Re: [PATCH] ar5523: check endpoints type and direction in probe()

["Mazin Al Haddad" <mazinalhaddad05@gmail.com>]

On Wed Aug 24, 2022 at 9:04 AM +03, Greg KH wrote:
> On Wed, Aug 24, 2022 at 01:24:38AM +0300, Mazin Al Haddad wrote:
> > Fixes a bug reported by syzbot, where a warning occurs in usb_submit_urb()
> > due to the wrong endpoint type. There is no check for both the number
> > of endpoints and the type which causes an error as the code tries to
> > send a URB to the wrong endpoint.
> > 
> > Fix it by adding a check for the number of endpoints and the
> > direction/type of the endpoints. If the endpoints do not match the 
> > expected configuration -ENODEV is returned.
> > 
> > Syzkaller report:
> > 
> > usb 1-1: BOGUS urb xfer, pipe 3 != type 1
> > WARNING: CPU: 1 PID: 71 at drivers/usb/core/urb.c:502 usb_submit_urb+0xed2/0x18a0 drivers/usb/core/urb.c:502
> > Modules linked in:
> > CPU: 1 PID: 71 Comm: kworker/1:2 Not tainted 5.19.0-rc7-syzkaller-00150-g32f02a211b0a #0
> > Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 06/29/2022
> > Workqueue: usb_hub_wq hub_event
> > Call Trace:
> >  <TASK>
> >  ar5523_cmd+0x420/0x790 drivers/net/wireless/ath/ar5523/ar5523.c:275
> >  ar5523_cmd_read drivers/net/wireless/ath/ar5523/ar5523.c:302 [inline]
> >  ar5523_host_available drivers/net/wireless/ath/ar5523/ar5523.c:1376 [inline]
> >  ar5523_probe+0xc66/0x1da0 drivers/net/wireless/ath/ar5523/ar5523.c:1655
> > 
> > 
> > Link: https://syzkaller.appspot.com/bug?extid=1bc2c2afd44f820a669f
> > Reported-and-tested-by: syzbot+1bc2c2afd44f820a669f@syzkaller.appspotmail.com
> > Signed-off-by: Mazin Al Haddad <mazinalhaddad05@gmail.com>
> > ---
> >  drivers/net/wireless/ath/ar5523/ar5523.c | 31 ++++++++++++++++++++++++
> >  1 file changed, 31 insertions(+)
> > 
> > diff --git a/drivers/net/wireless/ath/ar5523/ar5523.c b/drivers/net/wireless/ath/ar5523/ar5523.c
> > index 6f937d2cc126..5451bf9ab9fb 100644
> > --- a/drivers/net/wireless/ath/ar5523/ar5523.c
> > +++ b/drivers/net/wireless/ath/ar5523/ar5523.c
> > @@ -1581,8 +1581,39 @@ static int ar5523_probe(struct usb_interface *intf,
> >  	struct usb_device *dev = interface_to_usbdev(intf);
> >  	struct ieee80211_hw *hw;
> >  	struct ar5523 *ar;
> > +	struct usb_host_interface *host = intf->cur_altsetting;
> >  	int error = -ENOMEM;
> >  
> > +	if (host->desc.bNumEndpoints != 4) {
> > +		dev_err(&dev->dev, "Wrong number of endpoints\n");
> > +		return -ENODEV;
> > +	}
> > +
> > +	for (int i = 0; i < host->desc.bNumEndpoints; ++i) {
> > +		struct usb_endpoint_descriptor *ep = &host->endpoint[i].desc;
> > +		// Check for type of endpoint and direction.
> > +		switch (i) {
> > +		case 0:
> > +		case 1:
> > +			if ((ep->bEndpointAddress & USB_DIR_OUT) &&
> > +			    ((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
> > +			     == USB_ENDPOINT_XFER_BULK)){
>
> Did you run your change through checkpatch?

Yes.

> We have usb helper functions for all of this, why not use them instead
> of attempting to roll your own?

Using the helpers is indeed a lot better. I wasn't aware of all of them.
Since find_common_endpoints() won't work here, I used the helpers for 
checking direction/type. 

I'll send v3 now. If there are any more changes that you feel
are necessary please let me know, I'll be happy to incorporate them. 

Thanks!