netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
To: Chris Snook <chris.snook@gmail.com>,
	Oleksij Rempel <linux@rempel-privat.de>
Cc: "David S. Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>,
	netdev@vger.kernel.org
Subject: [PATCH net-next 3/3] net: ag71xx: use phylink_generic_validate()
Date: Wed, 17 Nov 2021 16:46:31 +0000	[thread overview]
Message-ID: <E1mnO4t-007ynF-0E@rmk-PC.armlinux.org.uk> (raw)
In-Reply-To: <YZUxxU30M4IgNNPi@shell.armlinux.org.uk>

ag71xx apparently only supports MII port type, which makes it different
from other implementations. However, Oleksij says there is no special
reason for this.

Convert the driver to use phylink_generic_validate(), which will allow
all ethtool port linkmodes instead of only MII, giving the driver
consistent behaviour with other drivers.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
 drivers/net/ethernet/atheros/ag71xx.c | 31 +++------------------------
 1 file changed, 3 insertions(+), 28 deletions(-)

diff --git a/drivers/net/ethernet/atheros/ag71xx.c b/drivers/net/ethernet/atheros/ag71xx.c
index 20c2cfdc30da..c747dc7984fd 100644
--- a/drivers/net/ethernet/atheros/ag71xx.c
+++ b/drivers/net/ethernet/atheros/ag71xx.c
@@ -1024,33 +1024,6 @@ static void ag71xx_mac_config(struct phylink_config *config, unsigned int mode,
 	ag71xx_wr(ag, AG71XX_REG_FIFO_CFG3, ag->fifodata[2]);
 }
 
-static void ag71xx_mac_validate(struct phylink_config *config,
-			    unsigned long *supported,
-			    struct phylink_link_state *state)
-{
-	__ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
-
-	phylink_set(mask, MII);
-
-	phylink_set(mask, Pause);
-	phylink_set(mask, Asym_Pause);
-	phylink_set(mask, Autoneg);
-	phylink_set(mask, 10baseT_Half);
-	phylink_set(mask, 10baseT_Full);
-	phylink_set(mask, 100baseT_Half);
-	phylink_set(mask, 100baseT_Full);
-
-	if (state->interface == PHY_INTERFACE_MODE_SGMII ||
-	    state->interface == PHY_INTERFACE_MODE_RGMII ||
-	    state->interface == PHY_INTERFACE_MODE_GMII) {
-		phylink_set(mask, 1000baseT_Full);
-		phylink_set(mask, 1000baseX_Full);
-	}
-
-	linkmode_and(supported, supported, mask);
-	linkmode_and(state->advertising, state->advertising, mask);
-}
-
 static void ag71xx_mac_pcs_get_state(struct phylink_config *config,
 				     struct phylink_link_state *state)
 {
@@ -1124,7 +1097,7 @@ static void ag71xx_mac_link_up(struct phylink_config *config,
 }
 
 static const struct phylink_mac_ops ag71xx_phylink_mac_ops = {
-	.validate = ag71xx_mac_validate,
+	.validate = phylink_generic_validate,
 	.mac_pcs_get_state = ag71xx_mac_pcs_get_state,
 	.mac_an_restart = ag71xx_mac_an_restart,
 	.mac_config = ag71xx_mac_config,
@@ -1138,6 +1111,8 @@ static int ag71xx_phylink_setup(struct ag71xx *ag)
 
 	ag->phylink_config.dev = &ag->ndev->dev;
 	ag->phylink_config.type = PHYLINK_NETDEV;
+	ag->phylink_config.mac_capabilities = MAC_SYM_PAUSE | MAC_ASYM_PAUSE |
+		MAC_10 | MAC_100 | MAC_1000FD;
 
 	if ((ag71xx_is(ag, AR9330) && ag->mac_idx == 0) ||
 	    ag71xx_is(ag, AR9340) ||
-- 
2.30.2


  parent reply	other threads:[~2021-11-17 16:46 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-11-17 16:45 [PATCH net-next 0/3] net: ag71xx: phylink validate implementation updates Russell King (Oracle)
2021-11-17 16:46 ` [PATCH net-next 1/3] net: ag71xx: populate supported_interfaces member Russell King
2021-11-17 16:46 ` [PATCH net-next 2/3] net: ag71xx: remove interface checks in ag71xx_mac_validate() Russell King (Oracle)
2021-11-17 16:46 ` Russell King (Oracle) [this message]
2021-11-18 11:40 ` [PATCH net-next 0/3] net: ag71xx: phylink validate implementation updates patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=E1mnO4t-007ynF-0E@rmk-PC.armlinux.org.uk \
    --to=rmk+kernel@armlinux.org.uk \
    --cc=chris.snook@gmail.com \
    --cc=davem@davemloft.net \
    --cc=kuba@kernel.org \
    --cc=linux@rempel-privat.de \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).