netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Arnd Bergmann <arnd@arndb.de>
To: "Máté Eckl" <ecklm94@gmail.com>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>,
	Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>,
	Florian Westphal <fw@strlen.de>,
	"David S. Miller" <davem@davemloft.net>,
	Flavio Leitner <fbl@redhat.com>,
	netfilter-devel@vger.kernel.org, coreteam@netfilter.org,
	Networking <netdev@vger.kernel.org>,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] netfilter: NFT_SOCKET don't use NF_SOCKET_IPV6 without NF_TABLES_IPV6
Date: Tue, 10 Jul 2018 11:10:40 +0200	[thread overview]
Message-ID: <CAK8P3a0zYmdoMdWdFDcWprZY_4w2hbMYq4--iZB=JE4x2UiscA@mail.gmail.com> (raw)
In-Reply-To: <20180710080538.d7xqpjdvpksfrx6o@sch.bme.hu>

On Tue, Jul 10, 2018 at 10:05 AM, Máté Eckl <ecklm94@gmail.com> wrote:
> On Tue, Jul 10, 2018 at 10:02:27AM +0200, Máté Eckl wrote:
>> On Mon, Jul 09, 2018 at 11:35:09PM +0200, Arnd Bergmann wrote:
>> > It is now possible to build the nft_socket module as built-in when
>> > NF_TABLES_IPV6 is disabled, and have NF_SOCKET_IPV6=m set manually.
>> >
>> > In this case, the NF_SOCKET_IPV6 functionality will be useless according
>> > to the explanation in commit 35bf1ccecaaa ("netfilter: Kconfig: Change
>> > IPv6 select dependencies"), but on top of that it also causes a link
>> > error:
>> >
>> > net/netfilter/nft_socket.o: In function `nft_socket_eval':
>> > nft_socket.c:(.text+0x162): undefined reference to `nf_sk_lookup_slow_v6'
>> >
>> > This changes the compile-time check so we don't attempt to use
>> > the NF_SOCKET_IPV6 code when it cannot be used, and make it all
>> > compile again. That may lead to unexpected behavior when a user
>> > enables NF_SOCKET_IPV6 but cannot use it, but seems to be the
>> > logical conclusion of the 35bf1ccecaaa change.
>> >
>> > Fixes: 35bf1ccecaaa ("netfilter: Kconfig: Change IPv6 select dependencies")
>> > Signed-off-by: Arnd Bergmann <arnd@arndb.de>
>>
>> I think this should be fixed in the Kconfig rather than inside the module(s).

Should we revert your patch then, or do you have a better idea?

>> I did some investigation and it turns out that you missed a circumstance. This
>> link error occures only if NFT_SOCKET=y && NF_SOCKET_IPV6=m && NF_TABLES_IPV6=y
>> (cannot be m here if NFT_SOCKET is y).

No, if NF_TABLES_IPV6=y the problem cannot happen, since NFT_SOCKET then
selects NF_SOCKET_IPV6=y as well. Before your patch, it would always select
NF_SOCKET_IPV6 when it could, so it worked in all configurations.

>>  And probably the same with
>> iptables-related modules. Probably this possibility should be eliminated.
>
> NF_TPROXY_IPV6 might be in the same situation.

I tried coming up with a combination that is broken for NF_TPROXY_IPV6=m
but could not. From what I can see with

config NETFILTER_XT_TARGET_TPROXY
       tristate '"TPROXY" target transparent proxying support'
       depends on IP6_NF_IPTABLES || IP6_NF_IPTABLES=n
       select NF_TPROXY_IPV6 if IP6_NF_IPTABLES

and

#if IS_ENABLED(CONFIG_IP6_NF_IPTABLES)

inside of net/netfilter/xt_TPROXY.c, there is no way we can end up with
xt_TPROXY calling into the nf_tproxy_ipv6 loadable module from
a built-in context. This is the same approach I used in my patch,
just with IP6_NF_IPTABLES instead of NF_SOCKET_IPV6, in both
the Kconfig dependency and the module.

      Arnd

  reply	other threads:[~2018-07-10  9:10 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-07-09 21:35 [PATCH] netfilter: NFT_SOCKET don't use NF_SOCKET_IPV6 without NF_TABLES_IPV6 Arnd Bergmann
2018-07-10  8:02 ` Máté Eckl
2018-07-10  8:05   ` Máté Eckl
2018-07-10  9:10     ` Arnd Bergmann [this message]
2018-07-10  9:51       ` Máté Eckl
2018-07-10 10:56       ` Pablo Neira Ayuso
2018-07-10 11:15         ` Máté Eckl
2018-07-10 11:24           ` Pablo Neira Ayuso
2018-07-10 11:45             ` Máté Eckl
2018-07-10 12:14               ` Pablo Neira Ayuso

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAK8P3a0zYmdoMdWdFDcWprZY_4w2hbMYq4--iZB=JE4x2UiscA@mail.gmail.com' \
    --to=arnd@arndb.de \
    --cc=coreteam@netfilter.org \
    --cc=davem@davemloft.net \
    --cc=ecklm94@gmail.com \
    --cc=fbl@redhat.com \
    --cc=fw@strlen.de \
    --cc=kadlec@blackhole.kfki.hu \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=netfilter-devel@vger.kernel.org \
    --cc=pablo@netfilter.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).