[PATCH net-next] net: phylink: propagate phy_attach_direct() return code

[Russell King <rmk+kernel@armlinux.org.uk>]

of_phy_attach() hides the return value of phy_attach_direct(), forcing
us to return a "generic" ENODEV error code that is indistinguishable
from the lack-of-phy-property case.

Switch to using of_phy_find_device() to find the PHY device, and then
propagating any phy_attach_direct() error back to the caller.

Link: https://lore.kernel.org/lkml/20191210113829.GT25745@shell.armlinux.org.uk
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
 drivers/net/phy/phylink.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index f7c660bf99d1..8d20cf3ba0b7 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -859,14 +859,17 @@ int phylink_of_phy_connect(struct phylink *pl, struct device_node *dn,
 		return 0;
 	}
 
-	phy_dev = of_phy_attach(pl->netdev, phy_node, flags,
-				pl->link_interface);
+	phy_dev = of_phy_find_device(phy_node);
 	/* We're done with the phy_node handle */
 	of_node_put(phy_node);
-
 	if (!phy_dev)
 		return -ENODEV;
 
+	ret = phy_attach_direct(pl->netdev, phy_dev, flags,
+				pl->link_interface);
+	if (ret)
+		return ret;
+
 	ret = phylink_bringup_phy(pl, phy_dev, pl->link_config.interface);
 	if (ret)
 		phy_detach(phy_dev);
-- 
2.20.1