Re: [net-next v5 3/3] net: dsa: yt921x: Add support for Motorcomm YT921x

[Yangfl <mmyangfl@gmail.com>]

On Thu, Aug 21, 2025 at 4:30 PM Russell King (Oracle)
<linux@armlinux.org.uk> wrote:
>
> On Wed, Aug 20, 2025 at 03:54:16PM +0800, David Yang wrote:
> > +static int
> > +yt921x_port_config(struct yt921x_priv *priv, int port, unsigned int mode,
> > +                const struct phylink_link_state *state)
> > +{
> > +     const struct yt921x_info *info = priv->info;
> > +     struct device *dev = to_device(priv);
> > +     enum yt921x_fixed fixed;
> > +     bool duplex_full;
> > +     u32 mask;
> > +     u32 ctrl;
> > +     int res;
> > +
> > +     if (state->interface != PHY_INTERFACE_MODE_INTERNAL &&
> > +         !yt921x_info_port_is_external(info, port)) {
> > +             dev_err(dev, "Wrong mode %d on port %d\n",
> > +                     state->interface, port);
> > +             return -EINVAL;
> > +     }
> > +
> > +     fixed = YT921X_FIXED_NOTFIXED;
> > +     ctrl = YT921X_PORT_LINK;
> > +     if (mode == MLO_AN_FIXED)
> > +             switch (state->speed) {
>
> Someone clearly doesn't believe in reading the documentation before
> writing code. This also hasn't been tested in any way. Sorry, but
> I'm going to put as much effort into this review as you have into
> understanding the phylink API, and thus my review ends here.
>
> NAK.
>
> --
> RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
> FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!

Sorry I'm quite new here. I don't understand very clearly why a
different set of calls is involved in dsa_switch_ops, so I referred to
other dsa drivers and made a working driver (at least tested on my
device), but I would appreciate it much if you could point it out in
an earlier version of series.

Sorry for any disturbance.