From: janitor@sternwelten.at
To: jgarzik@pobox.com
Cc: netdev@oss.sgi.com, janitor@sternwelten.at, domen@coderock.org
Subject: [patch 1/4] net/ne2k-pci: module_param conversion
Date: Sat, 20 Nov 2004 03:45:00 +0100 [thread overview]
Message-ID: <E1CVLFE-0002CL-PU@sputnik> (raw)
Hi.
Simple module_param_array conversions.
Get rid of debug option, since it's only used once.
Add some KERN_* constants to printk's.
Compile tested.
Signed-off-by: Domen Puncer <domen@coderock.org>
Signed-off-by: Maximilian Attems <janitor@sternwelten.at>
---
linux-2.6.10-rc2-bk4-max/drivers/net/ne2k-pci.c | 25 +++++++-----------------
1 files changed, 8 insertions(+), 17 deletions(-)
diff -puN drivers/net/ne2k-pci.c~module_parm-net_ne2k-pci drivers/net/ne2k-pci.c
--- linux-2.6.10-rc2-bk4/drivers/net/ne2k-pci.c~module_parm-net_ne2k-pci 2004-11-20 03:04:54.000000000 +0100
+++ linux-2.6.10-rc2-bk4-max/drivers/net/ne2k-pci.c 2004-11-20 03:04:54.000000000 +0100
@@ -29,12 +29,6 @@
#define DRV_VERSION "1.03"
#define DRV_RELDATE "9/22/2003"
-
-/* The user-configurable values.
- These may be modified when a driver module is loaded.*/
-
-static int debug = 1; /* 1 normal messages, 0 quiet .. 7 verbose. */
-
#define MAX_UNITS 8 /* More are supported, limit only on options */
/* Used to pass the full-duplex flag, etc. */
static int full_duplex[MAX_UNITS];
@@ -77,10 +71,8 @@ MODULE_AUTHOR("Donald Becker / Paul Gort
MODULE_DESCRIPTION("PCI NE2000 clone driver");
MODULE_LICENSE("GPL");
-MODULE_PARM(debug, "i");
-MODULE_PARM(options, "1-" __MODULE_STRING(MAX_UNITS) "i");
-MODULE_PARM(full_duplex, "1-" __MODULE_STRING(MAX_UNITS) "i");
-MODULE_PARM_DESC(debug, "debug level (1-2)");
+module_param_array(options, int, NULL, 0);
+module_param_array(full_duplex, int, NULL, 0);
MODULE_PARM_DESC(options, "Bit 5: full duplex");
MODULE_PARM_DESC(full_duplex, "full duplex setting(s) (1)");
@@ -366,7 +358,7 @@ static int __devinit ne2k_pci_init_one (
if (i)
goto err_out_free_netdev;
- printk("%s: %s found at %#lx, IRQ %d, ",
+ printk(KERN_INFO "%s: %s found at %#lx, IRQ %d, ",
dev->name, pci_clone_list[chip_idx].name, ioaddr, dev->irq);
for(i = 0; i < 6; i++) {
printk("%2.2X%s", SA_prom[i], i == 5 ? ".\n": ":");
@@ -443,8 +435,7 @@ static void ne2k_pci_reset_8390(struct n
{
unsigned long reset_start_time = jiffies;
- if (debug > 1) printk("%s: Resetting the 8390 t=%ld...",
- dev->name, jiffies);
+ printk(KERN_INFO "%s: Resetting the 8390 t=%ld...", dev->name, jiffies);
outb(inb(NE_BASE + NE_RESET), NE_BASE + NE_RESET);
@@ -454,7 +445,7 @@ static void ne2k_pci_reset_8390(struct n
/* This check _should_not_ be necessary, omit eventually. */
while ((inb(NE_BASE+EN0_ISR) & ENISR_RESET) == 0)
if (jiffies - reset_start_time > 2) {
- printk("%s: ne2k_pci_reset_8390() did not complete.\n", dev->name);
+ printk(KERN_NOTICE "%s: ne2k_pci_reset_8390() did not complete.\n", dev->name);
break;
}
outb(ENISR_RESET, NE_BASE + EN0_ISR); /* Ack intr. */
@@ -471,7 +462,7 @@ static void ne2k_pci_get_8390_hdr(struct
/* This *shouldn't* happen. If it does, it's the last thing you'll see */
if (ei_status.dmaing) {
- printk("%s: DMAing conflict in ne2k_pci_get_8390_hdr "
+ printk(KERN_ERR "%s: DMAing conflict in ne2k_pci_get_8390_hdr "
"[DMAstat:%d][irqlock:%d].\n",
dev->name, ei_status.dmaing, ei_status.irqlock);
return;
@@ -509,7 +500,7 @@ static void ne2k_pci_block_input(struct
/* This *shouldn't* happen. If it does, it's the last thing you'll see */
if (ei_status.dmaing) {
- printk("%s: DMAing conflict in ne2k_pci_block_input "
+ printk(KERN_ERR "%s: DMAing conflict in ne2k_pci_block_input "
"[DMAstat:%d][irqlock:%d].\n",
dev->name, ei_status.dmaing, ei_status.irqlock);
return;
@@ -564,7 +555,7 @@ static void ne2k_pci_block_output(struct
/* This *shouldn't* happen. If it does, it's the last thing you'll see */
if (ei_status.dmaing) {
- printk("%s: DMAing conflict in ne2k_pci_block_output."
+ printk(KERN_ERR "%s: DMAing conflict in ne2k_pci_block_output."
"[DMAstat:%d][irqlock:%d]\n",
dev->name, ei_status.dmaing, ei_status.irqlock);
return;
_
next reply other threads:[~2004-11-20 2:45 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-11-20 2:45 janitor [this message]
2004-11-24 20:05 ` [patch 1/4] net/ne2k-pci: module_param conversion Jeff Garzik
2004-11-24 20:43 ` Domen Puncer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E1CVLFE-0002CL-PU@sputnik \
--to=janitor@sternwelten.at \
--cc=domen@coderock.org \
--cc=jgarzik@pobox.com \
--cc=netdev@oss.sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).