From: Russell King <rmk+kernel@armlinux.org.uk>
To: Andrew Lunn <andrew@lunn.ch>,
Florian Fainelli <f.fainelli@gmail.com>,
Heiner Kallweit <hkallweit1@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>,
netdev@vger.kernel.org, Vivien Didelot <vivien.didelot@gmail.com>,
Jakub Kicinski <kuba@kernel.org>
Subject: [PATCH net-next 1/3] net: dsa/bcm_sf2: fix incorrect usage of state->link
Date: Tue, 30 Jun 2020 11:28:08 +0100 [thread overview]
Message-ID: <E1jqDUm-0004tx-AN@rmk-PC.armlinux.org.uk> (raw)
In-Reply-To: <20200630102751.GA1551@shell.armlinux.org.uk>
state->link has never been valid in mac_config() implementations -
while it may be correct in some calls, it is not true that it can be
relied upon.
Fix bcm_sf2 to use the correct method of handling forced link status.
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
drivers/net/dsa/bcm_sf2.c | 28 ++++++++++++++++++++++++++--
1 file changed, 26 insertions(+), 2 deletions(-)
diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index 946e41f020a5..5a8759d2de6c 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -618,8 +618,6 @@ static void bcm_sf2_sw_mac_config(struct dsa_switch *ds, int port,
break;
}
- if (state->link)
- reg |= LINK_STS;
if (state->duplex == DUPLEX_FULL)
reg |= DUPLX_MODE;
@@ -650,6 +648,20 @@ static void bcm_sf2_sw_mac_link_down(struct dsa_switch *ds, int port,
unsigned int mode,
phy_interface_t interface)
{
+ struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
+ u32 reg, offset;
+
+ if (port != core_readl(priv, CORE_IMP0_PRT_ID)) {
+ if (priv->type == BCM7445_DEVICE_ID)
+ offset = CORE_STS_OVERRIDE_GMIIP_PORT(port);
+ else
+ offset = CORE_STS_OVERRIDE_GMIIP2_PORT(port);
+
+ reg = core_readl(priv, offset);
+ reg &= ~LINK_STS;
+ core_writel(priv, reg, offset);
+ }
+
bcm_sf2_sw_mac_link_set(ds, port, interface, false);
}
@@ -662,9 +674,21 @@ static void bcm_sf2_sw_mac_link_up(struct dsa_switch *ds, int port,
{
struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
struct ethtool_eee *p = &priv->dev->ports[port].eee;
+ u32 reg, offset;
bcm_sf2_sw_mac_link_set(ds, port, interface, true);
+ if (port != core_readl(priv, CORE_IMP0_PRT_ID)) {
+ if (priv->type == BCM7445_DEVICE_ID)
+ offset = CORE_STS_OVERRIDE_GMIIP_PORT(port);
+ else
+ offset = CORE_STS_OVERRIDE_GMIIP2_PORT(port);
+
+ reg = core_readl(priv, offset);
+ reg |= LINK_STS;
+ core_writel(priv, reg, offset);
+ }
+
if (mode == MLO_AN_PHY && phydev)
p->eee_enabled = b53_eee_init(ds, port, phydev);
}
--
2.20.1
next prev parent reply other threads:[~2020-06-30 10:28 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-30 10:27 [PATCH net-next 0/3] Convert Broadcom SF2 to mac_link_up() resolved state Russell King - ARM Linux admin
2020-06-30 10:28 ` Russell King [this message]
2020-06-30 10:28 ` [PATCH net-next 2/3] net: dsa/bcm_sf2: move speed/duplex forcing to mac_link_up() Russell King
2020-06-30 10:28 ` [PATCH net-next 3/3] net: dsa/bcm_sf2: move pause mode setting into mac_link_up() Russell King
2020-06-30 16:14 ` Jakub Kicinski
2020-06-30 20:05 ` [PATCH net-next 0/3] Convert Broadcom SF2 to mac_link_up() resolved state David Miller
2020-06-30 20:37 ` Russell King - ARM Linux admin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E1jqDUm-0004tx-AN@rmk-PC.armlinux.org.uk \
--to=rmk+kernel@armlinux.org.uk \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=hkallweit1@gmail.com \
--cc=kuba@kernel.org \
--cc=netdev@vger.kernel.org \
--cc=vivien.didelot@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).