[PATCH v2 net-next 4/7] net: mvpp2: convert to pcs_validate() and phylink_generic_validate()

["Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>]

Convert mvpp2 to validate the autoneg state for 1000base-X in the
pcs_validate() operation, rather than the MAC validate() operation.
This allows us to switch the MAC validate() to use
phylink_generic_validate().

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
 .../net/ethernet/marvell/mvpp2/mvpp2_main.c   | 37 +++++++++----------
 1 file changed, 17 insertions(+), 20 deletions(-)

diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
index f5e10fe7812b..c5e49bbf462f 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
@@ -6166,6 +6166,21 @@ static const struct phylink_pcs_ops mvpp2_phylink_xlg_pcs_ops = {
 	.pcs_config = mvpp2_xlg_pcs_config,
 };
 
+static int mvpp2_gmac_pcs_validate(struct phylink_pcs *pcs,
+				   unsigned long *supported,
+				   const struct phylink_link_state *state)
+{
+	/* When in 802.3z mode, we must have AN enabled:
+	 * Bit 2 Field InBandAnEn In-band Auto-Negotiation enable. ...
+	 * When <PortType> = 1 (1000BASE-X) this field must be set to 1.
+	 */
+	if (phy_interface_mode_is_8023z(state->interface) &&
+	    !phylink_test(state->advertising, Autoneg))
+		return -EINVAL;
+
+	return 0;
+}
+
 static void mvpp2_gmac_pcs_get_state(struct phylink_pcs *pcs,
 				     struct phylink_link_state *state)
 {
@@ -6270,30 +6285,12 @@ static void mvpp2_gmac_pcs_an_restart(struct phylink_pcs *pcs)
 }
 
 static const struct phylink_pcs_ops mvpp2_phylink_gmac_pcs_ops = {
+	.pcs_validate = mvpp2_gmac_pcs_validate,
 	.pcs_get_state = mvpp2_gmac_pcs_get_state,
 	.pcs_config = mvpp2_gmac_pcs_config,
 	.pcs_an_restart = mvpp2_gmac_pcs_an_restart,
 };
 
-static void mvpp2_phylink_validate(struct phylink_config *config,
-				   unsigned long *supported,
-				   struct phylink_link_state *state)
-{
-	/* When in 802.3z mode, we must have AN enabled:
-	 * Bit 2 Field InBandAnEn In-band Auto-Negotiation enable. ...
-	 * When <PortType> = 1 (1000BASE-X) this field must be set to 1.
-	 */
-	if (phy_interface_mode_is_8023z(state->interface) &&
-	    !phylink_test(state->advertising, Autoneg))
-		goto empty_set;
-
-	phylink_generic_validate(config, supported, state);
-	return;
-
-empty_set:
-	linkmode_zero(supported);
-}
-
 static void mvpp2_xlg_config(struct mvpp2_port *port, unsigned int mode,
 			     const struct phylink_link_state *state)
 {
@@ -6611,7 +6608,7 @@ static void mvpp2_mac_link_down(struct phylink_config *config,
 }
 
 static const struct phylink_mac_ops mvpp2_phylink_ops = {
-	.validate = mvpp2_phylink_validate,
+	.validate = phylink_generic_validate,
 	.mac_select_pcs = mvpp2_select_pcs,
 	.mac_prepare = mvpp2_mac_prepare,
 	.mac_config = mvpp2_mac_config,
-- 
2.30.2