From: Roopa Prabhu <roprabhu@cisco.com>
To: John Fastabend <john.r.fastabend@intel.com>
Cc: <netdev@vger.kernel.org>, <mst@redhat.com>
Subject: Re: [RFC PATCH] macvlan: add FDB bridge ops
Date: Wed, 28 Mar 2012 08:43:56 -0700 [thread overview]
Message-ID: <CB987FCC.4A654%roprabhu@cisco.com> (raw)
In-Reply-To: <20120321002647.16118.87199.stgit@jf-dev1-dcblab>
On 3/20/12 5:26 PM, "John Fastabend" <john.r.fastabend@intel.com> wrote:
> Add support to add/del and dump the forwarding database
> for macvlan passthru mode. The macvlan driver acts like
> a Two Port Mac Relay (TPMR 802.1Q-2011) in the passthru
> case so adding forwarding rules is just adding the addr
> to the uc or mc lists.
>
> By default the passthru mode puts the lowerdev into a
> promiscuous mode to receive all packets. This behavior
> is not changed by this patch. This is a bit problematic
> and needs to be solved without IMHO breaking existing
> mechanics. Maybe on the first add_fdb we can decrement
> the promisc mode? That seems to work reasonable well and
> keep existing functionality in place... but requires
> an initial add to set things up which is a bit annoying
> so maybe a flag is better. I haven't thought too hard
> about it yet so any ideas welcome
>
> This patch is a result of Roopa Prabhu's work. Follow up
> patches are needed for VEPA and VEB macvlan modes.
>
> Only lightly touch tested at this point.
>
> CC: Roopa Prabhu <roprabhu@cisco.com>
> Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
> ---
>
> drivers/net/macvlan.c | 42 ++++++++++++++++++++++++++++++++++++++++++
> 1 files changed, 42 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c
> index f975afd..86af56b 100644
> --- a/drivers/net/macvlan.c
> +++ b/drivers/net/macvlan.c
> @@ -349,6 +349,7 @@ static int macvlan_stop(struct net_device *dev)
> goto hash_del;
> }
>
> + dev_uc_unsync(lowerdev, dev);
> dev_mc_unsync(lowerdev, dev);
> if (dev->flags & IFF_ALLMULTI)
> dev_set_allmulti(lowerdev, -1);
> @@ -403,6 +404,7 @@ static void macvlan_set_multicast_list(struct net_device
> *dev)
> {
> struct macvlan_dev *vlan = netdev_priv(dev);
>
> + dev_uc_sync(vlan->lowerdev, dev);
> dev_mc_sync(vlan->lowerdev, dev);
> }
>
> @@ -542,6 +544,43 @@ static int macvlan_vlan_rx_kill_vid(struct net_device
> *dev,
> return 0;
> }
>
> +static int macvlan_fdb_add(struct ndmsg *ndm,
> + struct net_device *dev,
> + unsigned char *addr,
> + u16 flags)
> +{
> + struct macvlan_dev *vlan = netdev_priv(dev);
> + int err = -EINVAL;
> +
> + if (!vlan->port->passthru)
> + return -EOPNOTSUPP;
> +
> + if (is_unicast_ether_addr(addr))
> + err = dev_uc_add(dev, addr);
> + else if (is_multicast_ether_addr(addr))
> + err = dev_mc_add(dev, addr);
> +
> + return err;
> +}
> +
> +static int macvlan_fdb_del(struct ndmsg *ndm,
> + struct net_device *dev,
> + unsigned char *addr)
> +{
> + struct macvlan_dev *vlan = netdev_priv(dev);
> + int err = -EINVAL;
> +
> + if (!vlan->port->passthru)
> + return -EOPNOTSUPP;
> +
> + if (is_unicast_ether_addr(addr))
> + err = dev_uc_del(dev, addr);
> + else if (is_multicast_ether_addr(addr))
> + err = dev_mc_del(dev, addr);
> +
> + return err;
> +}
> +
> static void macvlan_ethtool_get_drvinfo(struct net_device *dev,
> struct ethtool_drvinfo *drvinfo)
> {
> @@ -577,6 +616,9 @@ static const struct net_device_ops macvlan_netdev_ops = {
> .ndo_validate_addr = eth_validate_addr,
> .ndo_vlan_rx_add_vid = macvlan_vlan_rx_add_vid,
> .ndo_vlan_rx_kill_vid = macvlan_vlan_rx_kill_vid,
> + .ndo_fdb_add = macvlan_fdb_add,
> + .ndo_fdb_del = macvlan_fdb_del,
> + .ndo_fdb_dump = ndo_dflt_fdb_dump,
> };
>
> void macvlan_common_setup(struct net_device *dev)
>
Thanks John. Looks good.
I added a few things to your patch below. Yes, I think the promisc check is
required. Made an attempt to add a flag below (I did not get a chance to
think about other approaches there too). Briefly tested it with the br
command.
diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c
index f975afd..9bc70ad 100644
--- a/drivers/net/macvlan.c
+++ b/drivers/net/macvlan.c
@@ -34,6 +34,9 @@
#define MACVLAN_HASH_SIZE (1 << BITS_PER_BYTE)
+/* macvlan port flags */
+#define MACVLAN_FLAG_PROMISC 0x1
+
struct macvlan_port {
struct net_device *dev;
struct hlist_head vlan_hash[MACVLAN_HASH_SIZE];
@@ -41,6 +44,7 @@ struct macvlan_port {
struct rcu_head rcu;
bool passthru;
int count;
+ unsigned int flags;
};
static void macvlan_port_destroy(struct net_device *dev);
@@ -313,6 +317,7 @@ static int macvlan_open(struct net_device *dev)
if (vlan->port->passthru) {
dev_set_promiscuity(lowerdev, 1);
+ vlan->port->flags |= MACVLAN_FLAG_PROMISC;
goto hash_add;
}
@@ -345,10 +350,14 @@ static int macvlan_stop(struct net_device *dev)
struct net_device *lowerdev = vlan->lowerdev;
if (vlan->port->passthru) {
- dev_set_promiscuity(lowerdev, -1);
+ if (vlan->port->flags & MACVLAN_FLAG_PROMISC) {
+ dev_set_promiscuity(lowerdev, -1);
+ vlan->port->flags &= ~MACVLAN_FLAG_PROMISC;
+ }
goto hash_del;
}
+ dev_uc_unsync(lowerdev, dev);
dev_mc_unsync(lowerdev, dev);
if (dev->flags & IFF_ALLMULTI)
dev_set_allmulti(lowerdev, -1);
@@ -403,6 +412,7 @@ static void macvlan_set_multicast_list(struct net_device
*dev)
{
struct macvlan_dev *vlan = netdev_priv(dev);
+ dev_uc_sync(vlan->lowerdev, dev);
dev_mc_sync(vlan->lowerdev, dev);
}
@@ -542,6 +552,58 @@ static int macvlan_vlan_rx_kill_vid(struct net_device
*dev,
return 0;
}
+static int macvlan_fdb_add(struct ndmsg *ndm,
+ struct net_device *dev,
+ unsigned char *addr,
+ u16 flags)
+{
+ struct macvlan_dev *vlan = netdev_priv(dev);
+ struct net_device *lowerdev = vlan->lowerdev;
+ const struct net_device_ops *ops = lowerdev->netdev_ops;
+ int err = -EINVAL;
+
+ if (!vlan->port->passthru)
+ return -EOPNOTSUPP;
+
+ if (vlan->port->flags & MACVLAN_FLAG_PROMISC) {
+ dev_set_promiscuity (lowerdev, -1);
+ vlan->port->flags &= ~MACVLAN_FLAG_PROMISC;
+ }
+
+ if (ops->ndo_fdb_add)
+ return ops->ndo_fdb_add(ndm, lowerdev, addr, flags);
+
+ if (is_unicast_ether_addr(addr))
+ err = dev_uc_add_excl(lowerdev, addr);
+ else if (is_multicast_ether_addr(addr))
+ err = dev_mc_add(lowerdev, addr);
+
+ return err;
+}
+
+static int macvlan_fdb_del(struct ndmsg *ndm,
+ struct net_device *dev,
+ unsigned char *addr)
+{
+ struct macvlan_dev *vlan = netdev_priv(dev);
+ struct net_device *lowerdev = vlan->lowerdev;
+ const struct net_device_ops *ops = lowerdev->netdev_ops;
+ int err = -EINVAL;
+
+ if (!vlan->port->passthru)
+ return -EOPNOTSUPP;
+
+ if (ops->ndo_fdb_del)
+ return ops->ndo_fdb_del(ndm, lowerdev, addr);
+
+ if (is_unicast_ether_addr(addr))
+ err = dev_uc_del(lowerdev, addr);
+ else if (is_multicast_ether_addr(addr))
+ err = dev_mc_del(lowerdev, addr);
+
+ return err;
+}
+
static void macvlan_ethtool_get_drvinfo(struct net_device *dev,
struct ethtool_drvinfo *drvinfo)
{
@@ -577,6 +639,9 @@ static const struct net_device_ops macvlan_netdev_ops =
{
.ndo_validate_addr = eth_validate_addr,
.ndo_vlan_rx_add_vid = macvlan_vlan_rx_add_vid,
.ndo_vlan_rx_kill_vid = macvlan_vlan_rx_kill_vid,
+ .ndo_fdb_add = macvlan_fdb_add,
+ .ndo_fdb_del = macvlan_fdb_del,
+ .ndo_fdb_dump = ndo_dflt_fdb_dump,
};
void macvlan_common_setup(struct net_device *dev)
next prev parent reply other threads:[~2012-03-28 15:43 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-03-21 0:26 [RFC PATCH] macvlan: add FDB bridge ops John Fastabend
2012-03-21 8:34 ` Michael S. Tsirkin
2012-03-28 15:43 ` Roopa Prabhu [this message]
2012-03-28 15:52 ` Michael S. Tsirkin
2012-03-28 15:58 ` John Fastabend
2012-03-29 21:26 ` Roopa Prabhu
2012-03-30 1:06 ` John Fastabend
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CB987FCC.4A654%roprabhu@cisco.com \
--to=roprabhu@cisco.com \
--cc=john.r.fastabend@intel.com \
--cc=mst@redhat.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).