* Re: [Bugme-new] [Bug 42132] New: Support BCM5750M in tg3
[not found] <bug-42132-10286@https.bugzilla.kernel.org/>
@ 2011-09-01 23:40 ` Andrew Morton
2011-09-02 0:02 ` Francesco Piccinno
2011-09-02 0:06 ` Matt Carlson
0 siblings, 2 replies; 9+ messages in thread
From: Andrew Morton @ 2011-09-01 23:40 UTC (permalink / raw)
To: netdev, Matt Carlson; +Cc: bugme-daemon, Benjamin Li, Michael Chan, stack.box
(switched to email. Please respond via emailed reply-to-all, not via the
bugzilla web interface).
On Wed, 31 Aug 2011 18:18:40 GMT
bugzilla-daemon@bugzilla.kernel.org wrote:
> https://bugzilla.kernel.org/show_bug.cgi?id=42132
>
> Summary: Support BCM5750M in tg3
> Product: Drivers
> Version: 2.5
> Kernel Version: 3.0.3
> Platform: All
> OS/Version: Linux
> Tree: Mainline
> Status: NEW
> Severity: normal
> Priority: P1
> Component: Network
> AssignedTo: drivers_network@kernel-bugs.osdl.org
> ReportedBy: stack.box@gmail.com
> Regression: Yes
>
>
> I have a notebook (HP TC4400) which has a BCM5750 ethernet card inside. The
> ouput of lspci is:
>
> 08:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5750M
> Gigabit Ethernet [14e4:167c]
>
> Commit 67b284d476bcb3d100e946da23d6cf9acfd0465c removed the support for this
> device.
>
67b284d476bcb3d100 says "These devices were never released to the public".
> I wish to have the support for this network card back again. Thanks!
oops ;)
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Bugme-new] [Bug 42132] New: Support BCM5750M in tg3
2011-09-01 23:40 ` [Bugme-new] [Bug 42132] New: Support BCM5750M in tg3 Andrew Morton
@ 2011-09-02 0:02 ` Francesco Piccinno
2011-09-02 0:06 ` Matt Carlson
1 sibling, 0 replies; 9+ messages in thread
From: Francesco Piccinno @ 2011-09-02 0:02 UTC (permalink / raw)
To: Andrew Morton
Cc: netdev, Matt Carlson, bugme-daemon, Benjamin Li, Michael Chan
I know but apparently my laptop was lucky enough :)
Any chance to have the support for this card back?
On Fri, Sep 2, 2011 at 1:40 AM, Andrew Morton <akpm@linux-foundation.org> wrote:
>
> (switched to email. Please respond via emailed reply-to-all, not via the
> bugzilla web interface).
>
> On Wed, 31 Aug 2011 18:18:40 GMT
> bugzilla-daemon@bugzilla.kernel.org wrote:
>
>> https://bugzilla.kernel.org/show_bug.cgi?id=42132
>>
>> Summary: Support BCM5750M in tg3
>> Product: Drivers
>> Version: 2.5
>> Kernel Version: 3.0.3
>> Platform: All
>> OS/Version: Linux
>> Tree: Mainline
>> Status: NEW
>> Severity: normal
>> Priority: P1
>> Component: Network
>> AssignedTo: drivers_network@kernel-bugs.osdl.org
>> ReportedBy: stack.box@gmail.com
>> Regression: Yes
>>
>>
>> I have a notebook (HP TC4400) which has a BCM5750 ethernet card inside. The
>> ouput of lspci is:
>>
>> 08:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5750M
>> Gigabit Ethernet [14e4:167c]
>>
>> Commit 67b284d476bcb3d100e946da23d6cf9acfd0465c removed the support for this
>> device.
>>
>
> 67b284d476bcb3d100 says "These devices were never released to the public".
>
>> I wish to have the support for this network card back again. Thanks!
>
> oops ;)
>
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Bugme-new] [Bug 42132] New: Support BCM5750M in tg3
2011-09-01 23:40 ` [Bugme-new] [Bug 42132] New: Support BCM5750M in tg3 Andrew Morton
2011-09-02 0:02 ` Francesco Piccinno
@ 2011-09-02 0:06 ` Matt Carlson
2011-09-02 0:48 ` Francesco Piccinno
1 sibling, 1 reply; 9+ messages in thread
From: Matt Carlson @ 2011-09-02 0:06 UTC (permalink / raw)
To: Andrew Morton
Cc: netdev@vger.kernel.org, Matthew Carlson,
bugme-daemon@bugzilla.kernel.org, Benjamin Li, Michael Chan,
stack.box@gmail.com
On Thu, Sep 01, 2011 at 04:40:11PM -0700, Andrew Morton wrote:
>
> (switched to email. Please respond via emailed reply-to-all, not via the
> bugzilla web interface).
>
> On Wed, 31 Aug 2011 18:18:40 GMT
> bugzilla-daemon@bugzilla.kernel.org wrote:
>
> > https://bugzilla.kernel.org/show_bug.cgi?id=42132
> >
> > Summary: Support BCM5750M in tg3
> > Product: Drivers
> > Version: 2.5
> > Kernel Version: 3.0.3
> > Platform: All
> > OS/Version: Linux
> > Tree: Mainline
> > Status: NEW
> > Severity: normal
> > Priority: P1
> > Component: Network
> > AssignedTo: drivers_network@kernel-bugs.osdl.org
> > ReportedBy: stack.box@gmail.com
> > Regression: Yes
> >
> >
> > I have a notebook (HP TC4400) which has a BCM5750 ethernet card inside. The
> > ouput of lspci is:
> >
> > 08:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5750M
> > Gigabit Ethernet [14e4:167c]
> >
> > Commit 67b284d476bcb3d100e946da23d6cf9acfd0465c removed the support for this
> > device.
> >
>
> 67b284d476bcb3d100 says "These devices were never released to the public".
>
> > I wish to have the support for this network card back again. Thanks!
>
> oops ;)
Really? All the TC4400 documentation I find says it uses a bcm5753M on a
PCIe bus. Can you post the full output of 'lspci -vvv -s 08:00.0' ?
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Bugme-new] [Bug 42132] New: Support BCM5750M in tg3
2011-09-02 0:06 ` Matt Carlson
@ 2011-09-02 0:48 ` Francesco Piccinno
2011-09-02 1:04 ` Matt Carlson
0 siblings, 1 reply; 9+ messages in thread
From: Francesco Piccinno @ 2011-09-02 0:48 UTC (permalink / raw)
To: Matt Carlson
Cc: Andrew Morton, netdev@vger.kernel.org,
bugme-daemon@bugzilla.kernel.org, Benjamin Li, Michael Chan
Yes sure.
# lspci -vvv -s 08:00.0
08:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5750M
Gigabit Ethernet
Subsystem: Broadcom Corporation NetXtreme BCM5750M Gigabit Ethernet
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at f4100000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data
pcilib: sysfs_read_vpd: read failed: Connection timed out
Not readable
Capabilities: [58] MSI: Enable- Count=1/8 Maskable- 64bit+
Address: 5149526521410124 Data: 8b60
Capabilities: [d0] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <4us, L1 <64us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive-
BWMgmt- ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+
MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [13c v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [160 v1] Device Serial Number 00-00-00-ff-fe-00-00-00
Serial number is CND71700K6.
--
Best regards,
Francesco Piccinno
On Fri, Sep 2, 2011 at 2:06 AM, Matt Carlson <mcarlson@broadcom.com> wrote:
> On Thu, Sep 01, 2011 at 04:40:11PM -0700, Andrew Morton wrote:
>>
>> (switched to email. Please respond via emailed reply-to-all, not via the
>> bugzilla web interface).
>>
>> On Wed, 31 Aug 2011 18:18:40 GMT
>> bugzilla-daemon@bugzilla.kernel.org wrote:
>>
>> > https://bugzilla.kernel.org/show_bug.cgi?id=42132
>> >
>> > Summary: Support BCM5750M in tg3
>> > Product: Drivers
>> > Version: 2.5
>> > Kernel Version: 3.0.3
>> > Platform: All
>> > OS/Version: Linux
>> > Tree: Mainline
>> > Status: NEW
>> > Severity: normal
>> > Priority: P1
>> > Component: Network
>> > AssignedTo: drivers_network@kernel-bugs.osdl.org
>> > ReportedBy: stack.box@gmail.com
>> > Regression: Yes
>> >
>> >
>> > I have a notebook (HP TC4400) which has a BCM5750 ethernet card inside. The
>> > ouput of lspci is:
>> >
>> > 08:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5750M
>> > Gigabit Ethernet [14e4:167c]
>> >
>> > Commit 67b284d476bcb3d100e946da23d6cf9acfd0465c removed the support for this
>> > device.
>> >
>>
>> 67b284d476bcb3d100 says "These devices were never released to the public".
>>
>> > I wish to have the support for this network card back again. Thanks!
>>
>> oops ;)
>
> Really? All the TC4400 documentation I find says it uses a bcm5753M on a
> PCIe bus. Can you post the full output of 'lspci -vvv -s 08:00.0' ?
>
>
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Bugme-new] [Bug 42132] New: Support BCM5750M in tg3
2011-09-02 0:48 ` Francesco Piccinno
@ 2011-09-02 1:04 ` Matt Carlson
2011-09-02 1:14 ` Francesco Piccinno
0 siblings, 1 reply; 9+ messages in thread
From: Matt Carlson @ 2011-09-02 1:04 UTC (permalink / raw)
To: Francesco Piccinno
Cc: Matthew Carlson, Andrew Morton, netdev@vger.kernel.org,
bugme-daemon@bugzilla.kernel.org, Benjamin Li, Michael Chan
It's showing up on lspci as a PCIe device, so it can't be the 5750M.
The bcm5750M is a pci device.
I'm wondering if bootcode is failing. Do you see any messages in your
syslogs that say "No firmware running"?
Can you post the output of 'ethtool -i ethX'?
On Thu, Sep 01, 2011 at 05:48:50PM -0700, Francesco Piccinno wrote:
> Yes sure.
>
> # lspci -vvv -s 08:00.0
> 08:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5750M
> Gigabit Ethernet
> Subsystem: Broadcom Corporation NetXtreme BCM5750M Gigabit Ethernet
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 10
> Region 0: Memory at f4100000 (64-bit, non-prefetchable) [size=64K]
> Capabilities: [48] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
> Capabilities: [50] Vital Product Data
> pcilib: sysfs_read_vpd: read failed: Connection timed out
> Not readable
> Capabilities: [58] MSI: Enable- Count=1/8 Maskable- 64bit+
> Address: 5149526521410124 Data: 8b60
> Capabilities: [d0] Express (v1) Endpoint, MSI 00
> DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
> ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
> MaxPayload 128 bytes, MaxReadReq 512 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
> LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <4us, L1 <64us
> ClockPM- Surprise- LLActRep- BwNot-
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive-
> BWMgmt- ABWMgmt-
> Capabilities: [100 v1] Advanced Error Reporting
> UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
> MalfTLP- ECRC- UnsupReq- ACSViol-
> UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
> MalfTLP- ECRC- UnsupReq- ACSViol-
> UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+
> MalfTLP+ ECRC- UnsupReq- ACSViol-
> CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
> CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
> AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
> Capabilities: [13c v1] Virtual Channel
> Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
> Arb: Fixed- WRR32- WRR64- WRR128-
> Ctrl: ArbSelect=Fixed
> Status: InProgress-
> VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
> Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
> Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
> Status: NegoPending- InProgress-
> Capabilities: [160 v1] Device Serial Number 00-00-00-ff-fe-00-00-00
>
> Serial number is CND71700K6.
> --
> Best regards,
> Francesco Piccinno
>
>
>
> On Fri, Sep 2, 2011 at 2:06 AM, Matt Carlson <mcarlson@broadcom.com> wrote:
> > On Thu, Sep 01, 2011 at 04:40:11PM -0700, Andrew Morton wrote:
> >>
> >> (switched to email. ??Please respond via emailed reply-to-all, not via the
> >> bugzilla web interface).
> >>
> >> On Wed, 31 Aug 2011 18:18:40 GMT
> >> bugzilla-daemon@bugzilla.kernel.org wrote:
> >>
> >> > https://bugzilla.kernel.org/show_bug.cgi?id=42132
> >> >
> >> > ?? ?? ?? ?? ?? ??Summary: Support BCM5750M in tg3
> >> > ?? ?? ?? ?? ?? ??Product: Drivers
> >> > ?? ?? ?? ?? ?? ??Version: 2.5
> >> > ?? ?? Kernel Version: 3.0.3
> >> > ?? ?? ?? ?? ?? Platform: All
> >> > ?? ?? ?? ?? OS/Version: Linux
> >> > ?? ?? ?? ?? ?? ?? ?? Tree: Mainline
> >> > ?? ?? ?? ?? ?? ?? Status: NEW
> >> > ?? ?? ?? ?? ?? Severity: normal
> >> > ?? ?? ?? ?? ?? Priority: P1
> >> > ?? ?? ?? ?? ??Component: Network
> >> > ?? ?? ?? ?? AssignedTo: drivers_network@kernel-bugs.osdl.org
> >> > ?? ?? ?? ?? ReportedBy: stack.box@gmail.com
> >> > ?? ?? ?? ?? Regression: Yes
> >> >
> >> >
> >> > I have a notebook (HP TC4400) which has a BCM5750 ethernet card inside. The
> >> > ouput of lspci is:
> >> >
> >> > 08:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5750M
> >> > Gigabit Ethernet [14e4:167c]
> >> >
> >> > Commit 67b284d476bcb3d100e946da23d6cf9acfd0465c removed the support for this
> >> > device.
> >> >
> >>
> >> 67b284d476bcb3d100 says "These devices were never released to the public".
> >>
> >> > I wish to have the support for this network card back again. Thanks!
> >>
> >> oops ;)
> >
> > Really? ??All the TC4400 documentation I find says it uses a bcm5753M on a
> > PCIe bus. ??Can you post the full output of 'lspci -vvv -s 08:00.0' ?
> >
> >
>
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Bugme-new] [Bug 42132] New: Support BCM5750M in tg3
2011-09-02 1:04 ` Matt Carlson
@ 2011-09-02 1:14 ` Francesco Piccinno
2011-09-02 1:25 ` Matt Carlson
0 siblings, 1 reply; 9+ messages in thread
From: Francesco Piccinno @ 2011-09-02 1:14 UTC (permalink / raw)
To: Matt Carlson
Cc: Andrew Morton, netdev@vger.kernel.org,
bugme-daemon@bugzilla.kernel.org, Benjamin Li, Michael Chan
The only message I get regarding the firmware is the following:
[51503.038205] pci 0000:08:00.0: vpd r/w failed. This is likely a
firmware bug on this device. Contact the card vendor for a firmware
update.
Unfortunately I can not post the output of ethtool since the interface
is not available. Shall I recompile the tg3 module with the proper
patch and post the output?
--
Best regards,
Francesco Piccinno
On Fri, Sep 2, 2011 at 3:04 AM, Matt Carlson <mcarlson@broadcom.com> wrote:
> It's showing up on lspci as a PCIe device, so it can't be the 5750M.
> The bcm5750M is a pci device.
>
> I'm wondering if bootcode is failing. Do you see any messages in your
> syslogs that say "No firmware running"?
>
> Can you post the output of 'ethtool -i ethX'?
>
> On Thu, Sep 01, 2011 at 05:48:50PM -0700, Francesco Piccinno wrote:
>> Yes sure.
>>
>> # lspci -vvv -s 08:00.0
>> 08:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5750M
>> Gigabit Ethernet
>> Subsystem: Broadcom Corporation NetXtreme BCM5750M Gigabit Ethernet
>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
>> Stepping- SERR- FastB2B- DisINTx-
>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>> Latency: 0, Cache Line Size: 64 bytes
>> Interrupt: pin A routed to IRQ 10
>> Region 0: Memory at f4100000 (64-bit, non-prefetchable) [size=64K]
>> Capabilities: [48] Power Management version 2
>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
>> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
>> Capabilities: [50] Vital Product Data
>> pcilib: sysfs_read_vpd: read failed: Connection timed out
>> Not readable
>> Capabilities: [58] MSI: Enable- Count=1/8 Maskable- 64bit+
>> Address: 5149526521410124 Data: 8b60
>> Capabilities: [d0] Express (v1) Endpoint, MSI 00
>> DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
>> ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset-
>> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>> MaxPayload 128 bytes, MaxReadReq 512 bytes
>> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
>> LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <4us, L1 <64us
>> ClockPM- Surprise- LLActRep- BwNot-
>> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
>> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>> LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive-
>> BWMgmt- ABWMgmt-
>> Capabilities: [100 v1] Advanced Error Reporting
>> UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
>> MalfTLP- ECRC- UnsupReq- ACSViol-
>> UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
>> MalfTLP- ECRC- UnsupReq- ACSViol-
>> UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+
>> MalfTLP+ ECRC- UnsupReq- ACSViol-
>> CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
>> CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
>> AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
>> Capabilities: [13c v1] Virtual Channel
>> Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
>> Arb: Fixed- WRR32- WRR64- WRR128-
>> Ctrl: ArbSelect=Fixed
>> Status: InProgress-
>> VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
>> Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
>> Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
>> Status: NegoPending- InProgress-
>> Capabilities: [160 v1] Device Serial Number 00-00-00-ff-fe-00-00-00
>>
>> Serial number is CND71700K6.
>> --
>> Best regards,
>> Francesco Piccinno
>>
>>
>>
>> On Fri, Sep 2, 2011 at 2:06 AM, Matt Carlson <mcarlson@broadcom.com> wrote:
>> > On Thu, Sep 01, 2011 at 04:40:11PM -0700, Andrew Morton wrote:
>> >>
>> >> (switched to email. ??Please respond via emailed reply-to-all, not via the
>> >> bugzilla web interface).
>> >>
>> >> On Wed, 31 Aug 2011 18:18:40 GMT
>> >> bugzilla-daemon@bugzilla.kernel.org wrote:
>> >>
>> >> > https://bugzilla.kernel.org/show_bug.cgi?id=42132
>> >> >
>> >> > ?? ?? ?? ?? ?? ??Summary: Support BCM5750M in tg3
>> >> > ?? ?? ?? ?? ?? ??Product: Drivers
>> >> > ?? ?? ?? ?? ?? ??Version: 2.5
>> >> > ?? ?? Kernel Version: 3.0.3
>> >> > ?? ?? ?? ?? ?? Platform: All
>> >> > ?? ?? ?? ?? OS/Version: Linux
>> >> > ?? ?? ?? ?? ?? ?? ?? Tree: Mainline
>> >> > ?? ?? ?? ?? ?? ?? Status: NEW
>> >> > ?? ?? ?? ?? ?? Severity: normal
>> >> > ?? ?? ?? ?? ?? Priority: P1
>> >> > ?? ?? ?? ?? ??Component: Network
>> >> > ?? ?? ?? ?? AssignedTo: drivers_network@kernel-bugs.osdl.org
>> >> > ?? ?? ?? ?? ReportedBy: stack.box@gmail.com
>> >> > ?? ?? ?? ?? Regression: Yes
>> >> >
>> >> >
>> >> > I have a notebook (HP TC4400) which has a BCM5750 ethernet card inside. The
>> >> > ouput of lspci is:
>> >> >
>> >> > 08:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5750M
>> >> > Gigabit Ethernet [14e4:167c]
>> >> >
>> >> > Commit 67b284d476bcb3d100e946da23d6cf9acfd0465c removed the support for this
>> >> > device.
>> >> >
>> >>
>> >> 67b284d476bcb3d100 says "These devices were never released to the public".
>> >>
>> >> > I wish to have the support for this network card back again. Thanks!
>> >>
>> >> oops ;)
>> >
>> > Really? ??All the TC4400 documentation I find says it uses a bcm5753M on a
>> > PCIe bus. ??Can you post the full output of 'lspci -vvv -s 08:00.0' ?
>> >
>> >
>>
>
>
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Bugme-new] [Bug 42132] New: Support BCM5750M in tg3
2011-09-02 1:14 ` Francesco Piccinno
@ 2011-09-02 1:25 ` Matt Carlson
2011-09-02 9:20 ` Francesco Piccinno
0 siblings, 1 reply; 9+ messages in thread
From: Matt Carlson @ 2011-09-02 1:25 UTC (permalink / raw)
To: Francesco Piccinno
Cc: Matthew Carlson, Andrew Morton, netdev@vger.kernel.org,
bugme-daemon@bugzilla.kernel.org, Benjamin Li, Michael Chan
Yes. Sorry. Please revert that patch. If you really had a bcm5750,
you'd need to revert another patch too, but let's see where we stand
before going down that road.
On Thu, Sep 01, 2011 at 06:14:57PM -0700, Francesco Piccinno wrote:
> The only message I get regarding the firmware is the following:
>
> [51503.038205] pci 0000:08:00.0: vpd r/w failed. This is likely a
> firmware bug on this device. Contact the card vendor for a firmware
> update.
>
> Unfortunately I can not post the output of ethtool since the interface
> is not available. Shall I recompile the tg3 module with the proper
> patch and post the output?
>
> --
> Best regards,
> Francesco Piccinno
>
> On Fri, Sep 2, 2011 at 3:04 AM, Matt Carlson <mcarlson@broadcom.com> wrote:
> > It's showing up on lspci as a PCIe device, so it can't be the 5750M.
> > The bcm5750M is a pci device.
> >
> > I'm wondering if bootcode is failing. ??Do you see any messages in your
> > syslogs that say "No firmware running"?
> >
> > Can you post the output of 'ethtool -i ethX'?
> >
> > On Thu, Sep 01, 2011 at 05:48:50PM -0700, Francesco Piccinno wrote:
> >> Yes sure.
> >>
> >> # lspci -vvv -s 08:00.0
> >> 08:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5750M
> >> Gigabit Ethernet
> >> ?? ?? ?? Subsystem: Broadcom Corporation NetXtreme BCM5750M Gigabit Ethernet
> >> ?? ?? ?? Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> >> Stepping- SERR- FastB2B- DisINTx-
> >> ?? ?? ?? Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> >> <TAbort- <MAbort- >SERR- <PERR- INTx-
> >> ?? ?? ?? Latency: 0, Cache Line Size: 64 bytes
> >> ?? ?? ?? Interrupt: pin A routed to IRQ 10
> >> ?? ?? ?? Region 0: Memory at f4100000 (64-bit, non-prefetchable) [size=64K]
> >> ?? ?? ?? Capabilities: [48] Power Management version 2
> >> ?? ?? ?? ?? ?? ?? ?? Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
> >> ?? ?? ?? ?? ?? ?? ?? Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
> >> ?? ?? ?? Capabilities: [50] Vital Product Data
> >> pcilib: sysfs_read_vpd: read failed: Connection timed out
> >> ?? ?? ?? ?? ?? ?? ?? Not readable
> >> ?? ?? ?? Capabilities: [58] MSI: Enable- Count=1/8 Maskable- 64bit+
> >> ?? ?? ?? ?? ?? ?? ?? Address: 5149526521410124 ??Data: 8b60
> >> ?? ?? ?? Capabilities: [d0] Express (v1) Endpoint, MSI 00
> >> ?? ?? ?? ?? ?? ?? ?? DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
> >> ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset-
> >> ?? ?? ?? ?? ?? ?? ?? DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
> >> ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
> >> ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? MaxPayload 128 bytes, MaxReadReq 512 bytes
> >> ?? ?? ?? ?? ?? ?? ?? DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
> >> ?? ?? ?? ?? ?? ?? ?? LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <4us, L1 <64us
> >> ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ClockPM- Surprise- LLActRep- BwNot-
> >> ?? ?? ?? ?? ?? ?? ?? LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
> >> ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> >> ?? ?? ?? ?? ?? ?? ?? LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive-
> >> BWMgmt- ABWMgmt-
> >> ?? ?? ?? Capabilities: [100 v1] Advanced Error Reporting
> >> ?? ?? ?? ?? ?? ?? ?? UESta: ??DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
> >> MalfTLP- ECRC- UnsupReq- ACSViol-
> >> ?? ?? ?? ?? ?? ?? ?? UEMsk: ??DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
> >> MalfTLP- ECRC- UnsupReq- ACSViol-
> >> ?? ?? ?? ?? ?? ?? ?? UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+
> >> MalfTLP+ ECRC- UnsupReq- ACSViol-
> >> ?? ?? ?? ?? ?? ?? ?? CESta: ??RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
> >> ?? ?? ?? ?? ?? ?? ?? CEMsk: ??RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
> >> ?? ?? ?? ?? ?? ?? ?? AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
> >> ?? ?? ?? Capabilities: [13c v1] Virtual Channel
> >> ?? ?? ?? ?? ?? ?? ?? Caps: ?? LPEVC=0 RefClk=100ns PATEntryBits=1
> >> ?? ?? ?? ?? ?? ?? ?? Arb: ?? ??Fixed- WRR32- WRR64- WRR128-
> >> ?? ?? ?? ?? ?? ?? ?? Ctrl: ?? ArbSelect=Fixed
> >> ?? ?? ?? ?? ?? ?? ?? Status: InProgress-
> >> ?? ?? ?? ?? ?? ?? ?? VC0: ?? ??Caps: ?? PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
> >> ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? Arb: ?? ??Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
> >> ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? Ctrl: ?? Enable+ ID=0 ArbSelect=Fixed TC/VC=01
> >> ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? Status: NegoPending- InProgress-
> >> ?? ?? ?? Capabilities: [160 v1] Device Serial Number 00-00-00-ff-fe-00-00-00
> >>
> >> Serial number is CND71700K6.
> >> --
> >> Best regards,
> >> Francesco Piccinno
> >>
> >>
> >>
> >> On Fri, Sep 2, 2011 at 2:06 AM, Matt Carlson <mcarlson@broadcom.com> wrote:
> >> > On Thu, Sep 01, 2011 at 04:40:11PM -0700, Andrew Morton wrote:
> >> >>
> >> >> (switched to email. ??Please respond via emailed reply-to-all, not via the
> >> >> bugzilla web interface).
> >> >>
> >> >> On Wed, 31 Aug 2011 18:18:40 GMT
> >> >> bugzilla-daemon@bugzilla.kernel.org wrote:
> >> >>
> >> >> > https://bugzilla.kernel.org/show_bug.cgi?id=42132
> >> >> >
> >> >> > ?? ?? ?? ?? ?? ??Summary: Support BCM5750M in tg3
> >> >> > ?? ?? ?? ?? ?? ??Product: Drivers
> >> >> > ?? ?? ?? ?? ?? ??Version: 2.5
> >> >> > ?? ?? Kernel Version: 3.0.3
> >> >> > ?? ?? ?? ?? ?? Platform: All
> >> >> > ?? ?? ?? ?? OS/Version: Linux
> >> >> > ?? ?? ?? ?? ?? ?? ?? Tree: Mainline
> >> >> > ?? ?? ?? ?? ?? ?? Status: NEW
> >> >> > ?? ?? ?? ?? ?? Severity: normal
> >> >> > ?? ?? ?? ?? ?? Priority: P1
> >> >> > ?? ?? ?? ?? ??Component: Network
> >> >> > ?? ?? ?? ?? AssignedTo: drivers_network@kernel-bugs.osdl.org
> >> >> > ?? ?? ?? ?? ReportedBy: stack.box@gmail.com
> >> >> > ?? ?? ?? ?? Regression: Yes
> >> >> >
> >> >> >
> >> >> > I have a notebook (HP TC4400) which has a BCM5750 ethernet card inside. The
> >> >> > ouput of lspci is:
> >> >> >
> >> >> > 08:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5750M
> >> >> > Gigabit Ethernet [14e4:167c]
> >> >> >
> >> >> > Commit 67b284d476bcb3d100e946da23d6cf9acfd0465c removed the support for this
> >> >> > device.
> >> >> >
> >> >>
> >> >> 67b284d476bcb3d100 says "These devices were never released to the public".
> >> >>
> >> >> > I wish to have the support for this network card back again. Thanks!
> >> >>
> >> >> oops ;)
> >> >
> >> > Really? ??All the TC4400 documentation I find says it uses a bcm5753M on a
> >> > PCIe bus. ??Can you post the full output of 'lspci -vvv -s 08:00.0' ?
> >> >
> >> >
> >>
> >
> >
>
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Bugme-new] [Bug 42132] New: Support BCM5750M in tg3
2011-09-02 1:25 ` Matt Carlson
@ 2011-09-02 9:20 ` Francesco Piccinno
2011-09-02 17:43 ` Matt Carlson
0 siblings, 1 reply; 9+ messages in thread
From: Francesco Piccinno @ 2011-09-02 9:20 UTC (permalink / raw)
To: Matt Carlson
Cc: Andrew Morton, netdev@vger.kernel.org,
bugme-daemon@bugzilla.kernel.org, Benjamin Li, Michael Chan
The patch did not apply cleanly. BTW I have figured out an alternative
method. I modified by hand pci_ids.h and tg3.c files. The device seems
to work now.
The output of ethtool -i eth0 gives me:
driver: tg3
version: 3.119
firmware-version:
bus-info: 0000:08:00.0
supports-statistics: yes
supports-test: yes
supports-eeprom-access: yes
supports-register-dump: yes
Messages produced by the driver:
[ 728.741487] tg3 0000:08:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 728.741498] tg3 0000:08:00.0: setting latency timer to 64
[ 728.819963] tg3 0000:08:00.0: vpd r/w failed. This is likely a
firmware bug on this device. Contact the card vendor for a firmware
update.
[ 728.879960] tg3 0000:08:00.0: vpd r/w failed. This is likely a
firmware bug on this device. Contact the card vendor for a firmware
update.
[ 728.939957] tg3 0000:08:00.0: vpd r/w failed. This is likely a
firmware bug on this device. Contact the card vendor for a firmware
update.
[ 728.942680] tg3 0000:08:00.0: eth0: Tigon3 [partno(none) rev 4201]
(PCI Express) MAC address 00:1b:38:38:c6:60
[ 728.942685] tg3 0000:08:00.0: eth0: attached PHY is 5750
(10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 728.942689] tg3 0000:08:00.0: eth0: RXcsums[1] LinkChgREG[0]
MIirq[0] ASF[0] TSOcap[1]
[ 728.942692] tg3 0000:08:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 728.949503] tg3 0000:08:00.0: irq 45 for MSI/MSI-X
[ 730.633610] tg3 0000:08:00.0: eth0: No firmware running
[ 730.650658] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 811.811298] tg3 0000:08:00.0: eth0: Link is up at 100 Mbps, full duplex
[ 811.811306] tg3 0000:08:00.0: eth0: Flow control is on for TX and on for RX
--
Best regards,
Francesco Piccinno
On Fri, Sep 2, 2011 at 3:25 AM, Matt Carlson <mcarlson@broadcom.com> wrote:
> Yes. Sorry. Please revert that patch. If you really had a bcm5750,
> you'd need to revert another patch too, but let's see where we stand
> before going down that road.
>
> On Thu, Sep 01, 2011 at 06:14:57PM -0700, Francesco Piccinno wrote:
>> The only message I get regarding the firmware is the following:
>>
>> [51503.038205] pci 0000:08:00.0: vpd r/w failed. This is likely a
>> firmware bug on this device. Contact the card vendor for a firmware
>> update.
>>
>> Unfortunately I can not post the output of ethtool since the interface
>> is not available. Shall I recompile the tg3 module with the proper
>> patch and post the output?
>>
>> --
>> Best regards,
>> Francesco Piccinno
>>
>> On Fri, Sep 2, 2011 at 3:04 AM, Matt Carlson <mcarlson@broadcom.com> wrote:
>> > It's showing up on lspci as a PCIe device, so it can't be the 5750M.
>> > The bcm5750M is a pci device.
>> >
>> > I'm wondering if bootcode is failing. ??Do you see any messages in your
>> > syslogs that say "No firmware running"?
>> >
>> > Can you post the output of 'ethtool -i ethX'?
>> >
>> > On Thu, Sep 01, 2011 at 05:48:50PM -0700, Francesco Piccinno wrote:
>> >> Yes sure.
>> >>
>> >> # lspci -vvv -s 08:00.0
>> >> 08:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5750M
>> >> Gigabit Ethernet
>> >> ?? ?? ?? Subsystem: Broadcom Corporation NetXtreme BCM5750M Gigabit Ethernet
>> >> ?? ?? ?? Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
>> >> Stepping- SERR- FastB2B- DisINTx-
>> >> ?? ?? ?? Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
>> >> <TAbort- <MAbort- >SERR- <PERR- INTx-
>> >> ?? ?? ?? Latency: 0, Cache Line Size: 64 bytes
>> >> ?? ?? ?? Interrupt: pin A routed to IRQ 10
>> >> ?? ?? ?? Region 0: Memory at f4100000 (64-bit, non-prefetchable) [size=64K]
>> >> ?? ?? ?? Capabilities: [48] Power Management version 2
>> >> ?? ?? ?? ?? ?? ?? ?? Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
>> >> ?? ?? ?? ?? ?? ?? ?? Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
>> >> ?? ?? ?? Capabilities: [50] Vital Product Data
>> >> pcilib: sysfs_read_vpd: read failed: Connection timed out
>> >> ?? ?? ?? ?? ?? ?? ?? Not readable
>> >> ?? ?? ?? Capabilities: [58] MSI: Enable- Count=1/8 Maskable- 64bit+
>> >> ?? ?? ?? ?? ?? ?? ?? Address: 5149526521410124 ??Data: 8b60
>> >> ?? ?? ?? Capabilities: [d0] Express (v1) Endpoint, MSI 00
>> >> ?? ?? ?? ?? ?? ?? ?? DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
>> >> ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset-
>> >> ?? ?? ?? ?? ?? ?? ?? DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>> >> ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>> >> ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? MaxPayload 128 bytes, MaxReadReq 512 bytes
>> >> ?? ?? ?? ?? ?? ?? ?? DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
>> >> ?? ?? ?? ?? ?? ?? ?? LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <4us, L1 <64us
>> >> ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ClockPM- Surprise- LLActRep- BwNot-
>> >> ?? ?? ?? ?? ?? ?? ?? LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
>> >> ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>> >> ?? ?? ?? ?? ?? ?? ?? LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive-
>> >> BWMgmt- ABWMgmt-
>> >> ?? ?? ?? Capabilities: [100 v1] Advanced Error Reporting
>> >> ?? ?? ?? ?? ?? ?? ?? UESta: ??DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
>> >> MalfTLP- ECRC- UnsupReq- ACSViol-
>> >> ?? ?? ?? ?? ?? ?? ?? UEMsk: ??DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
>> >> MalfTLP- ECRC- UnsupReq- ACSViol-
>> >> ?? ?? ?? ?? ?? ?? ?? UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+
>> >> MalfTLP+ ECRC- UnsupReq- ACSViol-
>> >> ?? ?? ?? ?? ?? ?? ?? CESta: ??RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
>> >> ?? ?? ?? ?? ?? ?? ?? CEMsk: ??RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
>> >> ?? ?? ?? ?? ?? ?? ?? AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
>> >> ?? ?? ?? Capabilities: [13c v1] Virtual Channel
>> >> ?? ?? ?? ?? ?? ?? ?? Caps: ?? LPEVC=0 RefClk=100ns PATEntryBits=1
>> >> ?? ?? ?? ?? ?? ?? ?? Arb: ?? ??Fixed- WRR32- WRR64- WRR128-
>> >> ?? ?? ?? ?? ?? ?? ?? Ctrl: ?? ArbSelect=Fixed
>> >> ?? ?? ?? ?? ?? ?? ?? Status: InProgress-
>> >> ?? ?? ?? ?? ?? ?? ?? VC0: ?? ??Caps: ?? PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
>> >> ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? Arb: ?? ??Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
>> >> ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? Ctrl: ?? Enable+ ID=0 ArbSelect=Fixed TC/VC=01
>> >> ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? Status: NegoPending- InProgress-
>> >> ?? ?? ?? Capabilities: [160 v1] Device Serial Number 00-00-00-ff-fe-00-00-00
>> >>
>> >> Serial number is CND71700K6.
>> >> --
>> >> Best regards,
>> >> Francesco Piccinno
>> >>
>> >>
>> >>
>> >> On Fri, Sep 2, 2011 at 2:06 AM, Matt Carlson <mcarlson@broadcom.com> wrote:
>> >> > On Thu, Sep 01, 2011 at 04:40:11PM -0700, Andrew Morton wrote:
>> >> >>
>> >> >> (switched to email. ??Please respond via emailed reply-to-all, not via the
>> >> >> bugzilla web interface).
>> >> >>
>> >> >> On Wed, 31 Aug 2011 18:18:40 GMT
>> >> >> bugzilla-daemon@bugzilla.kernel.org wrote:
>> >> >>
>> >> >> > https://bugzilla.kernel.org/show_bug.cgi?id=42132
>> >> >> >
>> >> >> > ?? ?? ?? ?? ?? ??Summary: Support BCM5750M in tg3
>> >> >> > ?? ?? ?? ?? ?? ??Product: Drivers
>> >> >> > ?? ?? ?? ?? ?? ??Version: 2.5
>> >> >> > ?? ?? Kernel Version: 3.0.3
>> >> >> > ?? ?? ?? ?? ?? Platform: All
>> >> >> > ?? ?? ?? ?? OS/Version: Linux
>> >> >> > ?? ?? ?? ?? ?? ?? ?? Tree: Mainline
>> >> >> > ?? ?? ?? ?? ?? ?? Status: NEW
>> >> >> > ?? ?? ?? ?? ?? Severity: normal
>> >> >> > ?? ?? ?? ?? ?? Priority: P1
>> >> >> > ?? ?? ?? ?? ??Component: Network
>> >> >> > ?? ?? ?? ?? AssignedTo: drivers_network@kernel-bugs.osdl.org
>> >> >> > ?? ?? ?? ?? ReportedBy: stack.box@gmail.com
>> >> >> > ?? ?? ?? ?? Regression: Yes
>> >> >> >
>> >> >> >
>> >> >> > I have a notebook (HP TC4400) which has a BCM5750 ethernet card inside. The
>> >> >> > ouput of lspci is:
>> >> >> >
>> >> >> > 08:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5750M
>> >> >> > Gigabit Ethernet [14e4:167c]
>> >> >> >
>> >> >> > Commit 67b284d476bcb3d100e946da23d6cf9acfd0465c removed the support for this
>> >> >> > device.
>> >> >> >
>> >> >>
>> >> >> 67b284d476bcb3d100 says "These devices were never released to the public".
>> >> >>
>> >> >> > I wish to have the support for this network card back again. Thanks!
>> >> >>
>> >> >> oops ;)
>> >> >
>> >> > Really? ??All the TC4400 documentation I find says it uses a bcm5753M on a
>> >> > PCIe bus. ??Can you post the full output of 'lspci -vvv -s 08:00.0' ?
>> >> >
>> >> >
>> >>
>> >
>> >
>>
>
>
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Bugme-new] [Bug 42132] New: Support BCM5750M in tg3
2011-09-02 9:20 ` Francesco Piccinno
@ 2011-09-02 17:43 ` Matt Carlson
0 siblings, 0 replies; 9+ messages in thread
From: Matt Carlson @ 2011-09-02 17:43 UTC (permalink / raw)
To: Francesco Piccinno
Cc: Matthew Carlson, Andrew Morton, netdev@vger.kernel.org,
bugme-daemon@bugzilla.kernel.org, Benjamin Li, Michael Chan
The output shows that the device's firmware isn't running. Since the
firmware version also doesn't show up in the 'ethtool -i' output, it
might mean that firmware is completely missing.
You probably don't want to leave the device the way it is now. I'd
contact your vendor to see if you can get your firmware reprogrammed.
On Fri, Sep 02, 2011 at 02:20:10AM -0700, Francesco Piccinno wrote:
> The patch did not apply cleanly. BTW I have figured out an alternative
> method. I modified by hand pci_ids.h and tg3.c files. The device seems
> to work now.
>
> The output of ethtool -i eth0 gives me:
> driver: tg3
> version: 3.119
> firmware-version:
> bus-info: 0000:08:00.0
> supports-statistics: yes
> supports-test: yes
> supports-eeprom-access: yes
> supports-register-dump: yes
>
> Messages produced by the driver:
>
> [ 728.741487] tg3 0000:08:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> [ 728.741498] tg3 0000:08:00.0: setting latency timer to 64
> [ 728.819963] tg3 0000:08:00.0: vpd r/w failed. This is likely a
> firmware bug on this device. Contact the card vendor for a firmware
> update.
> [ 728.879960] tg3 0000:08:00.0: vpd r/w failed. This is likely a
> firmware bug on this device. Contact the card vendor for a firmware
> update.
> [ 728.939957] tg3 0000:08:00.0: vpd r/w failed. This is likely a
> firmware bug on this device. Contact the card vendor for a firmware
> update.
> [ 728.942680] tg3 0000:08:00.0: eth0: Tigon3 [partno(none) rev 4201]
> (PCI Express) MAC address 00:1b:38:38:c6:60
> [ 728.942685] tg3 0000:08:00.0: eth0: attached PHY is 5750
> (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
> [ 728.942689] tg3 0000:08:00.0: eth0: RXcsums[1] LinkChgREG[0]
> MIirq[0] ASF[0] TSOcap[1]
> [ 728.942692] tg3 0000:08:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
> [ 728.949503] tg3 0000:08:00.0: irq 45 for MSI/MSI-X
> [ 730.633610] tg3 0000:08:00.0: eth0: No firmware running
> [ 730.650658] ADDRCONF(NETDEV_UP): eth0: link is not ready
> [ 811.811298] tg3 0000:08:00.0: eth0: Link is up at 100 Mbps, full duplex
> [ 811.811306] tg3 0000:08:00.0: eth0: Flow control is on for TX and on for RX
>
> --
> Best regards,
> Francesco Piccinno
>
>
>
> On Fri, Sep 2, 2011 at 3:25 AM, Matt Carlson <mcarlson@broadcom.com> wrote:
> > Yes. ??Sorry. ??Please revert that patch. ??If you really had a bcm5750,
> > you'd need to revert another patch too, but let's see where we stand
> > before going down that road.
> >
> > On Thu, Sep 01, 2011 at 06:14:57PM -0700, Francesco Piccinno wrote:
> >> The only message I get regarding the firmware is the following:
> >>
> >> [51503.038205] pci 0000:08:00.0: vpd r/w failed. ??This is likely a
> >> firmware bug on this device. ??Contact the card vendor for a firmware
> >> update.
> >>
> >> Unfortunately I can not post the output of ethtool since the interface
> >> is not available. Shall I recompile the tg3 module with the proper
> >> patch and post the output?
> >>
> >> --
> >> Best regards,
> >> Francesco Piccinno
> >>
> >> On Fri, Sep 2, 2011 at 3:04 AM, Matt Carlson <mcarlson@broadcom.com> wrote:
> >> > It's showing up on lspci as a PCIe device, so it can't be the 5750M.
> >> > The bcm5750M is a pci device.
> >> >
> >> > I'm wondering if bootcode is failing. ??Do you see any messages in your
> >> > syslogs that say "No firmware running"?
> >> >
> >> > Can you post the output of 'ethtool -i ethX'?
> >> >
> >> > On Thu, Sep 01, 2011 at 05:48:50PM -0700, Francesco Piccinno wrote:
> >> >> Yes sure.
> >> >>
> >> >> # lspci -vvv -s 08:00.0
> >> >> 08:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5750M
> >> >> Gigabit Ethernet
> >> >> ?? ?? ?? Subsystem: Broadcom Corporation NetXtreme BCM5750M Gigabit Ethernet
> >> >> ?? ?? ?? Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> >> >> Stepping- SERR- FastB2B- DisINTx-
> >> >> ?? ?? ?? Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> >> >> <TAbort- <MAbort- >SERR- <PERR- INTx-
> >> >> ?? ?? ?? Latency: 0, Cache Line Size: 64 bytes
> >> >> ?? ?? ?? Interrupt: pin A routed to IRQ 10
> >> >> ?? ?? ?? Region 0: Memory at f4100000 (64-bit, non-prefetchable) [size=64K]
> >> >> ?? ?? ?? Capabilities: [48] Power Management version 2
> >> >> ?? ?? ?? ?? ?? ?? ?? Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
> >> >> ?? ?? ?? ?? ?? ?? ?? Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
> >> >> ?? ?? ?? Capabilities: [50] Vital Product Data
> >> >> pcilib: sysfs_read_vpd: read failed: Connection timed out
> >> >> ?? ?? ?? ?? ?? ?? ?? Not readable
> >> >> ?? ?? ?? Capabilities: [58] MSI: Enable- Count=1/8 Maskable- 64bit+
> >> >> ?? ?? ?? ?? ?? ?? ?? Address: 5149526521410124 ??Data: 8b60
> >> >> ?? ?? ?? Capabilities: [d0] Express (v1) Endpoint, MSI 00
> >> >> ?? ?? ?? ?? ?? ?? ?? DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
> >> >> ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset-
> >> >> ?? ?? ?? ?? ?? ?? ?? DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
> >> >> ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
> >> >> ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? MaxPayload 128 bytes, MaxReadReq 512 bytes
> >> >> ?? ?? ?? ?? ?? ?? ?? DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
> >> >> ?? ?? ?? ?? ?? ?? ?? LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <4us, L1 <64us
> >> >> ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ClockPM- Surprise- LLActRep- BwNot-
> >> >> ?? ?? ?? ?? ?? ?? ?? LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
> >> >> ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> >> >> ?? ?? ?? ?? ?? ?? ?? LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive-
> >> >> BWMgmt- ABWMgmt-
> >> >> ?? ?? ?? Capabilities: [100 v1] Advanced Error Reporting
> >> >> ?? ?? ?? ?? ?? ?? ?? UESta: ??DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
> >> >> MalfTLP- ECRC- UnsupReq- ACSViol-
> >> >> ?? ?? ?? ?? ?? ?? ?? UEMsk: ??DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
> >> >> MalfTLP- ECRC- UnsupReq- ACSViol-
> >> >> ?? ?? ?? ?? ?? ?? ?? UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+
> >> >> MalfTLP+ ECRC- UnsupReq- ACSViol-
> >> >> ?? ?? ?? ?? ?? ?? ?? CESta: ??RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
> >> >> ?? ?? ?? ?? ?? ?? ?? CEMsk: ??RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
> >> >> ?? ?? ?? ?? ?? ?? ?? AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
> >> >> ?? ?? ?? Capabilities: [13c v1] Virtual Channel
> >> >> ?? ?? ?? ?? ?? ?? ?? Caps: ?? LPEVC=0 RefClk=100ns PATEntryBits=1
> >> >> ?? ?? ?? ?? ?? ?? ?? Arb: ?? ??Fixed- WRR32- WRR64- WRR128-
> >> >> ?? ?? ?? ?? ?? ?? ?? Ctrl: ?? ArbSelect=Fixed
> >> >> ?? ?? ?? ?? ?? ?? ?? Status: InProgress-
> >> >> ?? ?? ?? ?? ?? ?? ?? VC0: ?? ??Caps: ?? PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
> >> >> ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? Arb: ?? ??Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
> >> >> ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? Ctrl: ?? Enable+ ID=0 ArbSelect=Fixed TC/VC=01
> >> >> ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? Status: NegoPending- InProgress-
> >> >> ?? ?? ?? Capabilities: [160 v1] Device Serial Number 00-00-00-ff-fe-00-00-00
> >> >>
> >> >> Serial number is CND71700K6.
> >> >> --
> >> >> Best regards,
> >> >> Francesco Piccinno
> >> >>
> >> >>
> >> >>
> >> >> On Fri, Sep 2, 2011 at 2:06 AM, Matt Carlson <mcarlson@broadcom.com> wrote:
> >> >> > On Thu, Sep 01, 2011 at 04:40:11PM -0700, Andrew Morton wrote:
> >> >> >>
> >> >> >> (switched to email. ??Please respond via emailed reply-to-all, not via the
> >> >> >> bugzilla web interface).
> >> >> >>
> >> >> >> On Wed, 31 Aug 2011 18:18:40 GMT
> >> >> >> bugzilla-daemon@bugzilla.kernel.org wrote:
> >> >> >>
> >> >> >> > https://bugzilla.kernel.org/show_bug.cgi?id=42132
> >> >> >> >
> >> >> >> > ?? ?? ?? ?? ?? ??Summary: Support BCM5750M in tg3
> >> >> >> > ?? ?? ?? ?? ?? ??Product: Drivers
> >> >> >> > ?? ?? ?? ?? ?? ??Version: 2.5
> >> >> >> > ?? ?? Kernel Version: 3.0.3
> >> >> >> > ?? ?? ?? ?? ?? Platform: All
> >> >> >> > ?? ?? ?? ?? OS/Version: Linux
> >> >> >> > ?? ?? ?? ?? ?? ?? ?? Tree: Mainline
> >> >> >> > ?? ?? ?? ?? ?? ?? Status: NEW
> >> >> >> > ?? ?? ?? ?? ?? Severity: normal
> >> >> >> > ?? ?? ?? ?? ?? Priority: P1
> >> >> >> > ?? ?? ?? ?? ??Component: Network
> >> >> >> > ?? ?? ?? ?? AssignedTo: drivers_network@kernel-bugs.osdl.org
> >> >> >> > ?? ?? ?? ?? ReportedBy: stack.box@gmail.com
> >> >> >> > ?? ?? ?? ?? Regression: Yes
> >> >> >> >
> >> >> >> >
> >> >> >> > I have a notebook (HP TC4400) which has a BCM5750 ethernet card inside. The
> >> >> >> > ouput of lspci is:
> >> >> >> >
> >> >> >> > 08:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5750M
> >> >> >> > Gigabit Ethernet [14e4:167c]
> >> >> >> >
> >> >> >> > Commit 67b284d476bcb3d100e946da23d6cf9acfd0465c removed the support for this
> >> >> >> > device.
> >> >> >> >
> >> >> >>
> >> >> >> 67b284d476bcb3d100 says "These devices were never released to the public".
> >> >> >>
> >> >> >> > I wish to have the support for this network card back again. Thanks!
> >> >> >>
> >> >> >> oops ;)
> >> >> >
> >> >> > Really? ??All the TC4400 documentation I find says it uses a bcm5753M on a
> >> >> > PCIe bus. ??Can you post the full output of 'lspci -vvv -s 08:00.0' ?
> >> >> >
> >> >> >
> >> >>
> >> >
> >> >
> >>
> >
> >
>
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2011-09-02 17:43 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <bug-42132-10286@https.bugzilla.kernel.org/>
2011-09-01 23:40 ` [Bugme-new] [Bug 42132] New: Support BCM5750M in tg3 Andrew Morton
2011-09-02 0:02 ` Francesco Piccinno
2011-09-02 0:06 ` Matt Carlson
2011-09-02 0:48 ` Francesco Piccinno
2011-09-02 1:04 ` Matt Carlson
2011-09-02 1:14 ` Francesco Piccinno
2011-09-02 1:25 ` Matt Carlson
2011-09-02 9:20 ` Francesco Piccinno
2011-09-02 17:43 ` Matt Carlson
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).