netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
To: Alexandre Torgue <alexandre.torgue@foss.st.com>,
	Giuseppe Cavallaro <peppe.cavallaro@st.com>,
	Jose Abreu <Jose.Abreu@synopsys.com>,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Jose Abreu <joabreu@synopsys.com>,
	"David S. Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>,
	netdev@vger.kernel.org, linux-stm32@st-md-mailman.stormreply.com,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH CFT net-next 6/6] net: stmmac: convert to phylink_generic_validate()
Date: Thu, 16 Dec 2021 13:12:42 +0000	[thread overview]
Message-ID: <E1mxqYs-00GYZ3-To@rmk-PC.armlinux.org.uk> (raw)
In-Reply-To: <Ybs7DNDkBrf73jDi@shell.armlinux.org.uk>

Convert stmmac to use phylink_generic_validate() now that we have the
MAC capabilities and supported interfaces filled in, and we have the
PCS validation handled via the PCS operations.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
 .../net/ethernet/stmicro/stmmac/stmmac_main.c | 26 +------------------
 1 file changed, 1 insertion(+), 25 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 94f7282da006..ce3d9a789cef 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -936,30 +936,6 @@ static void stmmac_mac_flow_ctrl(struct stmmac_priv *priv, u32 duplex)
 			priv->pause, tx_cnt);
 }
 
-static void stmmac_validate(struct phylink_config *config,
-			    unsigned long *supported,
-			    struct phylink_link_state *state)
-{
-	struct stmmac_priv *priv = netdev_priv(to_net_dev(config->dev));
-	__ETHTOOL_DECLARE_LINK_MODE_MASK(mac_supported) = { 0, };
-
-	/* This is very similar to phylink_generic_validate() except that
-	 * we always use PHY_INTERFACE_MODE_INTERNAL to get all capabilities.
-	 * This is because we don't always have config->supported_interfaces
-	 * populated (only when we have the XPCS.)
-	 *
-	 * When we do have an XPCS, we could pass state->interface, as XPCS
-	 * limits to a subset of the ethtool link modes allowed here.
-	 */
-	phylink_set(mac_supported, Autoneg);
-	phylink_set_port_modes(mac_supported);
-	phylink_get_linkmodes(mac_supported, PHY_INTERFACE_MODE_INTERNAL,
-			      config->mac_capabilities);
-
-	linkmode_and(supported, supported, mac_supported);
-	linkmode_and(state->advertising, state->advertising, mac_supported);
-}
-
 static void stmmac_mac_config(struct phylink_config *config, unsigned int mode,
 			      const struct phylink_link_state *state)
 {
@@ -1096,7 +1072,7 @@ static void stmmac_mac_link_up(struct phylink_config *config,
 }
 
 static const struct phylink_mac_ops stmmac_phylink_mac_ops = {
-	.validate = stmmac_validate,
+	.validate = phylink_generic_validate,
 	.mac_config = stmmac_mac_config,
 	.mac_link_down = stmmac_mac_link_down,
 	.mac_link_up = stmmac_mac_link_up,
-- 
2.30.2


  parent reply	other threads:[~2021-12-16 13:12 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-12-16 13:11 [PATCH CFT net-next 0/6] net: stmmac/xpcs: modernise PCS support Russell King (Oracle)
2021-12-16 13:12 ` [PATCH CFT net-next 1/6] net: xpcs: add support for retrieving supported interface modes Russell King (Oracle)
2021-12-16 13:12 ` [PATCH CFT net-next 2/6] net: stmmac: convert to phylink_get_linkmodes() Russell King (Oracle)
2021-12-16 13:12 ` [PATCH CFT net-next 3/6] net: stmmac: fill in supported_interfaces Russell King (Oracle)
2021-12-16 13:12 ` [PATCH CFT net-next 4/6] net: stmmac/xpcs: convert to pcs_validate() Russell King (Oracle)
2021-12-16 13:12 ` [PATCH CFT net-next 5/6] net: stmmac: remove phylink_config.pcs_poll usage Russell King (Oracle)
2021-12-16 13:12 ` Russell King (Oracle) [this message]
2021-12-17  5:57 ` [PATCH CFT net-next 0/6] net: stmmac/xpcs: modernise PCS support Wong Vee Khee
2022-01-07 13:40   ` Russell King (Oracle)
2022-01-07 13:47     ` Wong Vee Khee

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=E1mxqYs-00GYZ3-To@rmk-PC.armlinux.org.uk \
    --to=rmk+kernel@armlinux.org.uk \
    --cc=Jose.Abreu@synopsys.com \
    --cc=alexandre.torgue@foss.st.com \
    --cc=davem@davemloft.net \
    --cc=joabreu@synopsys.com \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=netdev@vger.kernel.org \
    --cc=peppe.cavallaro@st.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).