx_vector {
DEFINE_DMA_UNMAP_ADDR(dma_addr);
+ u32 len;
};
-struct bnad_unmap_q {
- u32 producer_index;
- u32 consumer_index;
- u32 q_depth;
- /* This should be the last one */
- struct bnad_skb_unmap unmap_array[1];
+struct bnad_rx_unmap {
+ struct sk_buff *skb;
+ struct bnad_rx_vector vector;
};
/* Bit mask values for bnad->cfg_flags */
@@ -252,11 +254,6 @@ struct bnad_unmap_q {
#define BNAD_RF_STATS_TIMER_RUNNING 5
#define BNAD_RF_TX_PRIO_SET 6
-
-/* Define for Fast Path flags */
-/* Defined as bit positions */
-#define BNAD_FP_IN_RX_PATH 0
-
struct bnad {
struct net_device *netdev;
u32 id;
--
1.7.1
^ permalink raw reply related
* [net-next 5/8] bna: Add RX State
From: Rasesh Mody @ 2012-12-05 23:01 UTC (permalink / raw)
To: davem, netdev; +Cc: adapter_linux_open_src_team, Rasesh Mody
In-Reply-To: <1354748470-26293-1-git-send-email-rmody@brocade.com>
Change Details:
- BNA state machine for Rx in start_wait state moves it to stop_wait on
receipt of RX_E_STOP. In Rx stop_wait state, on receipt of
RX_E_STARTED event does enet stop
RX_E_STOPPED event does rx_cleanup_cbfn
rx_cleanup_cbfn in this case is called without post_cbfn. post_cbfn
happens only after RX_E_STARTED event is received in start_wait. Without
doing post_cbfn, NAPI remains disabled and in cleanup we try to disable
again causing endless wait. ifconfig process and other workers can thus
get stuck.
- Introducing start_stop_wait state for Rx. This state handles the case of
if post_cbfn is not done simply do stop without the cleanup.
Signed-off-by: Rasesh Mody <rmody@brocade.com>
---
drivers/net/ethernet/brocade/bna/bna_tx_rx.c | 27 +++++++++++++++++++++++++-
1 files changed, 26 insertions(+), 1 deletions(-)
diff --git a/drivers/net/ethernet/brocade/bna/bna_tx_rx.c b/drivers/net/ethernet/brocade/bna/bna_tx_rx.c
index 4df6d4b..ea6f4a0 100644
--- a/drivers/net/ethernet/brocade/bna/bna_tx_rx.c
+++ b/drivers/net/ethernet/brocade/bna/bna_tx_rx.c
@@ -1355,6 +1355,8 @@ bfa_fsm_state_decl(bna_rx, stopped,
struct bna_rx, enum bna_rx_event);
bfa_fsm_state_decl(bna_rx, start_wait,
struct bna_rx, enum bna_rx_event);
+bfa_fsm_state_decl(bna_rx, start_stop_wait,
+ struct bna_rx, enum bna_rx_event);
bfa_fsm_state_decl(bna_rx, rxf_start_wait,
struct bna_rx, enum bna_rx_event);
bfa_fsm_state_decl(bna_rx, started,
@@ -1432,7 +1434,7 @@ static void bna_rx_sm_start_wait(struct bna_rx *rx,
{
switch (event) {
case RX_E_STOP:
- bfa_fsm_set_state(rx, bna_rx_sm_stop_wait);
+ bfa_fsm_set_state(rx, bna_rx_sm_start_stop_wait);
break;
case RX_E_FAIL:
@@ -1488,6 +1490,29 @@ bna_rx_sm_rxf_stop_wait(struct bna_rx *rx, enum bna_rx_event event)
}
+static void
+bna_rx_sm_start_stop_wait_entry(struct bna_rx *rx)
+{
+}
+
+static void
+bna_rx_sm_start_stop_wait(struct bna_rx *rx, enum bna_rx_event event)
+{
+ switch (event) {
+ case RX_E_FAIL:
+ case RX_E_STOPPED:
+ bfa_fsm_set_state(rx, bna_rx_sm_stopped);
+ break;
+
+ case RX_E_STARTED:
+ bna_rx_enet_stop(rx);
+ break;
+
+ default:
+ bfa_sm_fault(event);
+ }
+}
+
void
bna_rx_sm_started_entry(struct bna_rx *rx)
{
--
1.7.1
^ permalink raw reply related
* [net-next 0/8] bna: Driver Version Updated to 3.1.2.1
From: Rasesh Mody @ 2012-12-05 23:01 UTC (permalink / raw)
To: davem, netdev; +Cc: adapter_linux_open_src_team, Rasesh Mody
Hi Dave,
The following patch-set includes Tx Rx changes, bug fixes, firmware
naming change, code cleanup and enhancements.
This also updates the BNA driver to v3.1.2.1.
The patches have been compiled and tested against 3.7.0-rc3.
Thanks,
Rasesh
Rasesh Mody (8):
bna: Code Cleanup and Enhancements
bna: Tx and Rx Optimizations
bna: TX Intr Coalescing Fix
bna: Rx Page Based Allocation
bna: Add RX State
bna: Add Stats Clear Counter
bna: Firmware Image Naming Change
bna: Driver Version Updated to 3.1.2.1
drivers/net/ethernet/brocade/bna/bfi_enet.h | 1 +
drivers/net/ethernet/brocade/bna/bna.h | 7 +
drivers/net/ethernet/brocade/bna/bna_hw_defs.h | 3 +-
drivers/net/ethernet/brocade/bna/bna_tx_rx.c | 138 +++--
drivers/net/ethernet/brocade/bna/bna_types.h | 9 +-
drivers/net/ethernet/brocade/bna/bnad.c | 937 +++++++++++++----------
drivers/net/ethernet/brocade/bna/bnad.h | 66 +-
drivers/net/ethernet/brocade/bna/bnad_ethtool.c | 1 +
drivers/net/ethernet/brocade/bna/cna.h | 4 +-
9 files changed, 666 insertions(+), 500 deletions(-)
^ permalink raw reply
* [net-next 6/8] bna: Add Stats Clear Counter
From: Rasesh Mody @ 2012-12-05 23:01 UTC (permalink / raw)
To: davem, netdev; +Cc: adapter_linux_open_src_team, Rasesh Mody
In-Reply-To: <1354748470-26293-1-git-send-email-rmody@brocade.com>
Added Stats clear counter to the bfi_enet_stats_mac structure and ethtool stats
Signed-off-by: Rasesh Mody <rmody@brocade.com>
---
drivers/net/ethernet/brocade/bna/bfi_enet.h | 1 +
drivers/net/ethernet/brocade/bna/bnad_ethtool.c | 1 +
2 files changed, 2 insertions(+), 0 deletions(-)
diff --git a/drivers/net/ethernet/brocade/bna/bfi_enet.h b/drivers/net/ethernet/brocade/bna/bfi_enet.h
index eef6e1f..7d10e33 100644
--- a/drivers/net/ethernet/brocade/bna/bfi_enet.h
+++ b/drivers/net/ethernet/brocade/bna/bfi_enet.h
@@ -787,6 +787,7 @@ struct bfi_enet_stats_bpc {
/* MAC Rx Statistics */
struct bfi_enet_stats_mac {
+ u64 stats_clr_cnt; /* times this stats cleared */
u64 frame_64; /* both rx and tx counter */
u64 frame_65_127; /* both rx and tx counter */
u64 frame_128_255; /* both rx and tx counter */
diff --git a/drivers/net/ethernet/brocade/bna/bnad_ethtool.c b/drivers/net/ethernet/brocade/bna/bnad_ethtool.c
index 40e1e84..455b5a2 100644
--- a/drivers/net/ethernet/brocade/bna/bnad_ethtool.c
+++ b/drivers/net/ethernet/brocade/bna/bnad_ethtool.c
@@ -102,6 +102,7 @@ static const char *bnad_net_stats_strings[BNAD_ETHTOOL_STATS_NUM] = {
"rx_unmap_q_alloc_failed",
"rxbuf_alloc_failed",
+ "mac_stats_clr_cnt",
"mac_frame_64",
"mac_frame_65_127",
"mac_frame_128_255",
--
1.7.1
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox