From: "Luca Weiss" <luca.weiss@fairphone.com>
To: <hexlabsecurity@proton.me>, "David Heidelberg" <david@ixit.cz>
Cc: <linux-kernel@vger.kernel.org>,
"Robert Dolca" <robert.dolca@intel.com>, <netdev@vger.kernel.org>,
<oe-linux-nfc@lists.linux.dev>,
"Samuel Ortiz" <sameo@linux.intel.com>,
"Kang Chen" <void0red@gmail.com>
Subject: Re: [PATCH] nfc: fdp: reject an oversized device-reported packet length
Date: Mon, 16 Nov 2026 10:57:48 +0100 [thread overview]
Message-ID: <DMWJOF3M99U0.3G5IY77AS4CWQ@fairphone.com> (raw)
In-Reply-To: <20260615-b4-disp-f42dce2d-v1-1-186ff3dcbf37@proton.me>
On Mon Jun 15, 2026 at 10:04 AM CEST, Bryam Vargas via B4 Relay wrote:
> From: Bryam Vargas <hexlabsecurity@proton.me>
>
> fdp_nci_i2c_read() reads the length of the next packet from the device
> into phy->next_read_size and uses it as the i2c_master_recv() byte count
> into a fixed on-stack buffer:
>
> u8 tmp[FDP_NCI_I2C_MAX_PAYLOAD]; /* 261 bytes */
> ...
> len = phy->next_read_size;
> r = i2c_master_recv(client, tmp, len);
>
> When a "length packet" arrives (tmp[0] == 0 && tmp[1] == 0), the next
> length is taken verbatim from two device-supplied bytes:
>
> phy->next_read_size = (tmp[2] << 8) + tmp[3] + 3;
>
> next_read_size is a u16, so this can be driven as high as 65535 - far
> larger than the 261-byte tmp[] buffer - and it is never bounded before
> the next iteration's i2c_master_recv(). A malfunctioning, malicious or
> counterfeit FDP NFC controller (or an attacker tampering with the I2C
> bus) that sends such a length packet makes i2c_master_recv() write up to
> about 64 KB into the 261-byte on-stack buffer: a stack out-of-bounds
> write that clobbers the stack canary, saved registers and the return
> address.
>
> Reject a next_read_size larger than the receive buffer the same way a
> corrupted packet is already handled - drop it and force resynchronization
> - so a device can never drive an over-length read.
>
> Fixes: a06347c04c13 ("NFC: Add Intel Fields Peak NFC solution driver")
> Cc: stable@vger.kernel.org
> Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
> ---
> I reproduced the out-of-bounds write with an in-kernel test that drives
> the fdp_nci_i2c_read() buffer geometry verbatim under KASAN
> (CONFIG_KASAN_STACK=y), modelling i2c_master_recv() delivering
> next_read_size device bytes into the 261-byte tmp[] buffer:
>
> next_read_size = 281, no bound:
> BUG: KASAN: stack-out-of-bounds in i2c_master_recv...
> Write of size 281 ... [48, 309) 'tmp' (the 261-byte buffer)
> with the device length bounded to <= FDP_NCI_I2C_MAX_PAYLOAD (what this
> patch enforces): no KASAN report.
> a well-formed packet (length <= 261) is unaffected, no KASAN report.
>
> The full device range - next_read_size = 65535 (tmp[2] = 0xff,
> tmp[3] = 0xfc; the u16 field truncates the + 3), a 65535-byte write =
> 65274 bytes past the buffer, smashing the stack canary and the return
> address - reproduces the same way under userspace AddressSanitizer on
> both -m32 and -m64.
> ---
> drivers/nfc/fdp/i2c.c | 14 ++++++++++++++
> 1 file changed, 14 insertions(+)
>
> diff --git a/drivers/nfc/fdp/i2c.c b/drivers/nfc/fdp/i2c.c
> index c1896a1d978c..0392bb49bb4b 100644
> --- a/drivers/nfc/fdp/i2c.c
> +++ b/drivers/nfc/fdp/i2c.c
> @@ -166,6 +166,20 @@ static int fdp_nci_i2c_read(struct fdp_i2c_phy *phy, struct sk_buff **skb)
> /* Packet that contains a length */
> if (tmp[0] == 0 && tmp[1] == 0) {
> phy->next_read_size = (tmp[2] << 8) + tmp[3] + 3;
> +
> + /*
> + * next_read_size is taken from the device and is used
> + * as the i2c_master_recv() count on the next iteration.
> + * A value larger than the receive buffer would overflow
> + * tmp[]; treat it like a corrupted packet and force
> + * resynchronization.
> + */
> + if (phy->next_read_size > FDP_NCI_I2C_MAX_PAYLOAD) {
> + dev_dbg(&client->dev, "%s: corrupted packet\n",
> + __func__);
> + phy->next_read_size = FDP_NCI_I2C_MIN_PAYLOAD;
> + goto flush;
> + }
Hi Bryam,
Just sharing because I find it curious, this issue has already been
addressed 9 years ago (August 2017) in Google's Android kernel:
https://android-review.googlesource.com/c/kernel/common/+/461836
Would've been nice if they would have shared it back then...
Regards
Luca
> } else {
> phy->next_read_size = FDP_NCI_I2C_MIN_PAYLOAD;
>
>
> ---
> base-commit: 8e65320d91cdc3b241d4b94855c88459b91abf66
> change-id: 20260615-b4-disp-f42dce2d-055035ea37ba
>
> Best regards,
prev parent reply other threads:[~2026-11-16 9:57 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-15 8:04 [PATCH] nfc: fdp: reject an oversized device-reported packet length Bryam Vargas via B4 Relay
2026-06-16 9:00 ` Simon Horman
2026-06-17 4:41 ` Bryam Vargas
2026-11-16 9:57 ` Luca Weiss [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=DMWJOF3M99U0.3G5IY77AS4CWQ@fairphone.com \
--to=luca.weiss@fairphone.com \
--cc=david@ixit.cz \
--cc=hexlabsecurity@proton.me \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=oe-linux-nfc@lists.linux.dev \
--cc=robert.dolca@intel.com \
--cc=sameo@linux.intel.com \
--cc=void0red@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox