netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Russell King <rmk+kernel@armlinux.org.uk>
To: Andrew Lunn <andrew@lunn.ch>, Heiner Kallweit <hkallweit1@gmail.com>
Cc: Jeremy Linton <jeremy.linton@arm.com>,
	Florian Fainelli <f.fainelli@gmail.com>,
	netdev@vger.kernel.org
Subject: [PATCH RFC 5/7] net: phy: set devices_in_package only after validation
Date: Tue, 26 May 2020 15:31:21 +0100	[thread overview]
Message-ID: <E1jdabx-0005sh-T7@rmk-PC.armlinux.org.uk> (raw)
In-Reply-To: <20200526142948.GY1551@shell.armlinux.org.uk>

Only set the devices_in_package to a non-zero value if we find a valid
value for this field, so we avoid leaving it set to e.g. 0x1fffffff.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
 drivers/net/phy/phy_device.c | 17 ++++++++++-------
 1 file changed, 10 insertions(+), 7 deletions(-)

diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index fa9164ac0f3d..a483d79cfc87 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -730,13 +730,13 @@ static int get_phy_c45_ids(struct mii_bus *bus, int addr, u32 *phy_id,
 			   struct phy_c45_device_ids *c45_ids)
 {
 	const int num_ids = ARRAY_SIZE(c45_ids->device_ids);
-	u32 *devs = &c45_ids->devices_in_package;
+	u32 devs_in_pkg = 0;
 	int i, ret, phy_reg;
 
 	/* Find first non-zero Devices In package. Device zero is reserved
 	 * for 802.3 c45 complied PHYs, so don't probe it at first.
 	 */
-	for (i = 1; i < MDIO_MMD_NUM && *devs == 0; i++) {
+	for (i = 1; i < MDIO_MMD_NUM && devs_in_pkg == 0; i++) {
 		if (i >= 8) {
 			/* Only probe for the devices-in-package if there
 			 * is a PHY reporting as present here; this avoids
@@ -750,22 +750,22 @@ static int get_phy_c45_ids(struct mii_bus *bus, int addr, u32 *phy_id,
 			if (!ret)
 				continue;
 		}
-		phy_reg = get_phy_c45_devs_in_pkg(bus, addr, i, devs);
+		phy_reg = get_phy_c45_devs_in_pkg(bus, addr, i, &devs_in_pkg);
 		if (phy_reg < 0)
 			return -EIO;
 	}
 
-	if ((*devs & 0x1fffffff) == 0x1fffffff) {
+	if ((devs_in_pkg & 0x1fffffff) == 0x1fffffff) {
 		/* If mostly Fs, there is no device there, then let's probe
 		 * MMD 0, as some 10G PHYs have zero Devices In package,
 		 * e.g. Cortina CS4315/CS4340 PHY.
 		 */
-		phy_reg = get_phy_c45_devs_in_pkg(bus, addr, 0, devs);
+		phy_reg = get_phy_c45_devs_in_pkg(bus, addr, 0, &devs_in_pkg);
 		if (phy_reg < 0)
 			return -EIO;
 
 		/* no device there, let's get out of here */
-		if ((*devs & 0x1fffffff) == 0x1fffffff) {
+		if ((devs_in_pkg & 0x1fffffff) == 0x1fffffff) {
 			*phy_id = 0xffffffff;
 			return 0;
 		}
@@ -773,7 +773,7 @@ static int get_phy_c45_ids(struct mii_bus *bus, int addr, u32 *phy_id,
 
 	/* Now probe Device Identifiers for each device present. */
 	for (i = 1; i < num_ids; i++) {
-		if (!(c45_ids->devices_in_package & (1 << i)))
+		if (!(devs_in_pkg & (1 << i)))
 			continue;
 
 		phy_reg = mdiobus_c45_read(bus, addr, i, MII_PHYSID1);
@@ -786,6 +786,9 @@ static int get_phy_c45_ids(struct mii_bus *bus, int addr, u32 *phy_id,
 			return -EIO;
 		c45_ids->device_ids[i] |= phy_reg;
 	}
+
+	c45_ids->devices_in_package = devs_in_pkg;
+
 	*phy_id = 0;
 	return 0;
 }
-- 
2.20.1


  parent reply	other threads:[~2020-05-26 14:31 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-26 14:29 [PATCH RFC 0/7] Clause 45 PHY probing cleanups Russell King - ARM Linux admin
2020-05-26 14:31 ` [PATCH RFC 1/7] net: mdiobus: add clause 45 mdiobus accessors Russell King
2020-05-26 14:39   ` Andrew Lunn
2020-05-26 15:21     ` Russell King - ARM Linux admin
2020-05-26 14:31 ` [PATCH RFC 2/7] net: phy: clean up cortina workaround Russell King
2020-05-26 14:31 ` [PATCH RFC 3/7] net: phy: clean up PHY ID reading Russell King
2020-05-26 15:38   ` Jeremy Linton
2020-05-26 15:46     ` Russell King - ARM Linux admin
2020-05-26 14:31 ` [PATCH RFC 4/7] net: phy: add support for probing MMDs >= 8 for devices-in-package Russell King
2020-05-26 17:14   ` Russell King - ARM Linux admin
2020-05-26 17:20     ` Jeremy Linton
2020-05-26 17:53       ` Russell King - ARM Linux admin
2020-05-26 14:31 ` Russell King [this message]
2020-05-26 15:39   ` [PATCH RFC 5/7] net: phy: set devices_in_package only after validation Jeremy Linton
2020-05-26 15:50     ` Russell King - ARM Linux admin
2020-05-26 16:33       ` Russell King - ARM Linux admin
2020-05-26 14:31 ` [PATCH RFC 6/7] net: phy: split devices_in_package Russell King
2020-05-26 15:39   ` Jeremy Linton
2020-05-26 15:47     ` Russell King - ARM Linux admin
2020-05-26 16:00       ` Russell King - ARM Linux admin
2020-05-26 14:31 ` [PATCH RFC 7/7] net: phy: read MMD ID from all present MMDs Russell King
2020-05-26 15:35   ` Jeremy Linton
2020-05-26 15:46     ` Russell King - ARM Linux admin
2020-05-26 15:43 ` [PATCH RFC 0/7] Clause 45 PHY probing cleanups Russell King - ARM Linux admin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=E1jdabx-0005sh-T7@rmk-PC.armlinux.org.uk \
    --to=rmk+kernel@armlinux.org.uk \
    --cc=andrew@lunn.ch \
    --cc=f.fainelli@gmail.com \
    --cc=hkallweit1@gmail.com \
    --cc=jeremy.linton@arm.com \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).