netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Geert Uytterhoeven <geert@linux-m68k.org>
To: "Niklas Söderlund" <niklas.soderlund+renesas@ragnatech.se>
Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>,
	Simon Horman <horms+renesas@verge.net.au>,
	"netdev@vger.kernel.org" <netdev@vger.kernel.org>,
	Linux-Renesas <linux-renesas-soc@vger.kernel.org>
Subject: Re: [PATCH] sh_eth: add wake-on-lan support via magic packet
Date: Wed, 7 Dec 2016 19:14:40 +0100	[thread overview]
Message-ID: <CAMuHMdVK1DtJMajqD-eZ82QSP2ZRozwaR4zNc0ae1YT21Exq0w@mail.gmail.com> (raw)
In-Reply-To: <20161207162843.4731-1-niklas.soderlund+renesas@ragnatech.se>

Hi Niklas,

On Wed, Dec 7, 2016 at 5:28 PM, Niklas Söderlund
<niklas.soderlund+renesas@ragnatech.se> wrote:
> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>

Thanks, works fine on r8a7791/koelsch!

Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>

> --- a/drivers/net/ethernet/renesas/sh_eth.c
> +++ b/drivers/net/ethernet/renesas/sh_eth.c
> @@ -624,7 +624,7 @@ static struct sh_eth_cpu_data r8a779x_data = {
>
>         .register_type  = SH_ETH_REG_FAST_RCAR,
>
> -       .ecsr_value     = ECSR_PSRTO | ECSR_LCHNG | ECSR_ICD,
> +       .ecsr_value     = ECSR_PSRTO | ECSR_LCHNG | ECSR_ICD | ECSR_MPD,

Interestingly, the ECSR_MPD bit is already set for several SoCs.

Hence adding ".magic = 1" to the entry for r8a7740 instantly gave me working
WoL support on r8a7740/armadillo. Cool!

> --- a/drivers/net/ethernet/renesas/sh_eth.h
> +++ b/drivers/net/ethernet/renesas/sh_eth.h
> @@ -493,6 +493,7 @@ struct sh_eth_cpu_data {
>         unsigned shift_rd0:1;   /* shift Rx descriptor word 0 right by 16 */
>         unsigned rmiimode:1;    /* EtherC has RMIIMODE register */
>         unsigned rtrate:1;      /* EtherC has RTRATE register */
> +       unsigned magic:1;       /* EtherC have PMDE in ECMR and MPDIP in ECSIPR */

Instead of adding a new flag, perhaps you can just check for the ECSR_MPD flag
in ecsr_value?

> @@ -529,6 +530,9 @@ struct sh_eth_private {
>         unsigned no_ether_link:1;
>         unsigned ether_link_active_low:1;
>         unsigned is_opened:1;
> +
> +       bool wol_enabled;

"unsigned wol_enabled:1", to merge with the bitfield above?

> +       struct clk *clk;

It's a good practice to keep all pointers at the top of the struct, to avoid
gaps due to alignment restrictions, especially on 64-bit (I know that's not
the case here).

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

  reply	other threads:[~2016-12-07 18:14 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-12-07 16:28 [PATCH] sh_eth: add wake-on-lan support via magic packet Niklas Söderlund
2016-12-07 18:14 ` Geert Uytterhoeven [this message]
2016-12-08  7:16   ` Niklas Söderlund
2016-12-08 13:22     ` Simon Horman
2016-12-08 15:01       ` Niklas Söderlund
2016-12-08 15:31         ` Simon Horman
2016-12-08 12:28 ` Sergei Shtylyov
2016-12-08 14:56   ` Niklas Söderlund
2016-12-08 15:13     ` Geert Uytterhoeven
2016-12-10 21:25     ` Sergei Shtylyov
2016-12-12 15:49       ` Niklas Söderlund
2016-12-12 17:35         ` Sergei Shtylyov
2016-12-08 16:29   ` Sergei Shtylyov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CAMuHMdVK1DtJMajqD-eZ82QSP2ZRozwaR4zNc0ae1YT21Exq0w@mail.gmail.com \
    --to=geert@linux-m68k.org \
    --cc=horms+renesas@verge.net.au \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=niklas.soderlund+renesas@ragnatech.se \
    --cc=sergei.shtylyov@cogentembedded.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).