From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
To: netdev@vger.kernel.org
Cc: Andrew Lunn <andrew@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
Florian Fainelli <f.fainelli@gmail.com>,
Hauke Mehrtens <hauke@hauke-m.de>,
Jakub Kicinski <kuba@kernel.org>,
Kurt Kanzenbach <kurt@linutronix.de>,
Vivien Didelot <vivien.didelot@gmail.com>,
Vladimir Oltean <olteanv@gmail.com>
Subject: [PATCH net-next 5/5] net: dsa: lantiq: convert to phylink_generic_validate()
Date: Tue, 30 Nov 2021 13:10:16 +0000 [thread overview]
Message-ID: <E1ms2tk-00ECJT-Eb@rmk-PC.armlinux.org.uk> (raw)
In-Reply-To: <YaYiiU9nvmVugqnJ@shell.armlinux.org.uk>
Populate the supported interfaces and MAC capabilities for the Lantiq
DSA switches and remove the old validate implementation to allow DSA to
use phylink_generic_validate() for this switch driver.
The exclusion of Gigabit linkmodes for MII, Reverse MII and Reduced MII
links is handled within phylink_generic_validate() in phylink, so there
is no need to make them conditional on the interface mode in the driver.
Reviewed-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
drivers/net/dsa/lantiq_gswip.c | 120 +++++++++++----------------------
1 file changed, 38 insertions(+), 82 deletions(-)
diff --git a/drivers/net/dsa/lantiq_gswip.c b/drivers/net/dsa/lantiq_gswip.c
index 7056d98d8177..583af774e1bd 100644
--- a/drivers/net/dsa/lantiq_gswip.c
+++ b/drivers/net/dsa/lantiq_gswip.c
@@ -1438,114 +1438,70 @@ static int gswip_port_fdb_dump(struct dsa_switch *ds, int port,
return 0;
}
-static void gswip_phylink_set_capab(unsigned long *supported,
- struct phylink_link_state *state)
-{
- __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
-
- /* Allow all the expected bits */
- phylink_set(mask, Autoneg);
- phylink_set_port_modes(mask);
- phylink_set(mask, Pause);
- phylink_set(mask, Asym_Pause);
-
- /* With the exclusion of MII, Reverse MII and Reduced MII, we
- * support Gigabit, including Half duplex
- */
- if (state->interface != PHY_INTERFACE_MODE_MII &&
- state->interface != PHY_INTERFACE_MODE_REVMII &&
- state->interface != PHY_INTERFACE_MODE_RMII) {
- phylink_set(mask, 1000baseT_Full);
- phylink_set(mask, 1000baseT_Half);
- }
-
- phylink_set(mask, 10baseT_Half);
- phylink_set(mask, 10baseT_Full);
- phylink_set(mask, 100baseT_Half);
- phylink_set(mask, 100baseT_Full);
-
- linkmode_and(supported, supported, mask);
- linkmode_and(state->advertising, state->advertising, mask);
-}
-
-static void gswip_xrx200_phylink_validate(struct dsa_switch *ds, int port,
- unsigned long *supported,
- struct phylink_link_state *state)
+static void gswip_xrx200_phylink_get_caps(struct dsa_switch *ds, int port,
+ struct phylink_config *config)
{
switch (port) {
case 0:
case 1:
- if (!phy_interface_mode_is_rgmii(state->interface) &&
- state->interface != PHY_INTERFACE_MODE_MII &&
- state->interface != PHY_INTERFACE_MODE_REVMII &&
- state->interface != PHY_INTERFACE_MODE_RMII)
- goto unsupported;
+ phy_interface_set_rgmii(config->supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_MII,
+ config->supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_REVMII,
+ config->supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_RMII,
+ config->supported_interfaces);
break;
+
case 2:
case 3:
case 4:
- if (state->interface != PHY_INTERFACE_MODE_INTERNAL)
- goto unsupported;
+ __set_bit(PHY_INTERFACE_MODE_INTERNAL,
+ config->supported_interfaces);
break;
+
case 5:
- if (!phy_interface_mode_is_rgmii(state->interface) &&
- state->interface != PHY_INTERFACE_MODE_INTERNAL)
- goto unsupported;
+ phy_interface_set_rgmii(config->supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_INTERNAL,
+ config->supported_interfaces);
break;
- default:
- linkmode_zero(supported);
- dev_err(ds->dev, "Unsupported port: %i\n", port);
- return;
}
- gswip_phylink_set_capab(supported, state);
-
- return;
-
-unsupported:
- linkmode_zero(supported);
- dev_err(ds->dev, "Unsupported interface '%s' for port %d\n",
- phy_modes(state->interface), port);
+ config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
+ MAC_10 | MAC_100 | MAC_1000;
}
-static void gswip_xrx300_phylink_validate(struct dsa_switch *ds, int port,
- unsigned long *supported,
- struct phylink_link_state *state)
+static void gswip_xrx300_phylink_get_caps(struct dsa_switch *ds, int port,
+ struct phylink_config *config)
{
switch (port) {
case 0:
- if (!phy_interface_mode_is_rgmii(state->interface) &&
- state->interface != PHY_INTERFACE_MODE_GMII &&
- state->interface != PHY_INTERFACE_MODE_RMII)
- goto unsupported;
+ phy_interface_set_rgmii(config->supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_GMII,
+ config->supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_RMII,
+ config->supported_interfaces);
break;
+
case 1:
case 2:
case 3:
case 4:
- if (state->interface != PHY_INTERFACE_MODE_INTERNAL)
- goto unsupported;
+ __set_bit(PHY_INTERFACE_MODE_INTERNAL,
+ config->supported_interfaces);
break;
+
case 5:
- if (!phy_interface_mode_is_rgmii(state->interface) &&
- state->interface != PHY_INTERFACE_MODE_INTERNAL &&
- state->interface != PHY_INTERFACE_MODE_RMII)
- goto unsupported;
+ phy_interface_set_rgmii(config->supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_INTERNAL,
+ config->supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_RMII,
+ config->supported_interfaces);
break;
- default:
- linkmode_zero(supported);
- dev_err(ds->dev, "Unsupported port: %i\n", port);
- return;
}
- gswip_phylink_set_capab(supported, state);
-
- return;
-
-unsupported:
- linkmode_zero(supported);
- dev_err(ds->dev, "Unsupported interface '%s' for port %d\n",
- phy_modes(state->interface), port);
+ config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
+ MAC_10 | MAC_100 | MAC_1000;
}
static void gswip_port_set_link(struct gswip_priv *priv, int port, bool link)
@@ -1827,7 +1783,7 @@ static const struct dsa_switch_ops gswip_xrx200_switch_ops = {
.port_fdb_add = gswip_port_fdb_add,
.port_fdb_del = gswip_port_fdb_del,
.port_fdb_dump = gswip_port_fdb_dump,
- .phylink_validate = gswip_xrx200_phylink_validate,
+ .phylink_get_caps = gswip_xrx200_phylink_get_caps,
.phylink_mac_config = gswip_phylink_mac_config,
.phylink_mac_link_down = gswip_phylink_mac_link_down,
.phylink_mac_link_up = gswip_phylink_mac_link_up,
@@ -1851,7 +1807,7 @@ static const struct dsa_switch_ops gswip_xrx300_switch_ops = {
.port_fdb_add = gswip_port_fdb_add,
.port_fdb_del = gswip_port_fdb_del,
.port_fdb_dump = gswip_port_fdb_dump,
- .phylink_validate = gswip_xrx300_phylink_validate,
+ .phylink_get_caps = gswip_xrx300_phylink_get_caps,
.phylink_mac_config = gswip_phylink_mac_config,
.phylink_mac_link_down = gswip_phylink_mac_link_down,
.phylink_mac_link_up = gswip_phylink_mac_link_up,
--
2.30.2
next prev parent reply other threads:[~2021-11-30 13:10 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-30 13:09 [PATCH net-next 0/5] net: dsa: convert two drivers to phylink_generic_validate() Russell King (Oracle)
2021-11-30 13:09 ` [PATCH net-next 1/5] net: dsa: consolidate phylink creation Russell King (Oracle)
2021-11-30 15:41 ` Marek Behún
2021-11-30 15:43 ` Andrew Lunn
2021-11-30 13:10 ` [PATCH net-next 2/5] net: dsa: replace phylink_get_interfaces() with phylink_get_caps() Russell King (Oracle)
2021-11-30 15:42 ` Marek Behún
2021-11-30 15:48 ` Andrew Lunn
2021-11-30 13:10 ` [PATCH net-next 3/5] net: dsa: support use of phylink_generic_validate() Russell King (Oracle)
2021-11-30 15:43 ` Marek Behún
2021-11-30 15:49 ` Andrew Lunn
2021-11-30 13:10 ` [PATCH net-next 4/5] net: dsa: hellcreek: convert to phylink_generic_validate() Russell King (Oracle)
2021-11-30 13:10 ` Russell King (Oracle) [this message]
2021-12-02 3:20 ` [PATCH net-next 0/5] net: dsa: convert two drivers " patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E1ms2tk-00ECJT-Eb@rmk-PC.armlinux.org.uk \
--to=rmk+kernel@armlinux.org.uk \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=hauke@hauke-m.de \
--cc=kuba@kernel.org \
--cc=kurt@linutronix.de \
--cc=netdev@vger.kernel.org \
--cc=olteanv@gmail.com \
--cc=vivien.didelot@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).