From: Krzysztof Kozlowski <krzk@kernel.org>
To: Heiner Kallweit <hkallweit1@gmail.com>,
Andrew Lunn <andrew@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
Florian Fainelli <f.fainelli@gmail.com>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Stefan Agner <stefan@agner.ch>
Subject: [BUG bisect] Missing Micrel driver on VF50 (net: phy: check return code when requesting PHY driver module)
Date: Fri, 18 Jan 2019 09:39:28 +0100 [thread overview]
Message-ID: <CAJKOXPdHhUGoQmrX8_23MfbibozipkAzXA_5woVSFJSK9BvbXw@mail.gmail.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 1131 bytes --]
Hi,
On today's next (next-20190118) my Colibri VF50 board fails to boot up
from network (DHCP, NFSv4 root). Looks like missing network adapter.
Expected:
[ 3.041773] Micrel KSZ8041 400d1000.ethernet-1:00: attached PHY driver
[Micrel KSZ8041] (mii_bus:phy_addr=400d1000.ethernet-1:00, irq=POLL)
Result:
[ 15.614964] Root-NFS: no NFS server address
[ 15.619353] VFS: Unable to mount root fs via NFS, trying floppy.
[ 15.626762] VFS: Cannot open root device "nfs" or unknown-block(2,0): error -6
[ 15.634252] Please append a correct "root=" boot option; here are the
available partitions:
[ 15.642791] 0100 16384 ram0
[ 15.642804] (driver?)
[ 15.649076] Kernel panic - not syncing: VFS: Unable to mount root fs
on unknown-block(2,0)
[ 15.657423] ---[ end Kernel panic - not syncing: VFS: Unable to mount
root fs on unknown-block(2,0) ]---
Bisect pointed to:
net: phy: check return code when requesting PHY driver module
Full log and defconfig attached.
Board:
- Toradex Colibri VF50 on Iris board
ARMv7, UP, Cortext-A5, NXP VF500, 128 MB RAM, 128 MB NAND
Systemd: v232
DHCP, NFSv4 root
Best regards,
Krzysztof
[-- Attachment #2: serial_console.txt --]
[-- Type: text/plain, Size: 28540 bytes --]
run nfsboot
Booting from NFS...
BOOTP broadcast 1
DHCP client bound to address 192.168.10.18 (106 ms)
Using FEC device
TFTP from server 192.168.10.1; our IP address is 192.168.10.18
Filename 'colibri_vf-nfsboot-buildbot/zImage'.
Load address: 0x81000000
Loading: *
################################################## 4.1 MiB
8 MiB/s
done
Bytes transferred = 4289136 (417270 hex)
Using FEC device
TFTP from server 192.168.10.1; our IP address is 192.168.10.18
Filename 'vf500-colibri-eval-v3-buildbot.dtb'.
Load address: 0x82000000
Loading: *
################################################## 22.8 KiB
1.1 MiB/s
done
Bytes transferred = 23297 (5b01 hex)
Kernel image @ 0x81000000 [ 0x000000 - 0x417270 ]
## Flattened Device Tree blob at 82000000
Booting using the fdt blob at 0x82000000
Using Device Tree in place at 82000000, end 82008b00
Updating MTD partitions...
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 5.0.0-rc2-next-20190118-g9673b4a (oe-user@oe-host) (gcc version 6.4.0 (GCC)) #1 Fri Jan 18 04:31:35 UTC 2019
[ 0.000000] CPU: ARMv7 Processor [410fc051] revision 1 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Toradex Colibri VF50 on Proceq GPR Baseboard Prototype 2
[ 0.000000] Memory policy: Data cache writeback
[ 0.000000] cma: Reserved 16 MiB at 0x87000000
[ 0.000000] CPU: All CPU(s) started in SVC mode.
[ 0.000000] random: get_random_bytes called from start_kernel+0x9c/0x3ec with crng_init=0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32512
[ 0.000000] Kernel command line: ip=::::colibri-vf-buildbot:eth0: root=/dev/nfs ubi.mtd=ubi1 console=tty1 console=ttyLP0,115200n8 consoleblank=0
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Memory: 103808K/131072K available (6144K kernel code, 212K rwdata, 1684K rodata, 1024K init, 144K bss, 10880K reserved, 16384K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0x88800000 - 0xff800000 (1904 MB)
[ 0.000000] lowmem : 0x80000000 - 0x88000000 ( 128 MB)
[ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB)
[ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (7136 kB)
[ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB)
[ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 213 kB)
[ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 145 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000056] sched_clock: 64 bits at 132MHz, resolution 7ns, wraps every 2199023255551ns
[ 0.000119] clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x1e7178659b, max_idle_ns: 440795204301 ns
[ 0.000204] Switching to timer-based delay loop, resolution 7ns
[ 0.001382] Console: colour dummy device 80x30
[ 0.002108] printk: console [tty1] enabled
[ 0.002204] Calibrating delay loop (skipped), value calculated using timer frequency.. 264.00 BogoMIPS (lpj=1320000)
[ 0.002292] pid_max: default: 32768 minimum: 301
[ 0.002736] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.002832] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.004299] *** VALIDATE proc ***
[ 0.004766] *** VALIDATE cgroup1 ***
[ 0.004849] *** VALIDATE cgroup2 ***
[ 0.005058] CPU: Testing write buffer coherency: ok
[ 0.007532] Setting up static identity map for 0x80100000 - 0x80100060
[ 0.010505] devtmpfs: initialized
[ 0.024416] VFP support v0.3: implementor 41 architecture 2 part 30 variant 5 rev 1
[ 0.025291] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.025411] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.027786] pinctrl core: initialized pinctrl subsystem
[ 0.031030] NET: Registered protocol family 16
[ 0.035195] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.038187] cpuidle: using governor menu
[ 0.038585] hw-breakpoint: found 2 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.038665] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.051453] vf610-pinctrl 40048000.iomuxc: initialized IMX pinctrl driver
[ 0.116352] +V3.3: supplied by 3.3V
[ 0.118649] SCSI subsystem initialized
[ 0.119445] usbcore: registered new interface driver usbfs
[ 0.119709] usbcore: registered new interface driver hub
[ 0.120078] usbcore: registered new device driver usb
[ 0.122926] i2c i2c-0: using dma0chan0 (tx) and dma0chan1 (rx) for DMA transfers
[ 0.123037] i2c i2c-0: IMX I2C adapter registered
[ 0.123771] pps_core: LinuxPPS API ver. 1 registered
[ 0.123843] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.124001] PTP clock support registered
[ 0.127716] clocksource: Switched to clocksource arm_global_timer
[ 0.167428] NET: Registered protocol family 2
[ 0.169236] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes)
[ 0.169386] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.169475] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.169548] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.170022] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.170142] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.170783] NET: Registered protocol family 1
[ 0.172637] RPC: Registered named UNIX socket transport module.
[ 0.172728] RPC: Registered udp transport module.
[ 0.172769] RPC: Registered tcp transport module.
[ 0.172805] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.174859] hw perfevents: enabled with armv7_cortex_a5 PMU driver, 3 counters available
[ 0.178899] Initialise system trusted keyrings
[ 0.179439] workingset: timestamp_bits=30 max_order=15 bucket_order=0
[ 0.199542] NFS: Registering the id_resolver key type
[ 0.199683] Key type id_resolver registered
[ 0.199735] Key type id_legacy registered
[ 0.199903] ntfs: driver 2.1.32 [Flags: R/W].
[ 0.201619] fuse init (API version 7.28)
[ 0.230353] Key type asymmetric registered
[ 0.230448] Asymmetric key parser 'x509' registered
[ 0.230550] io scheduler mq-deadline registered
[ 0.230598] io scheduler kyber registered
[ 0.235178] gpio gpiochip1: (vf610-gpio): detected irqchip that is shared with multiple gpiochips: please fix the driver.
[ 0.236847] gpio gpiochip2: (vf610-gpio): detected irqchip that is shared with multiple gpiochips: please fix the driver.
[ 0.238834] gpio gpiochip3: (vf610-gpio): detected irqchip that is shared with multiple gpiochips: please fix the driver.
[ 0.240527] gpio gpiochip4: (vf610-gpio): detected irqchip that is shared with multiple gpiochips: please fix the driver.
[ 0.246136] 40027000.serial: ttyLP0 at MMIO 0x40027000 (irq = 19, base_baud = 4125000) is a FSL_LPUART
[ 0.819361] printk: console [ttyLP0] enabled
[ 0.825657] 40029000.serial: ttyLP2 at MMIO 0x40029000 (irq = 20, base_baud = 4125000) is a FSL_LPUART
[ 0.840776] brd: module loaded
[ 0.866114] loop: module loaded
[ 0.872916] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xf1
[ 0.879464] nand: Macronix NAND 128MiB 3,3V 8-bit
[ 0.884225] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 0.892343] Bad block table found at page 65472, version 0x01
[ 0.898494] Bad block table found at page 65408, version 0x01
[ 0.904544] nand_read_bbt: bad block at 0x0000013c0000
[ 0.910023] 6 fixed-partitions partitions found on MTD device vf610_nfc
[ 0.916692] Creating 6 MTD partitions on "vf610_nfc":
[ 0.921889] 0x000000000000-0x000000020000 : "vf-bcb"
[ 0.928861] 0x000000020000-0x000000180000 : "u-boot"
[ 0.935559] 0x000000180000-0x0000001c0000 : "u-boot-env"
[ 0.942708] 0x0000001c0000-0x000004080000 : "ubi1"
[ 0.949794] 0x000004080000-0x000007f40000 : "ubi2"
[ 0.956700] 0x000007f40000-0x000007f80000 : "reserved"
[ 0.967551] ------------[ cut here ]------------
[ 0.972447] WARNING: CPU: 0 PID: 1 at /home/buildbot/worker/builddir_yocto/build/build/tmp/work-shared/col-vf50-proceq-mainline-next/kernel-source/drivers/spi/spidev.c:730 spidev_probe+0xe4/0x198
[ 0.990024] /soc/aips-bus@40000000/spi@4002c000/spidev@0: buggy DT: spidev listed directly in DT
[ 0.998931] Modules linked in:
[ 1.002057] CPU: 0 PID: 1 Comm: swapper Not tainted 5.0.0-rc2-next-20190118-g9673b4a #1
[ 1.010170] Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree)
[ 1.016722] [<8010df3c>] (unwind_backtrace) from [<8010b65c>] (show_stack+0x10/0x14)
[ 1.024639] [<8010b65c>] (show_stack) from [<8011a890>] (__warn+0xf8/0x110)
[ 1.031761] [<8011a890>] (__warn) from [<8011a8f0>] (warn_slowpath_fmt+0x48/0x6c)
[ 1.039417] [<8011a8f0>] (warn_slowpath_fmt) from [<80478800>] (spidev_probe+0xe4/0x198)
[ 1.047601] [<80478800>] (spidev_probe) from [<804754fc>] (spi_drv_probe+0x88/0xa0)
[ 1.055425] [<804754fc>] (spi_drv_probe) from [<80414adc>] (really_probe+0xf4/0x2c8)
[ 1.063336] [<80414adc>] (really_probe) from [<80414e14>] (driver_probe_device+0x60/0x16c)
[ 1.071764] [<80414e14>] (driver_probe_device) from [<80413088>] (bus_for_each_drv+0x74/0xb8)
[ 1.080449] [<80413088>] (bus_for_each_drv) from [<80414978>] (__device_attach+0xd0/0x138)
[ 1.088870] [<80414978>] (__device_attach) from [<80413e7c>] (bus_probe_device+0x84/0x8c)
[ 1.097138] [<80413e7c>] (bus_probe_device) from [<80411204>] (device_add+0x3a8/0x5e8)
[ 1.105240] [<80411204>] (device_add) from [<80476378>] (spi_add_device+0x9c/0x14c)
[ 1.113075] [<80476378>] (spi_add_device) from [<80476ec0>] (spi_register_controller+0x694/0xaec)
[ 1.122120] [<80476ec0>] (spi_register_controller) from [<80479ef8>] (dspi_probe+0x2cc/0x6a8)
[ 1.130820] [<80479ef8>] (dspi_probe) from [<8041675c>] (platform_drv_probe+0x48/0x9c)
[ 1.138903] [<8041675c>] (platform_drv_probe) from [<80414adc>] (really_probe+0xf4/0x2c8)
[ 1.147164] [<80414adc>] (really_probe) from [<80414e14>] (driver_probe_device+0x60/0x16c)
[ 1.155589] [<80414e14>] (driver_probe_device) from [<80414ffc>] (__driver_attach+0xdc/0xe0)
[ 1.164184] [<80414ffc>] (__driver_attach) from [<80412fb4>] (bus_for_each_dev+0x68/0xb4)
[ 1.172524] [<80412fb4>] (bus_for_each_dev) from [<8041407c>] (bus_add_driver+0x100/0x20c)
[ 1.180953] [<8041407c>] (bus_add_driver) from [<80415928>] (driver_register+0x78/0x10c)
[ 1.189214] [<80415928>] (driver_register) from [<801025ec>] (do_one_initcall+0x54/0x194)
[ 1.197479] [<801025ec>] (do_one_initcall) from [<80900e14>] (kernel_init_freeable+0x12c/0x1c8)
[ 1.206347] [<80900e14>] (kernel_init_freeable) from [<80627efc>] (kernel_init+0x8/0x110)
[ 1.214687] [<80627efc>] (kernel_init) from [<801010e8>] (ret_from_fork+0x14/0x2c)
[ 1.222389] Exception stack(0x86843fb0 to 0x86843ff8)
[ 1.227489] 3fa0: 00000000 00000000 00000000 00000000
[ 1.235796] 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 1.244095] 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000
[ 1.250839] ---[ end trace c38e2aa5992c4c9a ]---
[ 1.257053] ------------[ cut here ]------------
[ 1.261922] WARNING: CPU: 0 PID: 1 at /home/buildbot/worker/builddir_yocto/build/build/tmp/work-shared/col-vf50-proceq-mainline-next/kernel-source/drivers/spi/spidev.c:730 spidev_probe+0xe4/0x198
[ 1.279487] /soc/aips-bus@40000000/spi@4002c000/spidev@1: buggy DT: spidev listed directly in DT
[ 1.288385] Modules linked in:
[ 1.291506] CPU: 0 PID: 1 Comm: swapper Tainted: G W 5.0.0-rc2-next-20190118-g9673b4a #1
[ 1.301000] Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree)
[ 1.307544] [<8010df3c>] (unwind_backtrace) from [<8010b65c>] (show_stack+0x10/0x14)
[ 1.315443] [<8010b65c>] (show_stack) from [<8011a890>] (__warn+0xf8/0x110)
[ 1.322550] [<8011a890>] (__warn) from [<8011a8f0>] (warn_slowpath_fmt+0x48/0x6c)
[ 1.330190] [<8011a8f0>] (warn_slowpath_fmt) from [<80478800>] (spidev_probe+0xe4/0x198)
[ 1.338445] [<80478800>] (spidev_probe) from [<804754fc>] (spi_drv_probe+0x88/0xa0)
[ 1.346195] [<804754fc>] (spi_drv_probe) from [<80414adc>] (really_probe+0xf4/0x2c8)
[ 1.354096] [<80414adc>] (really_probe) from [<80414e14>] (driver_probe_device+0x60/0x16c)
[ 1.362515] [<80414e14>] (driver_probe_device) from [<80413088>] (bus_for_each_drv+0x74/0xb8)
[ 1.371199] [<80413088>] (bus_for_each_drv) from [<80414978>] (__device_attach+0xd0/0x138)
[ 1.379615] [<80414978>] (__device_attach) from [<80413e7c>] (bus_probe_device+0x84/0x8c)
[ 1.387949] [<80413e7c>] (bus_probe_device) from [<80411204>] (device_add+0x3a8/0x5e8)
[ 1.395968] [<80411204>] (device_add) from [<80476378>] (spi_add_device+0x9c/0x14c)
[ 1.403793] [<80476378>] (spi_add_device) from [<80476ec0>] (spi_register_controller+0x694/0xaec)
[ 1.412839] [<80476ec0>] (spi_register_controller) from [<80479ef8>] (dspi_probe+0x2cc/0x6a8)
[ 1.421528] [<80479ef8>] (dspi_probe) from [<8041675c>] (platform_drv_probe+0x48/0x9c)
[ 1.429599] [<8041675c>] (platform_drv_probe) from [<80414adc>] (really_probe+0xf4/0x2c8)
[ 1.437924] [<80414adc>] (really_probe) from [<80414e14>] (driver_probe_device+0x60/0x16c)
[ 1.446268] [<80414e14>] (driver_probe_device) from [<80414ffc>] (__driver_attach+0xdc/0xe0)
[ 1.454858] [<80414ffc>] (__driver_attach) from [<80412fb4>] (bus_for_each_dev+0x68/0xb4)
[ 1.463183] [<80412fb4>] (bus_for_each_dev) from [<8041407c>] (bus_add_driver+0x100/0x20c)
[ 1.471596] [<8041407c>] (bus_add_driver) from [<80415928>] (driver_register+0x78/0x10c)
[ 1.479844] [<80415928>] (driver_register) from [<801025ec>] (do_one_initcall+0x54/0x194)
[ 1.488184] [<801025ec>] (do_one_initcall) from [<80900e14>] (kernel_init_freeable+0x12c/0x1c8)
[ 1.496964] [<80900e14>] (kernel_init_freeable) from [<80627efc>] (kernel_init+0x8/0x110)
[ 1.505294] [<80627efc>] (kernel_init) from [<801010e8>] (ret_from_fork+0x14/0x2c)
[ 1.512984] Exception stack(0x86843fb0 to 0x86843ff8)
[ 1.518135] 3fa0: 00000000 00000000 00000000 00000000
[ 1.526377] 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 1.534666] 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000
[ 1.541380] ---[ end trace c38e2aa5992c4c9b ]---
[ 1.547533] ------------[ cut here ]------------
[ 1.552403] WARNING: CPU: 0 PID: 1 at /home/buildbot/worker/builddir_yocto/build/build/tmp/work-shared/col-vf50-proceq-mainline-next/kernel-source/drivers/spi/spidev.c:730 spidev_probe+0xe4/0x198
[ 1.569957] /soc/aips-bus@40000000/spi@4002c000/spidev@2: buggy DT: spidev listed directly in DT
[ 1.578854] Modules linked in:
[ 1.581973] CPU: 0 PID: 1 Comm: swapper Tainted: G W 5.0.0-rc2-next-20190118-g9673b4a #1
[ 1.591467] Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree)
[ 1.598058] [<8010df3c>] (unwind_backtrace) from [<8010b65c>] (show_stack+0x10/0x14)
[ 1.605885] [<8010b65c>] (show_stack) from [<8011a890>] (__warn+0xf8/0x110)
[ 1.612992] [<8011a890>] (__warn) from [<8011a8f0>] (warn_slowpath_fmt+0x48/0x6c)
[ 1.620642] [<8011a8f0>] (warn_slowpath_fmt) from [<80478800>] (spidev_probe+0xe4/0x198)
[ 1.628899] [<80478800>] (spidev_probe) from [<804754fc>] (spi_drv_probe+0x88/0xa0)
[ 1.636648] [<804754fc>] (spi_drv_probe) from [<80414adc>] (really_probe+0xf4/0x2c8)
[ 1.644542] [<80414adc>] (really_probe) from [<80414e14>] (driver_probe_device+0x60/0x16c)
[ 1.652963] [<80414e14>] (driver_probe_device) from [<80413088>] (bus_for_each_drv+0x74/0xb8)
[ 1.661643] [<80413088>] (bus_for_each_drv) from [<80414978>] (__device_attach+0xd0/0x138)
[ 1.670056] [<80414978>] (__device_attach) from [<80413e7c>] (bus_probe_device+0x84/0x8c)
[ 1.678389] [<80413e7c>] (bus_probe_device) from [<80411204>] (device_add+0x3a8/0x5e8)
[ 1.686408] [<80411204>] (device_add) from [<80476378>] (spi_add_device+0x9c/0x14c)
[ 1.694235] [<80476378>] (spi_add_device) from [<80476ec0>] (spi_register_controller+0x694/0xaec)
[ 1.703281] [<80476ec0>] (spi_register_controller) from [<80479ef8>] (dspi_probe+0x2cc/0x6a8)
[ 1.711978] [<80479ef8>] (dspi_probe) from [<8041675c>] (platform_drv_probe+0x48/0x9c)
[ 1.720054] [<8041675c>] (platform_drv_probe) from [<80414adc>] (really_probe+0xf4/0x2c8)
[ 1.728383] [<80414adc>] (really_probe) from [<80414e14>] (driver_probe_device+0x60/0x16c)
[ 1.736724] [<80414e14>] (driver_probe_device) from [<80414ffc>] (__driver_attach+0xdc/0xe0)
[ 1.745316] [<80414ffc>] (__driver_attach) from [<80412fb4>] (bus_for_each_dev+0x68/0xb4)
[ 1.753648] [<80412fb4>] (bus_for_each_dev) from [<8041407c>] (bus_add_driver+0x100/0x20c)
[ 1.762066] [<8041407c>] (bus_add_driver) from [<80415928>] (driver_register+0x78/0x10c)
[ 1.770308] [<80415928>] (driver_register) from [<801025ec>] (do_one_initcall+0x54/0x194)
[ 1.778653] [<801025ec>] (do_one_initcall) from [<80900e14>] (kernel_init_freeable+0x12c/0x1c8)
[ 1.787443] [<80900e14>] (kernel_init_freeable) from [<80627efc>] (kernel_init+0x8/0x110)
[ 1.795775] [<80627efc>] (kernel_init) from [<801010e8>] (ret_from_fork+0x14/0x2c)
[ 1.803470] Exception stack(0x86843fb0 to 0x86843ff8)
[ 1.808620] 3fa0: 00000000 00000000 00000000 00000000
[ 1.816860] 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 1.825148] 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000
[ 1.831863] ---[ end trace c38e2aa5992c4c9c ]---
[ 1.838204] ------------[ cut here ]------------
[ 1.842952] WARNING: CPU: 0 PID: 1 at /home/buildbot/worker/builddir_yocto/build/build/tmp/work-shared/col-vf50-proceq-mainline-next/kernel-source/drivers/spi/spidev.c:730 spidev_probe+0xe4/0x198
[ 1.860536] /soc/aips-bus@40000000/spi@4002c000/spidev@3: buggy DT: spidev listed directly in DT
[ 1.869437] Modules linked in:
[ 1.872561] CPU: 0 PID: 1 Comm: swapper Tainted: G W 5.0.0-rc2-next-20190118-g9673b4a #1
[ 1.882061] Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree)
[ 1.888658] [<8010df3c>] (unwind_backtrace) from [<8010b65c>] (show_stack+0x10/0x14)
[ 1.896492] [<8010b65c>] (show_stack) from [<8011a890>] (__warn+0xf8/0x110)
[ 1.903594] [<8011a890>] (__warn) from [<8011a8f0>] (warn_slowpath_fmt+0x48/0x6c)
[ 1.911236] [<8011a8f0>] (warn_slowpath_fmt) from [<80478800>] (spidev_probe+0xe4/0x198)
[ 1.919497] [<80478800>] (spidev_probe) from [<804754fc>] (spi_drv_probe+0x88/0xa0)
[ 1.927247] [<804754fc>] (spi_drv_probe) from [<80414adc>] (really_probe+0xf4/0x2c8)
[ 1.935146] [<80414adc>] (really_probe) from [<80414e14>] (driver_probe_device+0x60/0x16c)
[ 1.943568] [<80414e14>] (driver_probe_device) from [<80413088>] (bus_for_each_drv+0x74/0xb8)
[ 1.952246] [<80413088>] (bus_for_each_drv) from [<80414978>] (__device_attach+0xd0/0x138)
[ 1.960661] [<80414978>] (__device_attach) from [<80413e7c>] (bus_probe_device+0x84/0x8c)
[ 1.968997] [<80413e7c>] (bus_probe_device) from [<80411204>] (device_add+0x3a8/0x5e8)
[ 1.977020] [<80411204>] (device_add) from [<80476378>] (spi_add_device+0x9c/0x14c)
[ 1.984843] [<80476378>] (spi_add_device) from [<80476ec0>] (spi_register_controller+0x694/0xaec)
[ 1.993884] [<80476ec0>] (spi_register_controller) from [<80479ef8>] (dspi_probe+0x2cc/0x6a8)
[ 2.002581] [<80479ef8>] (dspi_probe) from [<8041675c>] (platform_drv_probe+0x48/0x9c)
[ 2.010655] [<8041675c>] (platform_drv_probe) from [<80414adc>] (really_probe+0xf4/0x2c8)
[ 2.018990] [<80414adc>] (really_probe) from [<80414e14>] (driver_probe_device+0x60/0x16c)
[ 2.027340] [<80414e14>] (driver_probe_device) from [<80414ffc>] (__driver_attach+0xdc/0xe0)
[ 2.035930] [<80414ffc>] (__driver_attach) from [<80412fb4>] (bus_for_each_dev+0x68/0xb4)
[ 2.044264] [<80412fb4>] (bus_for_each_dev) from [<8041407c>] (bus_add_driver+0x100/0x20c)
[ 2.052677] [<8041407c>] (bus_add_driver) from [<80415928>] (driver_register+0x78/0x10c)
[ 2.060921] [<80415928>] (driver_register) from [<801025ec>] (do_one_initcall+0x54/0x194)
[ 2.069251] [<801025ec>] (do_one_initcall) from [<80900e14>] (kernel_init_freeable+0x12c/0x1c8)
[ 2.078107] [<80900e14>] (kernel_init_freeable) from [<80627efc>] (kernel_init+0x8/0x110)
[ 2.086370] [<80627efc>] (kernel_init) from [<801010e8>] (ret_from_fork+0x14/0x2c)
[ 2.094056] Exception stack(0x86843fb0 to 0x86843ff8)
[ 2.099220] 3fa0: 00000000 00000000 00000000 00000000
[ 2.107465] 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 2.115756] 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000
[ 2.122466] ---[ end trace c38e2aa5992c4c9d ]---
[ 2.128725] ------------[ cut here ]------------
[ 2.133470] WARNING: CPU: 0 PID: 1 at /home/buildbot/worker/builddir_yocto/build/build/tmp/work-shared/col-vf50-proceq-mainline-next/kernel-source/drivers/spi/spidev.c:730 spidev_probe+0xe4/0x198
[ 2.151061] /soc/aips-bus@40000000/spi@4002c000/spidev@4: buggy DT: spidev listed directly in DT
[ 2.159966] Modules linked in:
[ 2.163086] CPU: 0 PID: 1 Comm: swapper Tainted: G W 5.0.0-rc2-next-20190118-g9673b4a #1
[ 2.172583] Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree)
[ 2.179185] [<8010df3c>] (unwind_backtrace) from [<8010b65c>] (show_stack+0x10/0x14)
[ 2.187017] [<8010b65c>] (show_stack) from [<8011a890>] (__warn+0xf8/0x110)
[ 2.194126] [<8011a890>] (__warn) from [<8011a8f0>] (warn_slowpath_fmt+0x48/0x6c)
[ 2.201774] [<8011a8f0>] (warn_slowpath_fmt) from [<80478800>] (spidev_probe+0xe4/0x198)
[ 2.210036] [<80478800>] (spidev_probe) from [<804754fc>] (spi_drv_probe+0x88/0xa0)
[ 2.217856] [<804754fc>] (spi_drv_probe) from [<80414adc>] (really_probe+0xf4/0x2c8)
[ 2.225685] [<80414adc>] (really_probe) from [<80414e14>] (driver_probe_device+0x60/0x16c)
[ 2.234100] [<80414e14>] (driver_probe_device) from [<80413088>] (bus_for_each_drv+0x74/0xb8)
[ 2.242775] [<80413088>] (bus_for_each_drv) from [<80414978>] (__device_attach+0xd0/0x138)
[ 2.251187] [<80414978>] (__device_attach) from [<80413e7c>] (bus_probe_device+0x84/0x8c)
[ 2.259524] [<80413e7c>] (bus_probe_device) from [<80411204>] (device_add+0x3a8/0x5e8)
[ 2.267550] [<80411204>] (device_add) from [<80476378>] (spi_add_device+0x9c/0x14c)
[ 2.275373] [<80476378>] (spi_add_device) from [<80476ec0>] (spi_register_controller+0x694/0xaec)
[ 2.284410] [<80476ec0>] (spi_register_controller) from [<80479ef8>] (dspi_probe+0x2cc/0x6a8)
[ 2.293100] [<80479ef8>] (dspi_probe) from [<8041675c>] (platform_drv_probe+0x48/0x9c)
[ 2.301174] [<8041675c>] (platform_drv_probe) from [<80414adc>] (really_probe+0xf4/0x2c8)
[ 2.309502] [<80414adc>] (really_probe) from [<80414e14>] (driver_probe_device+0x60/0x16c)
[ 2.317918] [<80414e14>] (driver_probe_device) from [<80414ffc>] (__driver_attach+0xdc/0xe0)
[ 2.326434] [<80414ffc>] (__driver_attach) from [<80412fb4>] (bus_for_each_dev+0x68/0xb4)
[ 2.334764] [<80412fb4>] (bus_for_each_dev) from [<8041407c>] (bus_add_driver+0x100/0x20c)
[ 2.343177] [<8041407c>] (bus_add_driver) from [<80415928>] (driver_register+0x78/0x10c)
[ 2.351421] [<80415928>] (driver_register) from [<801025ec>] (do_one_initcall+0x54/0x194)
[ 2.359764] [<801025ec>] (do_one_initcall) from [<80900e14>] (kernel_init_freeable+0x12c/0x1c8)
[ 2.368627] [<80900e14>] (kernel_init_freeable) from [<80627efc>] (kernel_init+0x8/0x110)
[ 2.376883] [<80627efc>] (kernel_init) from [<801010e8>] (ret_from_fork+0x14/0x2c)
[ 2.384575] Exception stack(0x86843fb0 to 0x86843ff8)
[ 2.389734] 3fa0: 00000000 00000000 00000000 00000000
[ 2.398027] 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 2.406264] 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000
[ 2.412967] ---[ end trace c38e2aa5992c4c9e ]---
[ 2.419612] libphy: Fixed MDIO Bus: probed
[ 2.426876] fec 400d1000.ethernet: Linked as a consumer to regulator.1
[ 2.436822] mdio_bus 400d1000.ethernet-1:00: error -2 loading PHY driver module for ID 0x00221513
[ 2.446492] fec 400d1000.ethernet: Dropping the link to regulator.1
[ 2.453260] fec: probe of 400d1000.ethernet failed with error -2
[ 2.459709] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.466933] usbcore: registered new interface driver usb-storage
[ 2.473532] usbcore: registered new interface driver usbserial_generic
[ 2.480428] usbserial: USB Serial support registered for generic
[ 2.486650] usbcore: registered new interface driver ftdi_sio
[ 2.492700] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 2.500320] usbcore: registered new interface driver pl2303
[ 2.506082] usbserial: USB Serial support registered for pl2303
[ 2.525021] snvs_rtc 400a7000.snvs:snvs-rtc-lp: registered as rtc0
[ 2.531781] i2c /dev entries driver
[ 2.540977] imx2-wdt 4003e000.wdog: timeout 60 sec (nowayout=0)
[ 2.548484] sdhci: Secure Digital Host Controller Interface driver
[ 2.554735] sdhci: Copyright(c) Pierre Ossman
[ 2.559229] sdhci-pltfm: SDHCI platform and OF driver helper
[ 2.569219] vf610-adc 4003b000.adc: Linked as a consumer to regulator.2
[ 2.580198] vf610-adc 400bb000.adc: Linked as a consumer to regulator.2
[ 2.593053] NET: Registered protocol family 17
[ 2.598082] Key type dns_resolver registered
[ 2.602654] Registering SWP/SWPB emulation handler
[ 2.609759] registered taskstats version 1
[ 2.613931] Loading compiled-in X.509 certificates
[ 2.622487] regulator-usbh-vbus GPIO handle specifies active low - ignored
[ 2.629816] VCC_USB[1-4]: supplied by 5V
[ 2.635206] imx_usb 400b4000.usb: Linked as a consumer to regulator.5
[ 2.646283] ci_hdrc ci_hdrc.1: EHCI Host Controller
[ 2.651476] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1
[ 2.687869] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
[ 2.695929] hub 1-0:1.0: USB hub found
[ 2.700037] hub 1-0:1.0: 1 port detected
[ 2.708080] ubi0: default fastmap pool size: 25
[ 2.712696] ubi0: default fastmap WL pool size: 12
[ 2.717524] ubi0: attaching mtd3
[ 2.757908] random: fast init done
[ 2.991776] ubi0: scanning is finished
[ 3.006718] ubi0: attached mtd3 (name "ubi1", size 62 MiB)
[ 3.012422] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 3.019422] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 3.026260] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 3.033315] ubi0: good PEBs: 501, bad PEBs: 1, corrupted PEBs: 0
[ 3.039418] ubi0: user volume: 5, internal volumes: 1, max. volumes count: 128
[ 3.046694] ubi0: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 0
[ 3.055148] ubi0: available PEBs: 0, total reserved PEBs: 501, PEBs reserved for bad PEB handling: 19
[ 3.064519] ubi0: background thread "ubi_bgt0d" started, PID 69
[ 3.072417] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[ 3.081432] snvs_rtc 400a7000.snvs:snvs-rtc-lp: setting system clock to 1970-01-01T00:00:00 UTC (0)
[ 3.227857] usb 1-1: new high-speed USB device number 2 using ci_hdrc
[ 15.608166] +V3.3: disabling
[ 15.611144] 3.3V: disabling
[ 15.614964] Root-NFS: no NFS server address
[ 15.619353] VFS: Unable to mount root fs via NFS, trying floppy.
[ 15.626762] VFS: Cannot open root device "nfs" or unknown-block(2,0): error -6
[ 15.634252] Please append a correct "root=" boot option; here are the available partitions:
[ 15.642791] 0100 16384 ram0
[ 15.642804] (driver?)
[ 15.649076] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(2,0)
[ 15.657423] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(2,0) ]---
[-- Attachment #3: bisect_vf_defconfig --]
[-- Type: application/octet-stream, Size: 6264 bytes --]
CONFIG_KERNEL_LZO=y
CONFIG_SYSVIPC=y
CONFIG_NO_HZ_IDLE=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_PREEMPT_VOLUNTARY=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_CGROUPS=y
CONFIG_NAMESPACES=y
CONFIG_BLK_DEV_INITRD=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
# CONFIG_RD_XZ is not set
CONFIG_KALLSYMS_ALL=y
CONFIG_EMBEDDED=y
CONFIG_PERF_EVENTS=y
# CONFIG_SLUB_DEBUG is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_ARCH_MXC=y
CONFIG_SOC_VF610=y
CONFIG_ARCH_VEXPRESS=y
CONFIG_SWP_EMULATE=y
CONFIG_VMSPLIT_2G=y
CONFIG_KEXEC=y
# CONFIG_ATAGS_PROC is not set
CONFIG_CPU_IDLE=y
CONFIG_VFP=y
CONFIG_NEON=y
CONFIG_KERNEL_MODE_NEON=y
CONFIG_PM_WAKELOCKS=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_BINFMT_MISC=y
# CONFIG_COREDUMP is not set
CONFIG_CMA=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_DIAG is not set
# CONFIG_IPV6 is not set
CONFIG_BRIDGE=y
# CONFIG_BRIDGE_IGMP_SNOOPING is not set
CONFIG_WIRELESS_EXT_OUT_OF_TREE=y
CONFIG_CFG80211=m
CONFIG_MAC80211=m
CONFIG_RFKILL=y
CONFIG_RFKILL_INPUT=y
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_STANDALONE is not set
CONFIG_DMA_CMA=y
CONFIG_CONNECTOR=y
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PHYSMAP_OF=y
CONFIG_MTD_BLOCK2MTD=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_VF610_NFC=y
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_FASTMAP=y
CONFIG_MTD_UBI_BLOCK=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=1
CONFIG_BLK_DEV_RAM_SIZE=16384
CONFIG_VIRTIO_BLK=y
CONFIG_SCSI=y
# CONFIG_SCSI_PROC_FS is not set
CONFIG_BLK_DEV_SD=y
CONFIG_SCSI_SCAN_ASYNC=y
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_NETDEVICES=y
CONFIG_VIRTIO_NET=y
# CONFIG_NET_VENDOR_ARC is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_CIRRUS is not set
# CONFIG_NET_VENDOR_EZCHIP is not set
# CONFIG_NET_VENDOR_FARADAY is not set
# CONFIG_NET_VENDOR_HISILICON is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_QUALCOMM is not set
# CONFIG_NET_VENDOR_RENESAS is not set
# CONFIG_NET_VENDOR_ROCKER is not set
# CONFIG_NET_VENDOR_SAMSUNG is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SMSC is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SYNOPSYS is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_MICREL_PHY=y
CONFIG_USB_NET_DRIVERS=m
CONFIG_USB_RTL8152=m
CONFIG_USB_USBNET=m
# CONFIG_USB_NET_CDC_NCM is not set
# CONFIG_USB_NET_NET1080 is not set
# CONFIG_USB_NET_CDC_SUBSET is not set
# CONFIG_USB_NET_ZAURUS is not set
# CONFIG_ATH9K_BTCOEX_SUPPORT is not set
CONFIG_ATH9K_HTC=m
# CONFIG_RTL_CARDS is not set
CONFIG_INPUT_POLLDEV=y
CONFIG_INPUT_EVDEV=y
# CONFIG_KEYBOARD_ATKBD is not set
CONFIG_KEYBOARD_GPIO=y
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_FSL_LPUART=y
CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
CONFIG_VIRTIO_CONSOLE=y
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_VIRTIO=y
CONFIG_I2C=y
# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MUX=y
# CONFIG_I2C_HELPER_AUTO is not set
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_IMX=y
CONFIG_SPI=y
CONFIG_SPI_FSL_DSPI=y
CONFIG_SPI_SPIDEV=y
CONFIG_GPIO_SYSFS=y
CONFIG_POWER_RESET_GPIO=y
CONFIG_POWER_RESET_GPIO_RESTART=y
CONFIG_POWER_RESET_SYSCON=y
CONFIG_BATTERY_BQ27XXX=y
CONFIG_SENSORS_IIO_HWMON=y
CONFIG_WATCHDOG=y
CONFIG_IMX2_WDT=y
CONFIG_REGULATOR_ANATOP=y
CONFIG_REGULATOR_GPIO=y
# CONFIG_HID is not set
# CONFIG_USB_HID is not set
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_ACM=m
CONFIG_USB_STORAGE=y
CONFIG_USB_CHIPIDEA=y
CONFIG_USB_CHIPIDEA_UDC=y
CONFIG_USB_CHIPIDEA_HOST=y
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_FTDI_SIO=y
CONFIG_USB_SERIAL_PL2303=y
CONFIG_USB_SERIAL_OPTION=m
CONFIG_NOP_USB_XCEIV=y
CONFIG_USB_MXS_PHY=y
CONFIG_USB_GADGET=y
CONFIG_USB_FSL_USB2=y
CONFIG_USB_CONFIGFS=m
CONFIG_USB_CONFIGFS_SERIAL=y
CONFIG_USB_CONFIGFS_ACM=y
CONFIG_USB_CONFIGFS_OBEX=y
CONFIG_USB_CONFIGFS_NCM=y
CONFIG_USB_CONFIGFS_ECM=y
CONFIG_USB_CONFIGFS_RNDIS=y
CONFIG_USB_CONFIGFS_EEM=y
CONFIG_USB_CONFIGFS_F_FS=y
CONFIG_USB_CONFIGFS_F_HID=y
CONFIG_MMC=y
CONFIG_MMC_ARMMMCI=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_ESDHC_IMX=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_PWM=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_ONESHOT=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_LEDS_TRIGGER_PATTERN=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_SNVS=y
CONFIG_DMADEVICES=y
CONFIG_FSL_EDMA=y
# CONFIG_MX3_IPU is not set
CONFIG_VIRTIO_MMIO=y
CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_EXTCON_USB_GPIO=y
CONFIG_IIO=y
CONFIG_VF610_ADC=y
CONFIG_VF610_DAC=y
CONFIG_IIO_SYSFS_TRIGGER=y
CONFIG_PWM=y
CONFIG_PWM_FSL_FTM=y
CONFIG_NVMEM_VF610_OCOTP=y
CONFIG_EXT4_FS=y
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=y
CONFIG_CUSE=y
CONFIG_VFAT_FS=y
CONFIG_NTFS_FS=y
CONFIG_NTFS_RW=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_UBIFS_FS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V2 is not set
# CONFIG_NFS_V3 is not set
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
CONFIG_NLS_DEFAULT="cp437"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_UTF8=y
CONFIG_SECURITYFS=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_CMAC=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_HW is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC_T10DIF=y
CONFIG_XZ_DEC=y
CONFIG_PRINTK_TIME=y
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=2
# CONFIG_SCHED_DEBUG is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_FTRACE is not set
CONFIG_DEBUG_USER=y
next reply other threads:[~2019-01-18 8:39 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-18 8:39 Krzysztof Kozlowski [this message]
2019-01-18 8:48 ` [BUG bisect] Missing Micrel driver on VF50 (net: phy: check return code when requesting PHY driver module) Krzysztof Kozlowski
2019-01-18 20:58 ` Heiner Kallweit
2019-01-18 21:30 ` Heiner Kallweit
2019-01-19 9:51 ` Krzysztof Kozlowski
2019-01-22 13:51 ` Geert Uytterhoeven
2019-01-22 14:22 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAJKOXPdHhUGoQmrX8_23MfbibozipkAzXA_5woVSFJSK9BvbXw@mail.gmail.com \
--to=krzk@kernel.org \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=hkallweit1@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=stefan@agner.ch \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).