From: Russell King <rmk+kernel@arm.linux.org.uk>
To: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: [PATCH A 10/12] net: fec: clean up transmit descriptor setup
Date: Tue, 08 Jul 2014 00:23:19 +0100 [thread overview]
Message-ID: <E1X4IFj-0004xI-VT@rmk-PC.arm.linux.org.uk> (raw)
In-Reply-To: <20140707232148.GG21766@n2100.arm.linux.org.uk>
Avoid writing any state until we're certain we can proceed with the
transmission: this avoids writing mapping error address values to the
descriptors, or setting the skbuff pointer until we have successfully
mapped the skb.
Acked-by: Fugang Duan <B38611@freescale.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
drivers/net/ethernet/freescale/fec_main.c | 33 +++++++++++++++++--------------
1 file changed, 18 insertions(+), 15 deletions(-)
diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index 70853a59627a..9c5570a3e32e 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -373,6 +373,7 @@ fec_enet_txq_submit_frag_skb(struct sk_buff *skb, struct net_device *ndev)
skb_frag_t *this_frag;
unsigned int index;
void *bufaddr;
+ dma_addr_t addr;
int i;
for (frag = 0; frag < nr_frags; frag++) {
@@ -415,15 +416,16 @@ fec_enet_txq_submit_frag_skb(struct sk_buff *skb, struct net_device *ndev)
swap_buffer(bufaddr, frag_len);
}
- bdp->cbd_bufaddr = dma_map_single(&fep->pdev->dev, bufaddr,
- frag_len, DMA_TO_DEVICE);
- if (dma_mapping_error(&fep->pdev->dev, bdp->cbd_bufaddr)) {
+ addr = dma_map_single(&fep->pdev->dev, bufaddr, frag_len,
+ DMA_TO_DEVICE);
+ if (dma_mapping_error(&fep->pdev->dev, addr)) {
dev_kfree_skb_any(skb);
if (net_ratelimit())
netdev_err(ndev, "Tx DMA memory map failed\n");
goto dma_mapping_error;
}
+ bdp->cbd_bufaddr = addr;
bdp->cbd_datlen = frag_len;
bdp->cbd_sc = status;
}
@@ -450,6 +452,7 @@ static int fec_enet_txq_submit_skb(struct sk_buff *skb, struct net_device *ndev)
int nr_frags = skb_shinfo(skb)->nr_frags;
struct bufdesc *bdp, *last_bdp;
void *bufaddr;
+ dma_addr_t addr;
unsigned short status;
unsigned short buflen;
unsigned int estatus = 0;
@@ -490,12 +493,9 @@ static int fec_enet_txq_submit_skb(struct sk_buff *skb, struct net_device *ndev)
swap_buffer(bufaddr, buflen);
}
- /* Push the data cache so the CPM does not get stale memory
- * data.
- */
- bdp->cbd_bufaddr = dma_map_single(&fep->pdev->dev, bufaddr,
- buflen, DMA_TO_DEVICE);
- if (dma_mapping_error(&fep->pdev->dev, bdp->cbd_bufaddr)) {
+ /* Push the data cache so the CPM does not get stale memory data. */
+ addr = dma_map_single(&fep->pdev->dev, bufaddr, buflen, DMA_TO_DEVICE);
+ if (dma_mapping_error(&fep->pdev->dev, addr)) {
dev_kfree_skb_any(skb);
if (net_ratelimit())
netdev_err(ndev, "Tx DMA memory map failed\n");
@@ -537,6 +537,7 @@ static int fec_enet_txq_submit_skb(struct sk_buff *skb, struct net_device *ndev)
fep->tx_skbuff[index] = skb;
bdp->cbd_datlen = buflen;
+ bdp->cbd_bufaddr = addr;
/* Send it on its way. Tell FEC it's ready, interrupt when done,
* it's the last BD of the frame, and to put the CRC on the end.
@@ -570,12 +571,12 @@ fec_enet_txq_put_data_tso(struct sk_buff *skb, struct net_device *ndev,
struct bufdesc_ex *ebdp = (struct bufdesc_ex *)bdp;
unsigned short status;
unsigned int estatus = 0;
+ dma_addr_t addr;
status = bdp->cbd_sc;
status &= ~BD_ENET_TX_STATS;
status |= (BD_ENET_TX_TC | BD_ENET_TX_READY);
- bdp->cbd_datlen = size;
if (((unsigned long) data) & FEC_ALIGNMENT ||
id_entry->driver_data & FEC_QUIRK_SWAP_FRAME) {
@@ -586,15 +587,17 @@ fec_enet_txq_put_data_tso(struct sk_buff *skb, struct net_device *ndev,
swap_buffer(data, size);
}
- bdp->cbd_bufaddr = dma_map_single(&fep->pdev->dev, data,
- size, DMA_TO_DEVICE);
- if (dma_mapping_error(&fep->pdev->dev, bdp->cbd_bufaddr)) {
+ addr = dma_map_single(&fep->pdev->dev, data, size, DMA_TO_DEVICE);
+ if (dma_mapping_error(&fep->pdev->dev, addr)) {
dev_kfree_skb_any(skb);
if (net_ratelimit())
netdev_err(ndev, "Tx DMA memory map failed\n");
return NETDEV_TX_BUSY;
}
+ bdp->cbd_datlen = size;
+ bdp->cbd_bufaddr = addr;
+
if (fep->bufdesc_ex) {
if (skb->ip_summed == CHECKSUM_PARTIAL)
estatus |= BD_ENET_TX_PINS | BD_ENET_TX_IINS;
@@ -801,7 +804,7 @@ static void fec_enet_bd_init(struct net_device *dev)
/* Initialize the BD for every fragment in the page. */
bdp->cbd_sc = 0;
- if (bdp->cbd_bufaddr && fep->tx_skbuff[i]) {
+ if (fep->tx_skbuff[i]) {
dev_kfree_skb_any(fep->tx_skbuff[i]);
fep->tx_skbuff[i] = NULL;
}
@@ -1100,6 +1103,7 @@ fec_enet_tx(struct net_device *ndev)
index = fec_enet_get_bd_index(fep->tx_bd_base, bdp, fep);
skb = fep->tx_skbuff[index];
+ fep->tx_skbuff[index] = NULL;
if (!IS_TSO_HEADER(fep, bdp->cbd_bufaddr))
dma_unmap_single(&fep->pdev->dev, bdp->cbd_bufaddr,
bdp->cbd_datlen, DMA_TO_DEVICE);
@@ -1154,7 +1158,6 @@ fec_enet_tx(struct net_device *ndev)
/* Free the sk buffer associated with this last transmit */
dev_kfree_skb_any(skb);
- fep->tx_skbuff[index] = NULL;
fep->dirty_tx = bdp;
--
1.8.3.1
next prev parent reply other threads:[~2014-07-07 23:23 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-07 23:21 [PATCH A 00/12] Freescale ethernet driver updates Russell King - ARM Linux
2014-07-07 23:22 ` [PATCH A 01/12] net: fec: iMX6 FEC does not support half-duplex gigabit Russell King
2014-07-08 16:52 ` Sergei Shtylyov
2014-07-07 23:22 ` [PATCH A 02/12] net: fec: fix ethtool set_pauseparam duplex bug Russell King
2014-07-07 23:22 ` [PATCH A 03/12] net: fec: fix interrupt handling races Russell King
2014-07-07 23:22 ` [PATCH A 04/12] net: fec: use netif_tx_disable() rather than netif_stop_queue() Russell King
2014-07-07 23:22 ` [PATCH A 05/12] net: fec: remove checking for NULL phy_dev in fec_enet_close() Russell King
2014-07-07 23:22 ` [PATCH A 06/12] net: fec: ensure that a disconnected phy isn't configured Russell King
2014-07-07 23:23 ` [PATCH A 07/12] net: fec: stop the phy before shutting down the MAC Russell King
2014-07-07 23:23 ` [PATCH A 08/12] net: fec: remove useless fep->opened Russell King
2014-07-07 23:23 ` [PATCH A 09/12] net: fec: make rx skb handling more robust Russell King
2014-07-07 23:23 ` Russell King [this message]
2014-07-07 23:23 ` [PATCH A 11/12] net: fec: ensure fec_enet_free_buffers() properly cleans the rings Russell King
2014-07-07 23:23 ` [PATCH A 12/12] net: fec: fix missing kmalloc() failure check in fec_enet_alloc_buffers() Russell King
2014-07-08 4:22 ` [PATCH A 00/12] Freescale ethernet driver updates David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E1X4IFj-0004xI-VT@rmk-PC.arm.linux.org.uk \
--to=rmk+kernel@arm.linux.org.uk \
--cc=davem@davemloft.net \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).