[PATCH net-next 04/10] net: dsa: mv88e6xxx: use BMCR definitions for serdes control register

[Russell King <rmk+kernel@armlinux.org.uk>]

The SGMII/1000base-X serdes register set is a clause 22 register set
offset at 0x2000 in the PHYXS device. Rather than inventing our own
defintions, use those that already exist, and name the register
MV88E6390_SGMII_BMCR.  Also remove the unused MV88E6390_SGMII_STATUS
definitions.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
 drivers/net/dsa/mv88e6xxx/serdes.c | 10 ++++------
 drivers/net/dsa/mv88e6xxx/serdes.h |  9 +--------
 2 files changed, 5 insertions(+), 14 deletions(-)

diff --git a/drivers/net/dsa/mv88e6xxx/serdes.c b/drivers/net/dsa/mv88e6xxx/serdes.c
index 238219787233..37d7fd132f4e 100644
--- a/drivers/net/dsa/mv88e6xxx/serdes.c
+++ b/drivers/net/dsa/mv88e6xxx/serdes.c
@@ -410,20 +410,18 @@ static int mv88e6390_serdes_power_sgmii(struct mv88e6xxx_chip *chip, u8 lane,
 	int err;
 
 	err = mv88e6390_serdes_read(chip, lane, MDIO_MMD_PHYXS,
-				    MV88E6390_SGMII_CONTROL, &val);
+				    MV88E6390_SGMII_BMCR, &val);
 	if (err)
 		return err;
 
 	if (up)
-		new_val = val & ~(MV88E6390_SGMII_CONTROL_RESET |
-				  MV88E6390_SGMII_CONTROL_LOOPBACK |
-				  MV88E6390_SGMII_CONTROL_PDOWN);
+		new_val = val & ~(BMCR_RESET | BMCR_LOOPBACK | BMCR_PDOWN);
 	else
-		new_val = val | MV88E6390_SGMII_CONTROL_PDOWN;
+		new_val = val | BMCR_PDOWN;
 
 	if (val != new_val)
 		err = mv88e6390_serdes_write(chip, lane, MDIO_MMD_PHYXS,
-					     MV88E6390_SGMII_CONTROL, new_val);
+					     MV88E6390_SGMII_BMCR, new_val);
 
 	return err;
 }
diff --git a/drivers/net/dsa/mv88e6xxx/serdes.h b/drivers/net/dsa/mv88e6xxx/serdes.h
index 1906b3ab29c6..15169a1cfd05 100644
--- a/drivers/net/dsa/mv88e6xxx/serdes.h
+++ b/drivers/net/dsa/mv88e6xxx/serdes.h
@@ -47,14 +47,7 @@
 #define MV88E6390_PCS_CONTROL_1_PDOWN		BIT(11)
 
 /* 1000BASE-X and SGMII */
-#define MV88E6390_SGMII_CONTROL		0x2000
-#define MV88E6390_SGMII_CONTROL_RESET		BIT(15)
-#define MV88E6390_SGMII_CONTROL_LOOPBACK	BIT(14)
-#define MV88E6390_SGMII_CONTROL_PDOWN		BIT(11)
-#define MV88E6390_SGMII_STATUS		0x2001
-#define MV88E6390_SGMII_STATUS_AN_DONE		BIT(5)
-#define MV88E6390_SGMII_STATUS_REMOTE_FAULT	BIT(4)
-#define MV88E6390_SGMII_STATUS_LINK		BIT(2)
+#define MV88E6390_SGMII_BMCR		(0x2000 + MII_BMCR)
 #define MV88E6390_SGMII_INT_ENABLE	0xa001
 #define MV88E6390_SGMII_INT_SPEED_CHANGE	BIT(14)
 #define MV88E6390_SGMII_INT_DUPLEX_CHANGE	BIT(13)
-- 
2.20.1