netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Íñigo Huguet" <ihuguet@redhat.com>
To: jesse.brandeburg@intel.com, anthony.l.nguyen@intel.com
Cc: davem@davemloft.net, edumazet@google.com, kuba@kernel.org,
	 pabeni@redhat.com, intel-wired-lan@lists.osuosl.org,
	netdev@vger.kernel.org
Subject: Re: [PATCH net-next] net: igc: return error for link autoneg=off
Date: Mon, 24 Jun 2024 12:23:28 +0200	[thread overview]
Message-ID: <CACT4oufqR100dshYZXw76MOvmkgNmSfViAwcktK6b2JMENbkcw@mail.gmail.com> (raw)
In-Reply-To: <20240624095331.351039-1-ihuguet@redhat.com>

Sorry, I thought I had done `git pull` on my net-next tree, but I
didn't and the patch doesn't apply due to context differences.

I will send an updated patch in one or two days, including the
requested changes if there are any.

On Mon, Jun 24, 2024 at 11:53 AM Íñigo Huguet <ihuguet@redhat.com> wrote:
>
> The driver doesn't support force mode for the link settings. However, if
> the user request it, it's just ignored and success is returned. Return
> ENOTSUPP instead.
>
> Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
> ---
>  drivers/net/ethernet/intel/igc/igc_ethtool.c | 18 ++++++++++--------
>  1 file changed, 10 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/net/ethernet/intel/igc/igc_ethtool.c b/drivers/net/ethernet/intel/igc/igc_ethtool.c
> index 93bce729be76..b7b32344d074 100644
> --- a/drivers/net/ethernet/intel/igc/igc_ethtool.c
> +++ b/drivers/net/ethernet/intel/igc/igc_ethtool.c
> @@ -1832,6 +1832,12 @@ igc_ethtool_set_link_ksettings(struct net_device *netdev,
>                 }
>         }
>
> +       /* The driver does not support force mode yet */
> +       if (cmd->base.autoneg == AUTONEG_DISABLE) {
> +               netdev_err(dev, "Force mode currently not supported\n");
> +               return -EOPNOTSUPP;
> +       }
> +
>         while (test_and_set_bit(__IGC_RESETTING, &adapter->state))
>                 usleep_range(1000, 2000);
>
> @@ -1844,14 +1850,10 @@ igc_ethtool_set_link_ksettings(struct net_device *netdev,
>         if (ethtool_link_ksettings_test_link_mode(cmd, advertising, 2500baseT_Full))
>                 advertising |= ADVERTISE_2500_FULL;
>
> -       if (cmd->base.autoneg == AUTONEG_ENABLE) {
> -               hw->mac.autoneg = 1;
> -               hw->phy.autoneg_advertised = advertising;
> -               if (adapter->fc_autoneg)
> -                       hw->fc.requested_mode = igc_fc_default;
> -       } else {
> -               netdev_info(dev, "Force mode currently not supported\n");
> -       }
> +       hw->mac.autoneg = 1;
> +       hw->phy.autoneg_advertised = advertising;
> +       if (adapter->fc_autoneg)
> +               hw->fc.requested_mode = igc_fc_default;
>
>         /* MDI-X => 2; MDI => 1; Auto => 3 */
>         if (cmd->base.eth_tp_mdix_ctrl) {
> --
> 2.44.0
>


-- 
Íñigo Huguet


      reply	other threads:[~2024-06-24 10:23 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-06-24  9:53 [PATCH net-next] net: igc: return error for link autoneg=off Íñigo Huguet
2024-06-24 10:23 ` Íñigo Huguet [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CACT4oufqR100dshYZXw76MOvmkgNmSfViAwcktK6b2JMENbkcw@mail.gmail.com \
    --to=ihuguet@redhat.com \
    --cc=anthony.l.nguyen@intel.com \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=intel-wired-lan@lists.osuosl.org \
    --cc=jesse.brandeburg@intel.com \
    --cc=kuba@kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).