[PATCH net] net: phylink: avoid mvneta warning when setting pause parameters

["Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>]

mvneta does not support asymetric pause modes, and it flags this by the
lack of AsymPause in the supported field. When setting pause modes, we
check that pause->rx_pause == pause->tx_pause, but only when pause
autoneg is enabled. When pause autoneg is disabled, we still allow
pause->rx_pause != pause->tx_pause, which is incorrect when the MAC
does not support asymetric pause, and causes mvneta to issue a warning.

Fix this by removing the test for pause->autoneg, so we always check
that pause->rx_pause == pause->tx_pause for network devices that do not
support AsymPause.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
 drivers/net/phy/phylink.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 0a0abe8e4be0..5defc721dd05 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -1724,7 +1724,7 @@ int phylink_ethtool_set_pauseparam(struct phylink *pl,
 		return -EOPNOTSUPP;
 
 	if (!phylink_test(pl->supported, Asym_Pause) &&
-	    !pause->autoneg && pause->rx_pause != pause->tx_pause)
+	    pause->rx_pause != pause->tx_pause)
 		return -EINVAL;
 
 	pause_state = 0;
-- 
2.30.2